Manualshelf

T87 Range Stops

ManualsBrandsHoneywell ManualsThermostatsRound Non-Programmable Thermostat Heat/Cool or Pump
12345678
Table Of Contents
INSTALLATION INSTRUCTIONS
69-1864EFS-01
T87 Range Stops
APPLICATION
Use the 50010944-001 range stops with the T87K, N
thermostats to limit the minimum and maximum
temperature settings.
The 50010944-001 contains two range stop scales
and two #2-28 x 3/8 phillips pan head screws.
Fig. 1. Range stop and screws (Fahrenheit range).
Fig. 2. Range stop and screws (Celsius range).
INSTALLATION
1. Set the thermostat to a temperature setting in
the middle of the upper and lower range
desired.
2. Remove the thermostat from its base (if already
attached).
3. On the back of the thermostat, align the range
stop with the holes on the back of the thermo-
stat. See Fig. 3.
Fig. 3. Aligning range stop with thermostat.
4. Using the temperature markings on the range
stop, insert supplied screws into the minimum
and/or maximum range stop holes and tighten.
Refer to Tables 1 and 2 for range stop tempera-
tures. See Figs. 4 and 5.
5. Mount the thermostat onto its base and set
desired temperature. See Fig. 5.
80
70
60
50
M13675
HIGH LIMIT
SETTING
LOW LIMIT
SETTING
SCREW (2)
RANGE STOP
26
20
15
09
M13676
HIGH LIMIT
SETTING
LOW LIMIT
SETTING
SCREW (2)
RANGE STOP
80
70
60
5
0
M13679

Summary of content (8 pages)