Honeywell T675F CROP-TROLL CONTROLLER PROVIDES CONTROL OF OIL BURNING PORTABLE CROP DRYERS OR SIMILAR EQUIPMENT. CONTROLLER CAN MOUNT DIRECTLY ON THE DRYER WITH SENSING BULB MOUNTED IN THE DISCHARGE AIR DUCT. Il Knob extends through case for manual control point adjustment, 0 Differential setting wheel, located under cover, adjusts difference between cut-in and cut-out temperatures. 8.P. Form No. REV. 2.83 80-2213—2 © Honeywell ing.
MODEL: T675F Crop-Trot Controversial switch makes R to W and breaks temperature rise above set point. ELECTRICAL RATING (amperes): 148 DIA, ENGAGEMENT {Som inns) 120 Vac | 240 Vac | 24 Vac Full Load 8.0 5.1 2.0 Locked Rotor 48.0 30.8 = INDUCTIVE CURRENT: 0.25 A at 0.25 to 12 Vdc. 25517 TEMPERATURE SETTING RANGE: 80 F to 220 104 C]. DIFFERENTIAL: Mid scale, adjustable [2.8 C to 17.0C).
WHEN INSTALLING THIS PRODUCT... 1. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition, 2. Check the ratings given in the instructions and on the product to make sure the product is suitable for your application. 3. Installer must be a trained, experienced service technician. 4. After installation is complete, check out product operation as provided in these instructions. CAUTION 1.
SETTING Use the knob located beneath the control setting scale to turn scale to the desired set point, The scale setting fs the cut-out point; switch opens R to 8 and closes R to W. The cut