Specifications

ManualsBrandsHoneywell ManualsHeatingHome-Resideo SmartValve System Control - Natural Gas - Slow Opening - 1/2" In x 1/2" Out

SmartValve® System Controls

70-6910 121

Home

Controls Indoor Air Quality

Residential

Combustion Controls Hydronic Controls

Water

Controls Building Automation

Commercial

Components Pneumatic Controls

Industrial Combustion

Controls

SV9501; SV9502 SmartValve® System

The SmartValve System Controls provide easy field replacement of

a wide range of SV9500, SV9501, SV9502 and SV9602 SmartValve

System models. Gas appliance manufacturers use these models in

many types of gas fired heating appliances including central

furnaces, residential boilers, rooftop furnaces, commercial

cooking appliances, and unit heaters. These controls provide

intermittent pilot gas ignition sequencing, pilot flame sensing, and

both pilot and main gas control functions in a single control. They

are directly compatible with the Q3450 or Q3480 Intermittent Pilot

burners used with the original controls on the appliance.

• Suitable for a wide range of gas-fired appliances including residential

furnaces, roof-top furnaces, residential boilers, unit heaters, infrared

heaters, space heaters and commercial cooking units.

• Replaces SV9500, SV9501 and SV9502 controls as noted below.

• Ignition sequence includes timed trial for ignition.

Body Pattern: Straight-through

Maximum Capacity at 1 in. P.D. 150 ft

/hr (4.2 m

/hr)

Maximum Capacity: 200 ft

/hr (5.7 m

/hr)

Minimum Capacity: 20 ft

/hr (0.6 m

/hr)

Pilot Gas Outlet: Yes

Electrical Ratings: 24 Vac

Frequency: 60 Hz, 50 Hz

Flame Failure Response Time (sec): 1.6 sec @ 3 µA

Flame Sense: Electrode

Ignition Sequence: Intermittent Pilot

Ignition Source: Pilot

Ignition System Type: Intermittent Hot Surface Pilot Ignition

Ignition Trial Time: 90 sec

Ignition Trials To Lockout: continuous retry

Pressure Ratings: 1/2 psi (3.45 kPa)

Ambient Temperature Range: -40 F to +175 F (-40 C to +79 C)

Typical Ignition Hardware: Q3450

Approvals:

American Gas Association: IAS Design Certified: C2030017

Product Number

Type of

Gas

Opening

Characteristics

(standard, step) Inlet/Outlet Size (in.)

Pressure Regulator Setting

PrePurge(psi) (kPa)

SV9501M2528 Natural Standard Opening 1/2 in. NPT x 1/2 in. NPT 0.87 kPa 3.5 in. wc None

SV9501M8129 Natural Fast-Fast Opening 1/2 in. NPT x 1/2 in. NPT 0.87 kPa 3.4 in. wc None

SV9502H2522 Natural Slow Opening 1/2 in. NPT x 1/2 in. NPT 0.80 kPa 3.2 in. wc 15 seconds

Summary of content (7 pages)

PAGE 1
SmartValve® System Controls Residential Combustion Controls Ignition Source: Pilot Ignition System Type: Intermittent Hot Surface Pilot Ignition Ignition Trial Time: 90 sec Ignition Trials To Lockout: continuous retry Pressure Ratings: 1/2 psi (3.45 kPa) Ambient Temperature Range: -40 F to +175 F (-40 C to +79 C) Typical Ignition Hardware: Q3450 Body Pattern: Straight-through Maximum Capacity at 1 in. P.D. 150 ft3/hr (4.2 m3/hr) Maximum Capacity: 200 ft3/hr (5.7 m3/hr) Minimum Capacity: 20 ft3/hr (0.
PAGE 2
SmartValve® System Controls SV9510 SmartValve® System The SV9510 SmartValve System Controls combine gas flow control and electronic direct main burner ignition sequencing functions into a single unit. The ignition source is 120V hot surface igniter lighting the main burner flame.
PAGE 3
SmartValve® System Controls Approvals: Canadian Standards Association: CSA International: 15815810592145 Hydronic Controls Ignition System Type: Direct Hot Surface Ignition Ignition Trial Time: 7 sec Ignition Trials To Lockout: 4 trials Pressure Ratings: 1/2 psi (3.5 kPa) Pressure Tapping: 1/8 in. - NPT Ambient Temperature Range: 0 F to 175 F (-18 C to +79 C) Mounting: 0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically.
PAGE 4
SmartValve® System Controls SV9541 SmartValve® System The TRADELINE® SV9541 SmartValve System Controls combine gas flow control and electronic intermittent pilot sequencing functions into a single unit. The Q3450 or Q3480 Pilot hardware supplies the low voltage igniter, flame sensor and pilot burner. These ignition system controls provide all gas ignition safety Dimensions, Approximate: 3.2 in. wide x 4.9 in. high x 4.1 in.long (81 mm wide x 124 mm high x 104 mm long.
PAGE 5
SmartValve® System Controls SV9601M4571 Natural Standard Opening Inlet/Outlet Size (in.) 3/4 in. NPT x 3/4 in. NPT. Pressure Regulator Setting (psi) (kPa) Includes 0.87 kPa 3.5 in. wc Two 3/4 in. x 1/2 in. reducer bushings and an LP conversion kit.
PAGE 6
SmartValve® System Controls SV9602 SmartValve® System The SV9602 SmartValve System Controls combine gas flow control and electronic intermittent pilot sequencing functions into a single unit. This product family offers several different intermittent pilot sequences for a wide range of applications.
PAGE 7
SmartValve® System Controls Product Number SV9641M4510 Natural Standard Opening 3/4 in. NPT x 0.87 kPa 3/4 in. NPT. PostPurge Includes 3.5 in. wc 15 seconds 30 seconds Two 3/4 in. x 1/2 in. reducer bushings and an LP conversion kit. Water Controls • Pressure Regulator Opening Setting Type of Characteristics Inlet/Outlet (psi) (kPa) PrePurge Gas (standard, step) Size (in.