Fire Sentry SS2 Fire and Flame Detectors SS2 UV/IR Flame Detector Fire and Flame Detector firealarmresources.
Fire Sentry SS2 Detector Features • Multi-Spectrum senses energy in the UV, Vis and WideBand IR™ • False alarm immunity • Detects hydrocarbon and non-hydrocarbon fires • Microprocessor based algorithms: FirePic™ and Tri-Mode Plot™ • Wide field of view and solar blind • Wide temperature range of operation • Explosion-proof housing • FS2000™ System compatible or standalone operation • Compatible with approved fire alarm panels SS2-A & SS2-AN UV/IR Digital Fire and Flame Detector SS2-A & SS2-AN Multi-Spectr
Fire Sentry SS2 Detector The field of view for the Fire Sentry SS4 detectors is the widest in the industry with a 120° cone of vision. This means more hazard area can be covered by each detector. Greater sensitivity also increases the volume covered by each detector, up to four times more than some other detectors.
SPECIFICATIONS Response Time Maximum Sensitivity Distance 60Ft 40Ft 2-5 seconds to 1 sq. ft. of gasoline pan Fire at 60 ft. 30Ft 15Ft Field-of-View 120 degrees cone of vision (60 degrees from on axis). Spectral Sensitivity 60° 45° 30° 0° 15° 120 Degrees Field of View, Horizontal and Vertical Sensitivity to 1 sq. ft. Gasoline Pan Fire Ultraviolet: 185 to 260 nanometers Wide Band Infrared: 0.7 to 3.5 micrometers Visible: 400 to 700 nanometers Input Power 24 VDC nominal (20.
