Spec Sheet

FEATURES

TRANSFER SWITCHES

RTS Automatic Smart

Transfer Switch

600 - 800 Amps, 1-phase & 3-phase

600-800 amp

RTS transfer switches are compatible with the full 22-150kW line

of liquid-cooled generators. The switches are open transition and are available

in 120/240 1ø, 120/208 3ø, 120/240 3ø, and 277/480 3ø.

600-800 amp

RTS transfer switches are housed in a steel NEMA/UL Type 3R

enclosure, with electrostatically applied and baked powder paint. The heavy duty

Generac

Contactor is a UL recognized device, designed for years of service.

The controller at the generator handles all the timing, sensing and exercising

functions.

DPM Technology (single phase switches only)

Through the use of digital power

technology (DPM), each of these switches have the capability to manage up to 4

individual HVAC (24V controlled) loads with no additional hardware. When used in

tandem with Smart Management modules, up to 8 more loads can be managed

as well, providing the most installation efficient power management

options available.

*Built in the USA using domestic

and foreign parts

LISTED

PAGE 1
TRANSFER SWITCHES RTS Automatic Smart Transfer Switch 600 - 800 Amps, 1-phase & 3-phase C FEATURES ¡ 600-800 amp RTS transfer switches are compatible with the full 22-150kW line of liquid-cooled generators. The switches are open transition and are available in 120/240 1ø, 120/208 3ø, 120/240 3ø, and 277/480 3ø. ¡ 600-800 amp RTS transfer switches are housed in a steel NEMA/UL Type 3R enclosure, with electrostatically applied and baked powder paint.
PAGE 2
FUNCTIONS All Timing and sensing functions originate in the generator controller • Utility voltage drop-out <60% • Timer to generator start 5 second factory set, adjustable between 2-1500 seconds by a qualified dealer* • Engine warm up delay 5 seconds • Utility voltage pickup >90% • Re-transfer time delay 15 seconds • Engine cool-down timer 60 seconds** • Exerciser 12 minutes every 7 days The transfer switch can be operated manually without power applied.