Wi-Fi Color Touchscreen Programmable RTH9585 Wi-Fi Series Thermostat User Guide Read and save these instructions. For help please visit yourhome.honeywell.com In the box you will find • Thermostat • Thermostat ID Card • Wallplate • Wire labels • Screws and anchors • User Guide • Quick Start Guide Features of your Wi-Fi thermostat With your new thermostat, you can: • Connect to the Internet to monitor and control your heating/cooling system.
Welcome Congratulations on your purchase of a Honeywell Wi-Fi color touchscreen programmable thermostat. When registered to Honeywell’s Total Connect Comfort Solutions, you can remotely monitor and control the heating and cooling system in your home or business—you can stay connected to your comfort system wherever you go.
Table of contents About your new thermostat Setting holiday schedule–business..... 21 Setting holiday override–business....... 22 Initiating occupancy mode–business... 22 Customizing screen color.................... 23 Setting preferences............................. 23 Cleaning the thermostat screen.......... 24 Adjusting security settings................... 24 Software updates................................ 25 Unregistering your thermostat............. 25 Smart Response Technology..............
Quick reference: business use FAN. Select fan mode. MODE. Select system mode (heat, cool, auto, em heat). HOME. Touch to display Home screen. SETTINGS. Touch to display options. Start here to set a program schedule. Current time. Outdoor conditions. Outdoor temperature and humidity appear after registration. Thermostat location. Quickly identify which thermostat is in control of a specific area. Current status. Shows system mode (heat/ cool). Current setting.
Installing your thermostat You might need the following tools to install this thermostat: • • • • No. 2 Phillips screwdriver Pen Pencil Level (optional) • Drill and bits (3/16” for drywall, 7/32” for plaster) (optional) • Hammer (optional) • Electrical tape (optional) 1 Switch OFF power to your heating/cooling system. Important! To protect your equipment, switch OFF the power to your heating/cooling system at the breaker box or the system switch.
Installing your thermostat 3 Label the wires. Use the supplied sticky tags to label each wire as you disconnect it. Label wires according to the old thermostat terminal designations, not by wire color. Sticky tag Blank tags Note: If no tag matches a terminal designation, write the appropriate letter on a blank sticky tag. 4 Remove wallplate. Remove the old wallplate from the wall after all wires have been labeled and disconnected.
Installing your thermostat Important! This thermostat requires a C, or common, wire for power. The C, or common, wire brings 24 VAC power to the thermostat. If you are replacing an existing thermostat, it might not have a C wire connected to it. Many older mechanical or battery operated thermostats do not require a C wire. See the C Wire Addendum document included in this package for more information. If you don’t have a C wire, try: Note: Not all heating/cooling systems label the 24 VAC common C.
Installing your thermostat Wiring (Conventional System continued) Important! Check the box for each wire you connect. You will need this information in Step 9. c In the image on the right, check the box next to each connection. You will use this checklist in Step 9. W-O/B C K Rc d Verify wire is firmly secured by gently pulling on wire. e Repeat steps a–d for all other wires. f Push any excess wire back into the wall opening after all wires are installed. g Continue to page 8.
Installing your thermostat Wiring (Heat Pump System continued) Important! Check the box for each wire you connect. You will need this information in Step 9. c In the image on the right, check the box next to each connection. You will use this checklist in Step 9. W-O/B C K Rc d Verify wire is firmly secured by gently pulling on wire. e Repeat steps a–d for all other wires. Y G R Note: If old thermostat has separate wires on AUX and E, use a wire nut to attach both wires to a separate wire.
Installing your thermostat Alternate wiring (Heat Pump System) Use this if your wire labels don’t match the terminal labels. Note: You must have a C wire or equivalent. See page 5. C K 1 Rc 2 R O B C B X G Rc R G AUX R V W- 3 O/B Y4 Y VR X W X2 W1 W2 Y2 L 1 F W2- 5 Aux/E Y2 L 6 MCR36752 Alternate wiring key (Heat Pump System) 1 If you have both an R and Rc wire, unplug the jumper loop by pulling on the wire loop.
Installing your thermostat 8 Switch heating/cooling system ON. Important! 8a Verify that the C wire is connected at the thermostat and at the heating/cooling system. or 8b Make sure the heating/cooling system door is firmly secured. 8c Switch power back ON for your heating/cooling system at the breaker box or its power switch.
Installing your thermostat 9e Select your system type and touch Next. The system type determines other selections for completing initial setup. Use the checklist from Step 6A-d when making selections. 9f Touch Next after making selections on each screen. Next 9g Touch Done on the last screen. The thermostat displays an option to connect to your Wi-Fi network. Note: Touch the orange Help button on any screen for more information.
Connecting to your Wi-Fi network 2b Using the keyboard, touch the characters that spell out your home network password. 2c Touch Done. The thermostat displays “Connecting to your network. Please wait...” then shows a “Connection Successful” screen. Done 2d Touch OK to display the registration information screen. 2e Note your Thermostat MAC and Thermostat CRC. You need these numbers to complete online registration. OK To register your thermostat, follow the instructions beginning on page 13.
Disconnecting your Wi-Fi network 1 Touch SETTINGS. SETTINGS 2 Select Wi-Fi Setup. Wi-Fi Setup 3 Touch Disconnect from Network. The thermostat will display a question to confirm your selection. 4 Touch Yes to confirm that you want to disconnect from the network. The thermostat will display the Wi-Fi Setup screen. 5 Touch OK to display the menu. Disconnect from Network OK Reconnecting your Wi-Fi network 1 Touch SETTINGS. SETTINGS 2 Select Wi-Fi Setup. 3 Touch the name of the network you want to use.
Registering your thermostat online To view and set your Wi-Fi thermostat remotely, you must have a Total Connect Comfort account. Use the following steps. 1 Open the Total Connect Comfort web site. Go to mytotalconnectcomfort.com M31570 View the Wi-Fi Thermostat Registration video at wifithermostat.com/videos M31570 2 Login or create an account. If you have an account, click Login – or – click Create An Account 2a Follow the instructions on the screen.
Registering your thermostat online 3 Register your Wi-Fi thermostat. Thermostat ID Card After you are logged in to your Total Connect Comfort account, register your thermostat. Use the MAC ID and CRC ID to register this product at mytotalconnectcomfort.com Carte d’identification de thermostat HONEYWELL MODEL: RTH8580WF MAC ID: MAC CRC: enregistrer ce produit à mytotalconnectcomfort.com 3a Follow the instructions on the screen.
Setting the time/date 1 Touch the current time. The screen displays Set Time/Set Date. 12:12 am 2 Touch Set Time or Set Date. 3 Touch p or q until the proper time/date is displayed. 4 Touch Done to save or Cancel to ignore changes. Note: This thermostat will automatically update for daylight saving time (if observed in your area) and all date/time information is stored. If the thermostat is connected to Wi-Fi and registered to Total Connect Comfort, the current time is updated from the internet.
Setting system mode 1 Touch MODE to display system settings. MODE 2 Touch desired option: Heat: Thermostat controls only the heating system. Done Cool: Thermostat controls only the cooling system. Off: Heating/cooling systems are off. Automatic: Thermostat selects heating or cooling as needed depending on the indoor temperature. Emergency Heat (heat pumps with aux. heat): Controls auxiliary/emergency heat. Compressor is locked out. 3 Touch Done to save and exit.
Adjusting program schedules 1 Touch SETTINGS. SETTINGS 2 Select Create/Edit Schedule. • Touch View/Edit to view the full schedule and make a quick adjustment. Create / Edit Schedule • Touch Guide Me to create a schedule by answering simple questions. • Touch I’ll do it myself to manually create a program schedule. Note: To reduce costs, use the pre-set Energy Saver settings described on page 16.
Overriding schedules: home use 1 Touch p or q to adjust the temperature (right side of screen) and the Hold Until time. The schedule will resume when the Hold Until time expires. PERMANENT 2 Touch Permanent to keep the same temperature until you change it or resume the program schedule. 3 Touch Cancel Hold at any time to resume the program schedule. Overriding schedules: business use Touch p or q to adjust the temperature. It will be maintained until the hold time you set.
Viewing equipment status 1 Touch SETTINGS. SETTINGS 2 Select Equipment Status. 3 Touch p or q to view the status of all the equipment your thermostat is controlling.
Setting holiday/event schedules: business use This feature helps you conserve energy when the workplace is unoccupied for special events and holidays. SETTINGS Holiday / Event Scheduler 1 Touch SETTINGS. 2 Select Holiday/Event Scheduler. 3 Select the item you want to schedule. Custom events • Custom Events lets you set up other days for special schedules. • US and Canadian Holiday options let you select from a list of holidays commonly observed in each country.
Setting custom events: business use 6 Select Specific Date or Month/Weekday. • For Specific Date, you are prompted to select the start date, settings, end date, and frequency for the event. • For Month/Weekday, you are prompted to select the month, day of the week, week of the month, settings, length of event, and frequency of the event. Next 7 Review the settings and touch Done to save them. Touch Back, then Cancel to ignore the changes.
Setting holiday override: business use This feature lets you customize temperature settings to be maintained from now until a specified date. The thermostat resumes normal scheduling on the date you select. SETTINGS Holiday Mode 1 Touch SETTINGS. 2 Select Holiday Mode to display temperatures while you are away on holiday. 3 Touch p or q to select the Heat and Cool temperatures, then touch Next to select return date. 4 Review the settings and touch Done to save them.
Customizing screen color You can customize your thermostat display to match your décor. SETTINGS 1 Touch SETTINGS. Color Themes 2 Touch Color Themes. 3 Select the name of a color to use a predefined background, or select Custom to define you own background color and text. • If you select a color name, the screen shows an example on the left. Touch Done to accept that selection. Done • If you touch Custom, the screen gives you instructions.
Cleaning the thermostat screen When you select the Clean Screen option, the screen is locked so you don’t accidentally change settings while you clean. SETTINGS Clean Screen 1 Touch SETTINGS. 2 Select Clean Screen. A prompt asks if you want to clean the screen for 30 seconds. 3 Touch Yes. A countdown timer displays elapsed time until the screen is reactivated. Yes Note: Do NOT spray any liquid directly on the thermostat. Spray liquids onto a cloth, then use the damp cloth to clean the screen.
Software updates Honeywell periodically issues updates to the software for this thermostat. The updates occur automatically through your Wi-Fi connection. All your settings are saved, so you will not need to make any changes after the update occurs. Updates occur in the early morning. After your thermostat receives the software, it reboots, briefly displaying the Honeywell logo. The screen then shows “Updating software…” with a green progress bar.
Pre-occupancy purge This business use feature turns on the fan 1 to 3 hours before each “occupied” time period, to provide a comfortable work environment when you arrive. Compressor protection The thermostat keeps the compressor off for a few minutes before restarting, to prevent equipment damage. During this “off” time, the message “waiting for equipment” is displayed on screen. Auto changeover This feature is used in climates where both air conditioning and heating are used on the same day.
Setting advanced preferences You can change options for a number of system functions. Although many options, such as language and temperature indication settings are the same for all setups, others depend on the type of system you have. SETTINGS Preferences 1 Touch SETTINGS. The thermostat displays a list of options. 2 Select Preferences > Advanced Preferences. The thermostat displays the first screen of options that you can change.
Setting advanced preferences Advanced Preferences Options (concluded) Screen Title Settings and Options (Options vary depending on setup.) Early Recovery for Heating Select No to begin recovery on schedule or Yes to ramp up temperature early. Early Recovery for Cooling Select No to begin recovery on schedule or Yes to ramp down temperature early. Temperature Limits Select the Minimum Cool and Maximum Heat Limit. Keypad Lockout Select Unlocked/Partially Locked/Locked.
Changing system setup Note: Touch the orange Help button on any screen for more information. System Setup Options (SETTINGS > System Setup) Screen Title Settings and Options (Options vary depending on setup.) Language English/Français/Español. Thermostat installed in Home/Business (Thermostat is used in a residential (default) or commercial setting). Your thermostat location Touch THERMOSTAT button to display a screen where you can enter a custom name using a keypad.
Frequently asked questions QQ: Will my thermostat still work if I lose my Wi-Fi connection? AA: Yes, the thermostat will operate your heating and/or cooling system with or without Wi-Fi. QQ: How do I find the password to my router? AA: Contact the manufacturer of the router or check the router documentation. QQ: Why isn’t my thermostat connecting to my Wi-Fi router even though it is very close to the thermostat? AA: Verify that the password entered for the Wi-Fi router is correct.
Getting help and responding to alerts Your thermostat offers two types of assistance, if these assistance options do not answer your questions, review the FAQs (page 30) and troubleshooting tips (page 32). Help On screen help Most displays include an orange Help button. 1 Touch Help to display instructions for using the screen. 2 Touch OK to redisplay the original screen. OK On screen alerts Your home screen will display a large orange button when you need to correct a setting or system problem.
Troubleshooting If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank • • • • Cannot change system setting to Cool • Check that System Setup screen “Your thermostat controls” or “Your system type” is set to match your heating and cooling equipment (see page 29).
Glossary C wire The “C” or common wire brings 24 VAC power to the thermostat from the heating/cooling system. Some mechanical or battery operated thermostats may not have this wire connection. It is necessary for establishing a Wi-Fi connection to your home network. Heat Pump heating/cooling system Heat pumps are used to heat and cool a home. If your old thermostat has a setting for emergency heat, you likely have a heat pump.
1-year limited warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).
35 69-2715EF—07
33-00269EF-01 Home and Building Technologies In the U.S.: Honeywell 1985 Douglas Drive North Golden Valley, MN 55422-3992 wifithermostat.com ® U.S. Registered Trademark. Apple, iPhone, iPad, iPod touch and iTunes are trademarks of Apple Inc. All other trademarks are the property of their respective owners. © 2017 Honeywell International Inc. 33-00269EF—01 M.S. 03-17 Printed in U.S.A.
RTH9585 Thermostat programmable Wi-Fi à écran tactile couleur Série Wi-Fi Guide de l’utilisateur Veuillez lire le mode d’emploi et le conserver en lieu sûr. Pour obtenir de l’aide veuillez visiter yourhome.honeywell.
Bienvenue Nous vous félicitons de votre achat d’un thermostat programmable à écran tactile couleur Wi-Fi Honeywell. Après vous être enregistré auprès du service Total Connect Comfort d’Honeywell, vous pouvez surveiller et contrôler à distance le système de chauffage et de refroidissement de votre domicile ou de votre entreprise — vous pouvez rester connecté à votre service confort où que vous soyez.
Table des matières À propos du nouveau thermostat Réglage des événements personnalisés : commerciale........................... 20 Réglage du programme des jours fériés : commerciale............................... 21 Lancement du mode Occupé : commerciale.................................................... 22 Personnalisation de la couleur de l’écran....... 23 Préférences de réglage................................... 23 Nettoyage de l’écran du thermostat................ 24 Réglages de sécurité.............
Référence rapide : utilisation commerciale VENTILATEUR. Sélectionnez le mode du ventilateur. MODE. Sélectionnez le mode du système (chauffage, refroidissement, automatique,chauffage d’urgence). ACCUEIL. Touchez pour afficher l’écran Accueil. Heure actuelles. RÉGLAGES. Touchez pour afficher les options. Commencez ici pour configurer un programme. Conditions extérieures. La température et l’humidité extérieures s’affichent après l’enregistrement. Statut en cours.
Installation de votre thermostat Vous aurez besoin des outils suivants pour l’installation de ce thermostat : • • • • • Un tournevis cruciforme n° 2 Un stylo Un crayon Un niveau (optionnel) Une perceuse et des mèches (3/16 po pour une cloison sèche, 7/32 po pour du plâtre) (optionnels) • Un marteau (optionnel) • Du ruban électrique (optionnel) 1 Coupez l’alimentation sur votre système de chauffage/ refroidissement.
Installation de votre thermostat 3 Étiquetez les fils. Utilisez les étiquettes autocollantes fournies pour étiqueter chaque fil lorsque vous le déconnectez. Étiquetez les fils conformément aux désignations de bornes de l’ancien thermostat et non pas en fonction des couleurs des fils. Étiquette autocollante Étiquettes vierges Remarque : Si aucune étiquette ne correspond à une désignation de borne, notez la lettre appropriée sur une étiquette collante vierge. C 4 Retirez la plaque murale.
Installation de votre thermostat Important! Ce thermostat nécessite un câble C (neutre) pour l’alimentation. Le câble C, ou neutre, alimente le thermostat en 24 VCA. Si vous remplacez un thermostat existant, celui-ci pourrait ne pas être relié à un câble C. Plusieurs anciens thermostats mécaniques ou à piles ne nécessitent pas de câble C. Consultez le document Addenda du câble C inclus dans cet emballage pour obtenir plus d’information.
Installation de votre thermostat Important! Câblage (système conventionnel suite) c Cochez la case pour chaque fil que vous connecter. Vous aurez besoin de cette information à l’étape 9. Dans l’image à droite, cochez la case à côté de chaque connexion. Vous utiliserez cette liste de vérification à l’étape 9. W-O/B C K Rc d Vérifiez que le fil est bien attaché en tirant délicatement dessus. Y G R e Répétez les étapes a–d pour tous les autres fils.
Installation de votre thermostat Important! Câblage (système à thermopompe suite) c Dans l’image à droite, cochez la case à côté de chaque connexion. Vous utiliserez cette liste de vérification à l’étape 9. d Vérifiez que le fil est bien attaché en tirant délicatement dessus. e Répétez les étapes a–d pour tous les autres fils. Cochez la case pour chaque fil que vous connecter. Vous aurez besoin de cette information à l’étape 9.
Installation de votre thermostat Câblage alternatif (système à thermopompe) Utilisez ceci si vos étiquettes de fils ne correspondent pas aux références de bornes. Remarque : Vous devez avoir un fil C ou un fil équivalent. Consultez la page 5.
Installation de votre thermostat 8 Mettez le système de chauffage/ refroidissement en marche. Important! 8a Vérifiez que le fil C est branché sur le thermostat et sur le système de chauffage/ refroidissement. ou 8b Assurez-vous que la porte du système de chauffage/ refroidissement est bien fermée. Boîte des disjoncteurs 8c Rétablissez l’alimentation du système de chauffage/ refroidissement au niveau de la boîte des disjoncteurs ou de l’interrupteur d’alimentation.
Installation de votre thermostat 9e Sélectionnez votre type de système et touchez Suivant. Le type de système détermine d’autres sélections pour terminer la configuration initiale. Utilisez la liste de vérification de l’étape 6A-d pour faire les sélections. 9f Touchez Suivant après avoir effectué les sélections sur chaque écran. Suivant 9g Touchez Terminé sur le dernier écran. Le thermostat affiche l’option de connexion à votre réseau Wi-Fi.
Connexion à votre réseau Wi-Fi 2b En utilisant le clavier, touchez les caractères pour saisir le mot de passe de votre réseau résidentiel. 2c Touchez Terminé. Le thermostat affiche “Connexion au réseau en cours. Veuillez patienter...” puis affiche l’écran “Connexion réussie”. Terminé 2d Touchez OK pour afficher l’écran des informations d’enregistrement. 2e Notez les identifiants MAC et CRC du thermostat. Ces identifiants sont requis pour terminer l’enregistrement en ligne.
Déconnexion du réseau Wi-Fi 1 Touchez RÉGLAGES. RÉGLAGES 2 Sélectionnez Configuration Wi-Fi. Configuration Wi-Fi 3 Touchez Déconnecter du réseau. Ce thermostat affiche une question pour confirmer votre sélection. 4 Touchez Oui pour confirmer que vous souhaitez vous déconnecter du réseau. Le thermostat affiche l’écran de configuration Wi-Fi. 5 Touchez OK pour afficher le menu. Déconnecter du réseau Oui Reconnexion au réseau Wi-Fi 1 Touchez RÉGLAGES. RÉGLAGES 2 Sélectionnez Configuration Wi-Fi.
Enregistrement de votre thermostat en ligne Pour visualiser et régler votre thermostat Wi-Fi à distance, vous devez posséder un compte Total Connect Comfort. Voici comment procéder. 1 Ouvrez le site web Total Connect Comfort. Allez à mytotalconnectcomfort.com M31570 Visionnez la vidéo d’enregistrement du thermostat Wi-Fi à l’adresse wifithermostat.com/videos M31570 Enregistrement de votre thermostat en ligne 2 Ouvrez une session ou créez un compte.
Enregistrement de votre thermostat en ligne 3 Enregistrez votre thermostat Wi-F. Thermostat ID Card Lorsque vous avec accès à votre compte Total Connect Comfort, enregistrez votre thermostat. Use the MAC ID and CRC ID to register this product at mytotalconnectcomfort.com Carte d’identification de thermostat HONEYWELL MODEL: RTH8580WF MAC ID: MAC CRC: enregistrer ce produit à mytotalconnectcomfort.com 3a Suivez les instructions à l’écran.
Réglage de l’heure/la date 1 Touchez l’heure courante. L’écran affiche Régler l’heure/Régler la date. 6:30 pm 2 Touchez Régler l’heure ou Régler la date. 3 Touchez p ou q jusqu’à ce que l’heure/la date adéquates s’affichent. 4 Touchez Terminé pour enregistrer ou Annuler pour ignorer les changements. Remarque : Ce thermostat se mettra à jour automatiquement à l’heure d’été/ d’hiver (si respecté dans votre zone) et l’information de la date/heure est enregistrée.
Réglage du mode du système 1 Touchez MODE pour afficher les réglages du système. 2 Touchez l’option désirée : MODE Terminé Chauffage : Le thermostat commande uniquement le système de chauffage. Refroidissement : Le thermostat commande uniquement le système de refroidissement. Arrêt : Les systèmes de chauffage et de refroidissement sont arrêtés. Automatique : Le thermostat sélectionne le chauffage ou le refroidissement selon le besoin en fonction de la température ambiante.
Réglage des horaires de programmation 1 Touchez RÉGLAGES. RÉGLAGES 2 Sélectionnez Créer/Modifier l’horaire. • Touchez Afficher/Modifier pour voir le programme complet et faire un réglage rapide. Créer / Modif ier I horaire • Touchez Aidez-moi pour créer un programme en répondant à de simples questions. • Touchez Je le ferai moi-même pour créer un programme manuellement. Remarque : Pour réduire les coûts, utilisez les réglages préconfigurés de l’économiseur d’énergie décrits à la page 16.
Dérogation aux programmes : utilisation résidentielle 1 Touchez p ou q pour régler la température (côté droit de l’écran) et la durée Maintien jusqu’à. Le programme reprend lorsque la durée Maintien jusqu’à a expiré. PERMANENT 2 Sélectionnez Permanent pour maintenir la même température jusqu’à la prochaine modification ou jusqu’à la reprise du programme configuré. 3 Touchez Annuler maintien à tout moment pour réactiver le programme configuré.
Affichage du statut de l’équipement 1 Touchez RÉGLAGES. RÉGLAGES 2 Sélectionnez État du matriel. 3 Touchez p ou q pour afficher le statut de tout l’équipement contrôlé par le thermostat.
Réglage des programmes vacances/jours fériés : utilisation commerciale Cette fonction permet de conserver de l’énergie lorsque personne ne se trouve sur le lieu de travail durant les jours fériés et les événements spéciaux. 1 Touchez RÉGLAGES. 2 Sélectionnez Gestionnaire des jours fériés/ événements. 3 Sélectionnez l’article à programmer.
Réglage des événements personnalisés : utilisation commerciale 6 Sélectionnez Date spécifique ou Mois/ Jour de la semaine. • Pour Date spécifique, vous êtes invité à sélectionner la date de début, les réglages, la date de fin et la fréquence de l’événement. • Pour Mois/Jour de la semaine, vous êtes invité à sélectionner le mois, le jour de la semaine, la semaine du mois, les réglages, la durée de l’événement et la fréquence de l’événement.
Réglage du programme des jours fériés : utilisation commerciale Cette fonction vous permet de personnaliser les réglages de température à maintenir à partir de maintenant jusqu’à une date spécifiée. Le thermostat reprend le programme normal à la date sélectionnée. 1 Touchez RÉGLAGES. 2 Sélectionnez Mode Jours fériés pour afficher les températures lors de votre absence durant les jours fériés.
Personnalisation de la couleur de l’écran Vous pouvez personnaliser l’affichage de votre thermostat pour l’assortir à votre décor. 1 Touchez RÉGLAGES. RÉGLAGES Thémes de couleurs 2 Touchez Thèmes de couleurs. 3 Sélectionnez le nom d’une couleur à utiliser comme arrière-plan prédéfini, ou sélectionnez Personnaliser pour définir votre propre couleur d’arrière-plan et de police. • En choisissant un nom de couleur, l’écran affiche un échantillon sur la gauche. Touchez Terminé pour accepter celle sélection.
Nettoyage de l’écran du thermostat Lorsque vous sélectionnez l’option de nettoyage de l’écran, l’écran se verrouille pour que les réglages ne soient pas modifiés accidentellement durant le nettoyage. RÉGLAGES Ne oyer I écran 1 Touchez RÉGLAGES. 2 Sélectionnez Nettoyer l’écran. Une invite vous demande si vous souhaitez nettoyer l’écran pendant 30 secondes. Oui 3 Touchez Oui. Une minuterie montre le temps écoulé jusqu’à ce que l’écran soit réactivé.
Mises à jour logicielles Honeywell publie régulièrement des mises à jour pour le logiciel de ce thermostat. Ces mises à jour se font automatiquement par l’intermédiaire de votre connexion Wi-Fi. Tous vos réglages sont enregistrés, de sorte que vous n’avez à effectuer aucune modification après la mise à jour. Les mises à jour ont lieu tôt le matin. Une fois votre thermostat mis à jour, il est relancé et affiche brièvement le logo Honeywell. L’écran affiche “Mise à jour logicielle...
Balayage avant occupation Cette fonction pour utilisation commerciale active le ventilateur de 1 heure à 3 heures avant chaque période occupée pour fournir un environnement de travail confortable à l’arrivée. Protection du compresseur Le thermostat maintient le compresseur arrêté pendant quelques minutes avant un redémarrage, pour éviter d’endommager l’équipement. Pendant cette durée d’arrêt, le message “En attente du matériel” s’affiche à l’écran.
Réglage des préférences avancées Vous pouvez modifier des options pour plusieurs fonctions du système. Bien que de nombreuses options, telles que la langue et les réglages d’indication de température, soient les mêmes pour toutes les configurations, d’autres dépendent du type de système utilisé. 1 Touchez RÉGLAGES. Le thermostat affiche une liste d’options. 2 Sélectionnez Préférences > Préférences avancées. Le thermostat affiche le premier écran d’options que vous pouvez modifier.
Réglage des préférences avancées Options de préférences avancées (fin) Titre de l’écran Réglages et options (Les options varient en fonction de la configuration.) Durée de la dérogation Sélectionnez la durée de maintien de la température durant une dérogation : 1-10 heures ou pas de limite. Récupération précoce pour le chauffage Sélectionnez Non pour lancer la récupération à l’heure programmée ou Oui pour lancer une rampe de température ascendante précoce.
Modification de la configuration du système Remarque : Touchez le bouton Aide orange sur n’importe quel écran pour obtenir plus d’informations. Options de configuration du système (RÉGLAGES > Configuration du système) Titre de l’écran Réglages et options (Les options varient en fonction de la configuration.) Langue English/Français/Español. Thermostat installé dans Résidentielle/Commerciale (le thermostat est utilisé pour une application résidentielle (défaut) ou commerciale).
Foire aux questions QQ: Mon thermostat fonctionnera-t-il toujours si je perds ma connexion Wi-Fi? RR: Oui, le thermostat actionnera votre système de chauffage et/ou de refroidissement avec ou sans Wi-Fi. QQ: Comment puis-je trouver le mot de passe de mon routeur? RR: Contactez le fabriquant du routeur ou vérifiez la documentation du routeur.
Obtenir de l’aide et répondre aux alertes Votre thermostat offre deux types d’assistance. Si ces options d’assistance ne répondent pas à vos questions, consultez la foire aux questions (page 30) et les conseils de dépannage (page 32). Aide Aide sur écran La plupart des écrans comprennent un bouton Aide orange. 1 Touchez Aide pour afficher les instructions d’utilisation de l’écran. 2 Touchez OK pour afficher de nouveau l’écran d’origine.
Dépannage En cas de difficultés avec le thermostat, essayez les suggestions suivantes. La plupart des problèmes peuvent être réglés rapidement et facilement. Rien n’apparaît à l’écran • Vérifiez le disjoncteur et réinitialisez-le si nécessaire. • Assurez-vous que l’interrupteur de marche-arrêt du système de chauffage et de refroidissement est sur marche. • Assurez-vous que la porte de l’appareil de chauffage est bien fermée. • Vérifiez que le fil C est connecté (voir page 5).
Glossaire Fil C Le fil “C”, ou neutre, amène l’alimentation 24 V c.a. au thermostat à partir du système de chauffage/refroidissement. Certains thermostats mécaniques ou à pile peuvent ne pas être dotés de ce fil. Il est nécessaire à l’établissement d’une connexion Wi-Fi à votre réseau domestique. Système de chauffage/refroidissement à thermopompe Des thermopompes sont utilisées pour chauffer et refroidir une résidence.
Garantie limitée d’un an Honeywell garantit ce produit, à l’exception des piles, contre tout défaut de pièce ou de main-d’œuvre, durant une période d’un (1) an à partir de la date d’achat par le consommateur si le produit est utilisé et entretenu convenablement. En cas de défaillance ou de mauvais fonctionnement pendant la période de garantie, Honeywell remplacera ou réparera le produit, à sa discrétion.
35 69-2715EF—07
33-00269EF-01 Home and Building Technologies Aux États-Unis: Honeywell 1985 Douglas Drive North Golden Valley, MN 55422-3992 wifithermostat.com ® Marque de commerce déposée américaine. Apple, iPhone, iPad, iPod touch et iTunes sont des marques de commerce de Apple Inc. Toutes les autres marques de commerce sont propriété de leurs propriétaires respectifs. © 2017 Honeywell International Inc. 33-00269EF—01 M.S.