User Guide Wi-Fi Touchscreen Programmable Thermostat RTH8500 Wi-Fi Series
In the box you will find • Thermostat • Wallplate (attached to thermostat) • Screws and anchors • Coin cell battery (inside the back of the thermostat) • Quick Start Guide • Thermostat ID Card • Wire labels • User Guide 69-2715EF—07 ii
Welcome Congratulations on your purchase of a Honeywell Wi-Fi touchscreen programmable thermostat. When registered to Honeywell’s Total Connect Comfort Solutions, you can remotely monitor and control the heating and cooling system in your home or business—you can stay connected to your comfort system wherever you go.
This thermostat works with common 24 volt systems such as forced air, hydronic, heat pump, oil, gas, and electric. It will not work with millivolt systems, such as a gas fireplace, or with 120/240 volt systems such as baseboard electric heat. This thermostat contains a Lithium battery which may contain Perchlorate material. Perchlorate Material—special handling may apply. See www.dtsc.ca.
Table of contents About your new thermostat Home screen quick reference...................... 5 Preset energy-saving schedules.................. 6 Installation Installing your thermostat............................. 8 Connecting to your Wi-Fi network.............. 26 Registering your thermostat online............ 31 Operation Setting the clock......................................... 36 Setting the fan............................................ 37 Selecting system mode..............................
Features of your Wi-Fi thermostat With your new thermostat, you can: • Connect to the Internet to monitor and control your heating/cooling system • View and change your heating/cooling system settings • View and set temperature and schedules • Receive alerts via email and get automatic upgrades Your new thermostat provides: • Smart Response Technology • Compressor protection • Heat/cool auto changeover 69-2715EF—07 4
Home screen quick reference Once your Wi-Fi thermostat is installed, it will display the home screen. Portions of this display will change depending on how you are viewing it. To change settings, simply press the appropriate area lightly with your finger.
Preset energy-saving schedules This thermostat is pre-set with energy-saving program settings for four time periods. Using the default settings can reduce your heating/cooling expenses if used as directed. Savings may vary depending on geographic region and usage. WAKE 6:00 am LEAVE 8:00 am RETURN 6:00 pm SLEEP 10:00 pm Default Heat Settings Default Cool Settings 70 ° 78 ° 62 ° 85 ° 70 ° 78 ° 62 ° 82 ° To change the settings, see pages 39–42.
Setting up your thermostat Setting up your Wi-Fi programmable touchscreen thermostat is easy. It is preprogrammed and ready to go as soon as it is installed and registered. 1 Install your thermostat. 2 Connect it to your home wireless network. 3 Register online for remote access. Before you begin, you may want to watch a brief installation video. Use the QR Code at the front of this guide, or go to wifithermostat.
Installing your thermostat You might need the following tools to install this thermostat: • • • • o. 2 Phillips screwdriver N Small pocket screwdriver Pencil Level (optional) • D rill and bits (3/16” for drywall, 7/32” for plaster) (optional) • Hammer (optional) • Electrical tape (optional) 1 Switch OFF power to your heating/cooling system. or Important! To protect your equipment, switch OFF the power to your heating/ cooling system at the breaker box or the system switch.
Installing your thermostat 2 Remove old thermostat faceplate and leave wires connected. 2a Take a picture of the wire connections for later reference. 2b If no wire is connected to a terminal labeled C or no C terminal exists on the old thermostat, view the Alternate Wiring videos at wifithermostat.com/videos Important! C wire is required and is the primary power source for your thermostat. Without a C wire, your thermostat will not power up.
Installing your thermostat 3 Label wires. Do not label by wire color. Use the supplied sticky tags to label each wire as you disconnect it. Label wires according to the old thermostat terminal designations, not by wire color. Sticky tag Blank tags Note: If no tag matches a terminal designation, write the appropriate letter on a blank sticky tag. 4 Remove wallplate. Remove the old wallplate from the wall after all wires have been labeled and disconnected.
Installing your thermostat 5 Separate Wi-Fi thermostat and its wallplate. On your new thermostat, grasp the finger holds on the top and bottom of the wallplate with one hand and the thermostat (front) with the other hand. Pull pieces apart.
Installing your thermostat 6 Mount wallplate for Wi-Fi thermostat. Mount your new wallplate using screws and anchors included with the thermostat. Wallplate If necessary: Drill 3/16-in holes for drywall. Drill 7/32-in holes for plaster. Note: You may be able to use your existing wall anchors. Hold the wallplate up to the existing anchors to check for alignment.
Installing your thermostat Important! The Wi-Fi thermostat requires a C wire to operate. The C, or common, wire brings 24 VAC power to the thermostat. Many older mechanical or battery operated thermostats do not require a C wire. If you don’t have a C wire, try: • L ooking for an unused wire that is pushed into the wall. Connect that wire to C and check that it is connected to the 24 VAC common at your heating/cooling system. Check the video section at wifithermostat.
Installing your thermostat Wiring (conventional system) Remove metal jumper only if you have both R and RC wires C G Y W R 7A Wire the Wi-Fi thermostat to your conventional system. a Starting with the C Wire, match the sticky tag on the wire to the terminal labels. HEAT PUMP CONVENTIONAL You must have a C wire. See page 13. b Loosen screw, insert wire on inside edge of RC RC Y2 R R L terminal, then tighten screw. O/B W W2 E/AUX c Verify wire is firmly secured by gently pulling Y Y K K on wire.
Installing your thermostat Wiring (heat pump system only) Labels don’t match? See alternate wiring key on pages 18–19. O MCR33529 C G Y AUX R 7B Wire Wi-Fi thermostat to your heat pump. a Starting with the C Wire, match the sticky tag on the wire to the terminal labels. You must have a C wire. See page 13. HEAT PUMP b Loosen screw, insert wire on inside edge of terminal, then tighten screw. c Verify wire is firmly secured by gently pulling RC R L on wire.
Installing your thermostat Alternate wiring (conventional system) Use this if your wire labels don’t match the terminal labels. CONVENTIONAL Note: You must have a C wire or equivalent. See page 13. Metal Jumper Y2 W2 3 Y2 W2 K RC RC 1 R R 2 W W Y Y G G C C See key to 1 – 3 on page 17.
Installing your thermostat Alternate wiring key (conventional system) 1 Remove metal jumper connecting R and RC only if you must connect both R and RC. 2 If your old thermostat had both R and RH wires, remove metal jumper. Connect the R wire to the RC terminal, and the RH wire to the R terminal. 3 Do not use K terminal. For future use.
Installing your thermostat Alternate wiring (heat pump system only) Use this if your wire labels don’t match the terminal labels. HEAT PUMP Metal Jumper Note: You must have a C wire or equivalent. See page 13. Y2 5 6 7 RC 1 R L E/AUX RC O AUX K R 2 O/B 3 Y Y G 4 G C C 3 MCR33530A 69-2715EF—07 18 See key to 1 – 7 on page 19.
Installing your thermostat Alternate wiring key (heat pump system only) 1 Leave metal jumper between R and RC terminals in place. 2 If your old thermostat had both V and VR wires, check wifithermostat.com for help. 3 If your old thermostat had separate O and B wires, attach the B wire to the C terminal. If another wire is attached to the C terminal, check wifithermostat.com for help. Attach the O wire to the O/B terminal. Set System Function 0190 to 0 (see page 55).
Installing your thermostat 8 Install battery. Insert the coin cell battery (included), observing the correct polarity. Note: A correctly inserted battery will extend about halfway out of the battery slot on the thermostat, allowing for easier removal. This battery maintains time and date during power outages. It does not power the thermostat (C wire required).
Installing your thermostat Wallplate 9 Attach thermostat to wallplate. Align the thermostat to the wallplate and then snap into place.
Installing your thermostat 10 Switch heating/cooling system ON. Important! 10a Verify that the C wire is connected at the thermostat and at the heating/cooling system. or 10b Make sure the heating/ cooling system door is firmly secured. 10c Switch power back ON for your heating/cooling system at the breaker box or its power switch.
Installing your thermostat 11 Set date and time. Touch s or t buttons to change displayed time and date. Day Year Press and hold a button to quickly change a setting. Note:This thermostat will automatically update for daylight saving time (if observed in your area) and all date/time information is stored. If the thermostat is connected to Wi-Fi and registered to Total Connect Comfort, the current time is updated from the internet.
Installing your thermostat 12 Determine your heating/cooling system type. Important! Heating/cooling system type must be set so that your thermostat operates properly and does not damage your system. 12a If you have a traditional system (natural gas forced air with A/C), your hermostat is set up by default to control this system.
Installing your thermostat Congratulations! Your thermostat is operational. 13 Test your thermostat. 13b For remote access to your thermostat, continue to “Connecting to your Wi-Fi network” on page 26. Inside MORE MCR31580 13a Press the SYSTEM button to change to heating or cooling and begin operation. Heating/cooling system not turning on? Refer to page 67 or FAQ at wifithermostat.
Connecting to your Wi-Fi network To complete this process, you must have a wireless device connected to your home wireless network. Any of these device types will work: • Tablet (recommended) • Laptop (recommended) • Smartphone If you get stuck... at any point in this procedure, restart the thermostat by removing the thermostat from the wallplate, wait for 5 seconds, and snap it back onto the wallplate. Return to Step 1 in this procedure, which starts on page 27.
Connecting to your Wi-Fi network 1 Connect to your thermostat. 1a Make sure the thermostat message center displays Wi-Fi SETUP. 1b On the wireless device (laptop, tablet, smartphone), view the list of available Wi-Fi networks Inside MORE Note: If you are asked to specify a home, public, or office network, select Home Network. 27 M31566 1c Connect to the network called NewThermostat_123456 (the number will vary).
Connecting to your Wi-Fi network 2 Join your home network. 2a Open your web browser to access the Thermostat Wi-Fi Setup page. The browser should automatically direct you to the correct page; if it does not, go to http://192.168.1.1 2b Find the name of your home network on this page and select it. 2c Complete the instructions for joining your Wi-Fi network and click on the Connect button. (Depending on your network setup, you may see an instruction such as Enter Password for your home network.
Connecting to your Wi-Fi network Note: If your Wi-Fi network does not appear in the list on the Thermostat Wi-Fi Setup page: • Try performing a network rescan by pressing the Rescan button. This is helpful in areas with a lot of networks. • If you are connecting to a hidden network, then enter the network SSID in the textbox, select the encryption type from the drop down menu, and click on the Add button. This manually adds the network to the top of the list.
Connecting to your Wi-Fi network 3 Make sure your thermostat is connected. Look at the thermostat display. Verify that the message center displays one of the following: CONNECTION SUCCESSFUL JOINED: [WI-FI NETWORK NAME] YOU ARE ALMOST DONE REGISTER AT TOTAL CONNECT Inside MORE If you see one of these messages, continue on page 31. Note: If you see CONNECTION FAILURE or Wi-Fi SETUP in the message center, confirm you correctly entered your home network password in step 2c.
Registering your thermostat online To view and set your Wi-Fi thermostat remotely, you must have a Total Connect Comfort account. Use the following steps. 1 Open the Total Connect Comfort web site. Go to mytotalconnectcomfort.com M31570 View the Wi-Fi Thermostat Registration video at wifithermostat.
Registering your thermostat online 2 Login or create an account. If you have an account, click Login click Create An Account 2a Follow the instructions on the screen. 2b Check your email for an activation message from My Total Connect Comfort. This may take several minutes. Note: If you do not receive a response, check your junk mailbox or use an alternate e-mail address. 2c Follow activation instructions in the email. 2d Log in.
Registering your thermostat online 3 Register your Wi-Fi thermostat. After you are logged in to your Total Connect Comfort account, register your thermostat. 3a Follow the instructions on the screen. After adding your thermostat location, you must enter the thermostat’s unique identifiers: • MAC ID • MAC CRC Note: These IDs are listed on the Thermostat ID Card included in the thermostat package. The IDs are not case sensitive.
Registering your thermostat online 3b When the thermostat is successfully registered, the Total Connect Comfort registration screen will display a SUCCESS message.
Registering your thermostat online Your thermostat will display wireless signal strength. You can now control your thermostat from anywhere through your laptop, tablet, or smartphone. Total Connect Comfort free app is available for Apple iPhone , iPad and iPod touch devices at iTunes or at Google Play for all Android™ devices.
Setting the clock 1 Press CLOCK to display setting arrows. 2 Press s or t to adjust the time. (You can advance the time more quickly by holding the s or t buttons.) MORE Note: This thermostat will automatically update for daylight saving time (if observed in your area) and all date/time information is stored. If the thermostat is connected to Wi-Fi and registered to Total Connect Comfort, the current time is updated from the internet.
Setting the fan 1 Press FAN to select fan operation. 3 Press DONE to save setting. Your selection appears under FAN. ON: Fan is always on. AUTO: Fan runs only when the heating or cooling system is on. 37 Inside MORE MCR31553 2 Press FAN again to select ON or AUTO (toggle to re-select). The selected option blinks.
Selecting system mode 1 Press SYSTEM to display options. 2 Press SYSTEM again to select an option. You may need to press two or three times to make a selection—the selected option blinks. Inside Possible system modes: HEAT: Controls only the heating system. COOL: Controls only the cooling system. OFF: Heating/cooling systems are off. AUTO: Selects heating or cooling depending on the indoor temperature. EM HEAT (heat pumps with aux. heat): Controls auxiliary/emergency heat. Compressor is locked out.
Adjusting program schedules 1 Press SCHED, then EDIT. Screen displays day buttons at top. 2 Press day buttons (MON–SUN) to select days. MORE SLEEP 3 Press s or t to set Wake time for selected day(s). 4 Press s or t to set Heat and Cool temperature for this time period. 5 Press another period (LEAVE, RETURN, SLEEP) and set time and temperatures for each. Note: You can press CANCEL PERIOD to eliminate any unwanted time period.
Overriding schedules temporarily 1 On the home screen, press s or t to immediately adjust the temperature. The new setting will be maintained until the time shown under Hold Until. When the timer expires, the schedule will resume, and the temperature will return to the setting for the current time period. To cancel the temporary setting at any time, press CANCEL (or SCHED). The program schedule will resume.
Overriding schedules permanently 2 Whatever temperature you set will be maintained 24 hours a day until you manually change it or press CANCEL (or SCHED) to cancel “Hold” and resume the program schedule. Inside Permanent Hold MORE 41 MCR31557 1 Press HOLD to permanently adjust the temperature. This will turn off the program schedule.
Setting vacation hold Use this function to suspend the program schedule while you are away for an extended period. Inside 1 Press s or t to set the temperature. 2 Press s or t to set the time of day you want the schedule to resume on the day you return. Hold Until MORE 3 Press HOLD twice. Hold Until appears. 4 Press s or t to select the number of days. Note: You can press CANCEL (or SCHED) to resume normal schedule.
Setting filter reminder intervals If activated during installation, the filter reminder alerts you with a message above the time when it is time to replace your filter. Press RESET after changing the filter, to restart the timer. Inside RESET CHANGE FILTER To change the reminder interval: MORE 1 Press MORE, then EDIT. SLEEP 2 Press s or t to select the desired interval (in days), then press DONE. DAYS 3 Press RESET. Note: System setting function 0500 governs the filter interval.
Cleaning the screen 1 Press SCREEN to lock the screen for cleaning. The screen will remain locked for 30 seconds so you can clean the screen without changing any settings. MORE 2 After 30 seconds, press DONE to resume normal operation, or press SCREEN again if you require more time for cleaning. MCR31560 Note: Do not spray any liquid directly on the thermostat. Spray liquid onto a cloth, then use the damp cloth to clean the screen. Use water or household glass cleaner. Avoid abrasive cleansers.
Unregistering thermostat After that, it will alternate displaying REGISTER AT TOTAL CONNECT, the MAC ID and the MAC CRC. 45 Inside MORE M31572 If you remove the thermostat from your Total Connect Comfort website account (for example, you’re moving and leaving the thermostat behind), the message center will scroll UNREGISTERED FROM TOTAL CONNECT for 3 minutes.
Disconnecting Wi-Fi Replacing your router The Message Center will display Wi-Fi DISCONNECTED for 1 minute. After that it will display Wi-Fi SETUP. Inside MORE M31573 If you disconnect the thermostat from your Wi-Fi network: 1 Enter system setup (see page 51). 2 Change setting 900 to 0 (see page 58). Re-connect to a Wi-Fi network by following the steps on page 26.
Software updates While the update is taking place, your thermostat screen goes blank and the message center shows UPDATING and the percentage of the update that has occurred. When the update is complete, your home screen will appear as usual. M34184 Honeywell periodically issues updates to the software for this thermostat. The updates occur automatically through your Wi-Fi connection. All your settings are saved, so you will not need to make any changes after the update occurs.
Smart Response Technology This feature allows the thermostat to “learn” how long the heating/cooling system takes to reach programmed temperature settings, so the temperature is reached at the time you set. For example: Set the Wake time to 6:00 am, and the temperature to 70°. The heat will come on before 6:00 am, so the temperature is 70° by 6:00 am. Note: System setting function 0530 controls Smart Response Technology. See “Smart Response Technology” on page 57.
Compressor protection This feature forces the compressor to wait a few minutes before restarting, to prevent equipment damage. During the wait time, the message “Wait” is displayed on screen.
Auto changeover This feature is used in climates where both air conditioning and heating are used on the same day. When the system is set to AUTO, the thermostat automatically selects heating or cooling depending on the indoor temperature. Heat and cool settings must be at least 3 degrees apart. The thermostat will automatically adjust settings to maintain this 3-degree separation. Note: System setting function 0300 controls Auto changeover. See “Manual/Auto Changeover” on page 56.
Setting functions and options You can change options for a number of system functions. Available functions depend on the type of system you have. The functions, designated with four-digit numbers, along with available options are described on pages 52–58. This thermostat is pre-set for a single-stage heating/cooling system. Setting function 0170 for a heat pump will adjust the default settings. HEAT 5 When you have made all changes, press DONE to save and exit.
System setup How do I set my thermostat name? (See page 51 for instructions.) Function 0112 Settings & Options 52 = Thermostat Device Name 1 Basement This name will 2 Bathroom identify the thermostat when you 3 Bathroom 1 4 Bathroom 2 view it remotely. 5 Bathroom 3 If you register 6 Bedroom multiple thermostats, 7 Bedroom 1 give each one a 8 Bedroom 2 different name.
System setup How do I change time and date settings? (See page 51 for instructions.) Function Settings & Options 0120 Year Setting (first two digits) 20 = Year 20xx 21 = Year 21xx 0130 Year Setting (last two digits) 01–99 (i.e., 2001–2099) 0140 Month Setting 01–12 (i.e., January–December) 0150 Date Setting 01–31 0160 Schedule Options 4 0 Program schedule is on (7-day programmable). Program schedule is off. Thermostat can not be programmed.
System setup How do I set my heating/cooling system type? (See page 51 for instructions.) Function 0170 Select System Type If you are not sure of your heating/cooling system type or have other questions, go to wifithermostat.com Settings & Options 1 Heat/cool: Gas, oil or electric heating with central air conditioning. 2 Heat pump: Heat pump without backup or auxiliary heat. 4 Heat only with fan: Gas, oil or electric heat without central air conditioning.
System setup How do I customize my heating/cooling system? (See page 51 for instructions.) Function Settings & Options Note: Depending on system settings, functions on this page might not appear. Heating Fan Control 0 Heat Pump Changeover Valve (for heat pumps only) 0 0240 Heating Cycle Rate 0250 Heating Cycle Rate Stage 2 5 9 3 0180 0190 1 1 1 Gas or oil heat: Use this setting if you have a gas or oil heating system (system controls fan operation).
System setup What other functions can I change? (See page 51 for instructions.) Function Settings & Options 0280 Backlight 0 1 Backlight off, then on for approximately 8 seconds after keypress. Backlight always on low intensity, full bright after keypress. 0300 Manual/Auto Changeover See page 50 for more information. 0 1 Manual changeover (Heat/Cool/Off). Automatic changeover (Heat/Cool/Auto/Off). Automatically turns on Heat or Cool based on room temperature.
System setup What other functions can I change? (See page 51 for instructions.) Function Settings & Options 0500 Filter Change Reminder The reminder appears after selected number of days run time not actual time.
System setup How do I change my Wi-Fi settings? (See page 51 for instructions.) Function Settings & Options 0710 Restore Original Settings 0 1 0890 Wi-Fi On/Off 1 0 Wi-Fi is on and can be connected to a Wi-Fi network. Wi-Fi is off. Thermostat cannot be connected to a Wi-Fi network. If you are not connecting the thermostat to a Wi-Fi network this will remove the text “Wi-Fi Setup” from the messaging center. 0900 Wi-Fi Connection 1 Connected to Wi-Fi network.
Frequently asked questions QQ: Will my thermostat still work if I lose my Wi-Fi connection? AA: Yes, the thermostat will operate your heating and/or cooling system with or without Wi-Fi. QQ: How do I find the password to my router? AA: Contact the manufacturer of the router or check the router documentation. QQ: Why am I not seeing my Wi-Fi setup page? AA: You are probably connected only to your router, not to your thermostat. Try connecting to the thermostat again.
Frequently asked questions QQ: Where can I find my MAC ID and MAC CRC codes? AA: The MAC ID and MAC CRC will show in the message center of the thermostat. The numbers are also included on a card packed with the thermostat or on the back of the thermostat (visible when removed from wallplate). Each thermostat has a unique MAC ID and MAC CRC. QQ: My thermostat is unable to register to the Total Connect Comfort website. AA: Verify that the thermostat is correctly enrolled on your homeWi-Fi network.
Frequently asked questions QQ: I registered on the Total Connect Comfort website but was unable to login using my new account. AA: Check your email and ensure that you received an activation email. Follow the instructions to activate your account and then login to the website. QQ: I have signed up on Total Connect Comfort website and have not received a confirmation email. AA: Check for the email in your Junk or Deleted folder.
Message center messages The Message Center at the top of the screen communicates Wi-Fi connection and registration status. It also displays the MAC ID and MAC CRC for registering the thermostat at mytotalconnectcomfort.com Displayed before you begin Wi-Fi setup. Displayed while connecting to the Wi-Fi network. Displayed after connecting to the Wi-Fi network. [Wi-Fi network name] Displayed when connected to the Wi-Fi network. Displayed when Wi-Fi connection is complete.
Message center messages Displayed when the thermostat is registered at mytotalconnectcomfort.com Displayed when the thermostat is removed from your Total Connect Comfort account. Wi-Fi signal strength. Displayed when the thermostat is connected to the Wi-Fi network and registered at mytotalconnectcomfort.com Displayed if there is no Wi-Fi signal. • Check another device to be sure Wi-Fi is working in your home; if not, call your Internet Service Provider. • Move the router.
Message center messages Displayed if the home Wi-Fi password is entered incorrectly. • Re-enter password for your home Wi-Fi network. • Repeat setup process and confirm your password for your home Wi-Fi network. Displayed if no IP Address is supplied by the router. • Wait for 30 minutes, connection can take several minutes. If still no connection, remove thermostat from wallplate, wait 5 seconds, and snap it back onto the wallplate.
Troubleshooting If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank • Check circuit breaker and reset if necessary. • Make sure power switch at heating and cooling system is on. • Make sure furnace door is closed securely. • Make sure C wire is connected (see page 13).
Troubleshooting Heat pump issues cool air in heat mode, or warm air in cool mode • Check Function 0190: Heat Pump Changeover Valve to make sure it is properly configured for your system (see page 55). Button on lower right of screen is blank • This button will remain blank unless the furnace filter change reminder is activated (see page 43). Red light is on • If thermostat is in Emergency Heat mode the red light is normal. It shows that the thermostat is in emergency heat mode.
Troubleshooting Heating or cooling system does not respond • Press SYSTEM to set system to Heat. Make sure the temperature is set higher than the Inside temperature. • Press SYSTEM to set system to Cool. Make sure the temperature is set lower than the Inside temperature. • Check circuit breaker and reset if necessary. • Make sure power switch at heating & cooling system is on. • Make sure furnace door is closed securely. • If “Wait” is displayed, the compressor protection timer is on.
Glossary C wire The “C” or common wire brings 24 VAC power to the thermostat from the heating/cooling system. Some older mechanical or battery operated thermostats may not have this wire connection. It is necessary for establishing a Wi-Fi connection to your home network. Heat Pump heating/cooling system Heat pumps are used to heat and cool a home. If your old thermostat has a setting for auxiliary or emergency heat, you likely have a heat pump.
Regulatory information FCC Compliance Statement (Part 15.19) (USA only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation. FCC Warning (Part 15.
Regulatory information Thermostats To comply with FCC and Industry Canada RF exposure limits for general population/ uncontrolled exposure, the antenna(s) used for these transmitters must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Section 7.1.
1-year limited warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).
Automation and Control Systems Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 Honeywell Ltd 705 Montrichard Avenue Saint-Jean-sur-Richelieu, Québec J2X 5K8 wifithermostat.com ® U.S. Registered Trademark. Apple, iPhone, iPad, iPod touch and iTunes are trademarks of Apple Inc. All other trademarks are the property of their respective owners. © 2013 Honeywell International Inc. 69-2715EF—07 M.S. Rev. 11-13 Printed in U.S.A.
Guide de l’utilisateur Thermostat programmable à écran tactile Wi-Fi Série RTH8500WF Wi-Fi
Vous trouverez dans la boîte • Thermostat • Plaque murale (fixée au thermostat) • Vis et ancres • Pile bouton (à l’intérieur de l’arrière du thermostat) • Guide de démarrage rapide • Carte d’identification de thermostat • Étiquettes de fils • Guide de l’utilisateur 69-2715EF—07 ii
Bienvenue Nous vous félicitons de l’achat d’un thermostat programmable à écran tactile Wi-Fi Honeywell. Après vous être enregistré auprès du service Total Connect Comfort de Honeywell, vous pouvez surveiller et contrôler à distance le système de chauffage et de refroidissement de votre domicile ou de votre entreprise — vous pouvez rester connecté à votre service confort où que vous soyez.
Ce thermostat fonctionne sur les systèmes de 24 V commun tels que les systèmes à air pulsé, eau chaude, thermopompe, mazout, gaz et électriques. Il ne fonctionne pas avec les systèmes à mV, tels que les cheminées à gaz, ou avec les systèmes de 120/240 V tels que les chauffages de plinthe. Ce thermostat contient une pile au lithium pouvant contenir du perchlorate. Perchlorate — peut exiger une manipulation particulière. Consultez le site www.dtsc.ca.
Table des matières À propos du nouveau thermostat Référence rapide de l’écran d’accueil.......... 5 Programmes d’économie d’énergie préconfigurés............................. 6 Installation Installation de votre thermostat.................... 8 Connexion à votre réseau Wi-Fi................ 26 Enregistrement de votre thermostat en ligne ................................. 31 Fonctionnement Réglage de l’horloge.................................. 36 Réglage du ventilateur ..............................
Caractéristiques de votre thermostat Wi-Fi Avec votre nouveau thermostat, vous pouvez : • Vous connecter à Internet pour surveiller et contrôler votre système de chauffage/refroidissement • Consulter et modifier vos réglages du système de chauffage/refroidissement • Consulter et régler la température et les programmes • Recevoir des alertes par courrier électronique et obtenir des mises à jour automatiques Votre nouveau thermostat procure : • La technologie Smart Response • Une protection du compresse
Référence rapide de l’écran d’accueil Une fois votre thermostat Wi-Fi installé, il affichera l’écran d’accueil. Des parties de cet écran seront modifiées en fonction de la manière dont vous le consultez. Pour modifier des réglages, appuyez simplement légèrement sur la zone appropriée avec le doigt.
Programmes d’économie d’énergie préconfigurés Ce thermostat contient des programmes d’économie d’énergie préconfigurés pour quatre périodes. L’utilisation des réglages par défaut peut vous permettre de réduire vos dépenses de chauffage/refroidissement si vous suivez les instructions indiquées. Les économies peuvent varier en fonction de la région géographique et de l’usage.
Configuration de votre thermostat La configuration de votre thermostat programmable à écran tactile Wi-Fi est aisée. Il est préprogrammé et prêt à fonctionner dès qu’il est installé et enregistré. 1 Installez votre thermostat. 2 Connectez-le au réseau sans fil de votre domicile. 3 Enregistrez-vous en ligne pour bénéficier de l’accès à distance. Avant de commencer, vous désirerez peut-être visionner une courte vidéo d’installation.
Installation de votre thermostat Vous aurez besoin des outils suivants pour l’installation de ce thermostat : • • • • • un tournevis Phillips n° 2 un petit tournevis de poche un crayon un niveau (optionnel) une perceuse et des mèches (3/16 po pour une cloison sèche, 7/32 po pour du plâtre) (optionnel) • un marteau (optionnel) • un ruban électrique (optionnel) ou 1 Coupez l’alimentation sur votre système de chauffage/refroidissement.
Installation de votre thermostat 2 Retirez la plaque de l’ancien thermostat et laissez les fils connectés. 2a Prenez une photo des connexions de câblage pour vous y référer plus tard. 2b Si aucun fil n’est connecté à la borne C ou si aucune borne C n’est présente sur l’ancien thermostat, visionnez les vidéos expliquant les autres câblages à wifithermostat.com/videos Important! Le fil C est requis et représente la source d’alimentation principale du thermostat.
Installation de votre thermostat 3 Étiquetez les fils. N’appliquez pas les étiquettes en fonction des couleurs des fils. Utilisez les étiquettes autocollantes fournies pour étiqueter chaque fil lorsque vous le déconnectez. Étiquetez les fils conformément aux désignations de bornes de l’ancien thermostat et non pas en fonction des couleurs des fils.
Installation de votre thermostat 5 Séparez le thermostat Wi-Fi de sa plaque murale. Sur votre nouveau thermostat, saisissez les alvéoles du haut et du bas de la plaque murale d’une main et tenez le thermostat (avant) dans l’autre main. Séparez les deux pièces.
Installation de votre thermostat 6 Montez la plaque murale du thermostat Wi-Fi. Montez votre nouvelle plaque murale à l’aide des vis et ancres fournies avec le thermostat. Plaque murale Au besoin : Percez des trous de 3/16 po (4,8 mm) pour les cloisons sèches. HEAT PUMP CONVENTIONAL Y2 RC L E/AUX W2 W O/B K K Y Y G G C C R Percez des trous de 7/32 po (5,6 mm) pour le plâtre. Remarque : Vous pourrez peut-être utiliser les ancres murales déjà installées.
Installation de votre thermostat Important! le fonctionnement du thermostat Wi-Fi requiert l’utilisation d’un fil neutre (C). Le fil C, ou neutre, amène l’alimentation 24 V ca au thermostat. De nombreux thermostats mécaniques ou à piles plus anciens n’ont pas besoin d’un fil C. Si vous ne disposez pas d’un fil C, essayez : • de rechercher un fil inutilisé enfoncé dans le mur. Connectez ce fil au fil C et vérifiez s’il est connecté au fil C 24 V ca de votre système de chauffage/refroidissement.
Installation de votre thermostat Câblage (système conventionnel) C G Y W R Retirez le cavalier métallique si les fils R 7A Branchez le thermostat Wi-Fi sur votre système et RC sont tous deux conventionnel. a En commençant par le fil C, faites correspondre l’étiquette présents. autocollante sur le fil à l’étiquette de la borne. HEAT PUMP Vous devez disposer d’un fil neutre (C). CONVENTIONAL Voir page 13.
Installation de votre thermostat Câblage (système à thermopompe uniquement) Les étiquettes ne correspondent pas? Reportez-vous au code de câblage alternatif des pages 18–19. O 15 69-2715EF—07 MCR33529 C G Y AUX R 7B Branchez le thermostat Wi-Fi à votre thermopompe. a En commençant par le fil C, faites correspondre l’étiquette autocollante sur le fil à l’étiquette de la borne. Vous devez disposer d’un fil neutre (C). Voir page 13.
Installation de votre thermostat Câblage alternatif (système conventionnel) Utilisez ceci si vos étiquettes de fils ne correspondent pas aux références de bornes. CONVENTIONNEL Remarque : vous devez disposer d’un fil C (neutre) ou équivalent. Voir page 13. Cavalier métallique Y2 W2 3 Y2 W2 K RC ou RC 1 R 2 ou R ou ou W ou W ou Y ou Y G G ou ou C ou ou ou C MFCR33528 Reportez-vous aux points 1 à 3 de la page 17.
Installation de votre thermostat Câblage alternatif (système conventionnel) 1 Retirez le cavalier métallique reliant R et RC uniquement si vous devez connecter à la fois R et RC. 2 Si votre ancien thermostat est pourvu de deux fils R et RH, retirez le cavalier métallique. Connectez le fil R à la borne RC et le fil RH à la borne R. 3 N’utilisez pas la borne K. Pour une utilisation ultérieure.
Installation de votre thermostat Câblage alternatif (système à thermopompe uniquement) Utilisez ceci si vos étiquettes de fils ne correspondent pas aux références de bornes. THERMOPOMPE Remarque : vous devez disposer d’un fil C (neutre) ou équivalent. Voir page 13. 5 6 7 Cavalier métallique RC ou L E/AUX K ou ou O ou ou ou AUX ou ou ou RC 1 R ou ou R O/B 3 Y ou ou 2 Y ou G 4 G C ou ou C 3 MFCR33530A 69-2715EF—07 18 Reportez-vous aux points 1 à 7 de la page 19.
Installation de votre thermostat Code de câblage alternatif (système à thermopompe uniquement) 1 Laissez le cavalier métallique reliant les bornes R et RC en place. 2 Si votre ancien thermostat est pourvu de deux fils V et VR, consultez le site wifithermostat.com pour obtenir de l’aide. 3 Si votre ancien thermostat est pourvu de fils O et B séparés, fixez le fil B à la borne C. Si un autre fil est relié à la borne C, consultez le site wifithermostat.com pour obtenir de l’aide.
Installation de votre thermostat 8 Installez la pile. Insérez la pile bouton (incluse), en respectant la polarité correcte. Remarque : Une pile bien insérée dépasse de moitié de la fente de la batterie sur le thermostat, permettant un retrait facile. Cette pile permet de conserver l’heure et la date durant les coupures d’électricité. Elle n’alimente pas le thermostat (fil C requis).
Installation de votre thermostat 9 Fixez le thermostat à la plaque murale. Plaque murale Alignez le thermostat sur la plaque murale puis emboîtez-le.
Installation de votre thermostat 10 Mettez le système de chauffage/ refroidissement en marche. Important! 10a Vérifiez que le fil C est branché sur le thermostat et le système de chauffage/refroidissement. ou 10b Assurez-vous que la porte du système de chauffage/ refroidissement est bien fermée. 10c Rétablissez l’alimentation dusystème de chauffage/ refroidissement au niveau du disjoncteur ou de l’interrupteur d’alimentation.
Installation de votre thermostat 11 Réglez la date et l’heure. Touchez les boutons s ou t pour modifier l’heure et la date affichées. Jour Année Appuyez sur un bouton et maintenez-le pour modifier rapidement un réglage. Remarque : Ce thermostat se mettra à jour automatiquement à l’heure d’été/d’hiver (si respecté dans votre zone) et l’information de la date/heure est enregistrée.
Installation de votre thermostat 12 Déterminez le type de votre système de chauffage/refroidissement. Important! Le type de système de chauffage/refroidissement doit être réglé de sorte que le thermostat fonctionne correctement et n’endommage pas le système. 12a Si vous avez un système traditionnel (gaz naturel air pulsé avec climatisation), votre thermostat est réglé par défaut pour réguler ce système.
Installation de votre thermostat Félicitations! Votre thermostat est maintenant prêt à fonctionner. 13a Appuyez sur le bouton SYSTEM pour passer au chauffage ou au refroidissement et mettre l’appareil en marche. 13b Pour accéder à distance à votre thermostat, passez à « Connexion à votre réseau Wi-Fi » à la page“Connexion à votre réseau Wi-Fi” on page 26. 25 Inside MORE MCR31580 13 Testez votre thermostat.
Connexion à votre réseau Wi-Fi Pour exécuter cette étape, vous devez avoir un appareil sans fil connecté à votre réseau sans fil. Tous ces types d’appareils sont valables : • Tablette (recommandé) • Ordinateur portatif (recommandé) • Téléphone intelligent Si vous êtes bloqué... à tout moment dans cette procédure, redémarrez le thermostat en le retirant de la plaque murale, attendez 5 secondes, et emboîtez-le à nouveau sur la plaque murale.
Connexion à votre réseau Wi-Fi 1 Connectez votre thermostat. 1a Assurez-vous que le centre des messages du thermostat affiche Wi-Fi SETUP (Configuration Wi-Fi). 1c Connectez-vous au réseau appelé NewThermostat_123456 (le chiffre variera).
2 Joignez votre réseau domestique. 2a Ouvrez votre navigateur Web pour accéder à la page de configuration Wi-Fi du thermostat. Le navigateur devrait automatiquement vous diriger vers la page correcte; s’il ne le fait pas, entrez l’adresse http://192.168.1.1 2b Trouvez le nom de votre réseau domestique sur cette page et sélectionnez-le. Remarque : Certains routeurs ont des caractéristiques améliorées tels que les réseaux invités; utilisez votre réseau domestique.
Connexion à votre réseau Wi-Fi Remarque : Si votre réseau Wi-Fi n’apparaît pas dans la liste de la page de configuration Wi-Fi du thermostat : • Essayez de scanner le réseau à nouveau en appuyant sur le bouton Rescan (nouveau balayage). Ceci est utile dans les endroits avec plusieurs réseaux. • Si vous êtes connecté à un réseau invisible, entrez alors le SSID du réseau dans la boîte de dialogue, sélectionnez le type d’encryptage à partir du menu déroulant, et cliquez sur le bouton Add (ajouter).
Connexion à votre réseau Wi-Fi 3 Vérifiez si votre thermostat est connecté. Inside Regardez l’écran du thermostat. Vérifiez que le centre des messages affiche l’un des messages suivants : CONNECTION SUCCESSFUL (Connexion réussie) JOINED: (Vous avez rejoint :) [NOM DU RÉSEAU WI-FI] YOU ARE ALMOST DONE (Vous avez presque terminé) REGISTER AT TOTAL CONNECT (Inscrivez-vous à Total Connect) Si vous voyez l’un de ces messages, passez à page 31.
Enregistrement de votre thermostat en ligne Pour visualiser et régler votre thermostat Wi-Fi à distance, vous devez posséder un compte Total Connect Comfort. Voici comment procéder. 1 Ouvrez le site web Total Connect Comfort. Allez sur le site www.mytotalconnectcomfort.com M31570 Visionnez la vidéo d’enregistrement du thermostat Wi-Fi à wifithermostat.
2 Ouvrez une session ou créez un compte. Si vous possédez un compte, cliquez sur Login (Ouvrir une session) – ou – cliquez sur Create An Account (créer un compte) 2a Suivez les instructions à l’écran. 2b Consultez votre messagerie et recherchez le message d’activation provenant de My Total Connect Comfort. Ceci peut prendre plusieurs minutes. Remarque : Si vous ne recevez aucune réponse, consultez votre boîte de pourriels ou utilisez une autre adresse électronique.
Enregistrement de votre thermostat en ligne 3 Enregistrez votre thermostat Wi-Fi. Lorsque vous avez accès à votre compte Total Connect Comfort, enregistrez votre thermostat. 3a Suivez les instructions à l’écran. Après avoir ajouté l’emplacement de votre thermostat, vous devez entrer les identifiants uniques de votre thermostat : • MAC ID • MAC CRC Thermostat ID Card Use the MAC ID and CRC ID to register this product at mytotalconnectcomfort.
Enregistrement de votre thermostat en ligne 3b Lorsque le thermostat est convenablement enregistré, l’écran d’enregistrement Total Connect Comfort affiche le message SUCCESS (réussi). Dans la fenêtre de messages du thermostat apparaît : CONGRATULATIONS! SET UP COMPLETE. (Félicitations! Configuration terminée.
Enregistrement de votre thermostat en ligne 3c Veuillez aussi noter que le thermostat affiche maintenant la puissance de son signal. Félicitations! Vous avez terminé. Vous pouvez maintenant contrôler votre thermostat de n’importe quel endroit au moyen de votre ordinateur portatif, de votre tablette ou de votre téléphone intelligent. Des applications gratuites sont disponibles pour les appareils iPhone , iPad et iPod touch d’Apple sur iTunes ou sur Google Play pour tous les appareils Android.
Réglage de l’horloge MORE Remarque : Ce thermostat se mettra à jour automatiquement à l’heure d’été/d’hiver (si respecté dans votre zone) et l’information de la date/heure est enregistrée. Si le thermostat est connecté au Wi-Fi et est enregistré au Total Connect Comfort, l’heure courante est mise à jour à partir de l’Internet. Remarque : pour modifier le format du jour actuel, voir « Options de programme » à la page 53.
Réglage du ventilateur 1 Appuyez sur FAN (ventilateur) pour sélectionner le fonctionnement du ventilateur. 3 Appuyez sur DONE (terminé) pour enregistrer le réglage. Votre sélection apparaît sous FAN. ON : le ventilateur est toujours en fonction. AUTO : le ventilateur fonctionne uniquement lorsque le système de chauffage ou de refroidissement est en fonction. 37 Inside MORE MCR31553 2 Appuyez à nouveau FAN pour sélectionner ON (en fonction) ou AUTO (basculez pour resélectionner).
Sélection du mode de fonctionnement du système HEAT (chauffage) : commande uniquement le système de chauffage. COOL (refroidissement) : commande uniquement le système de refroidissement. OFF (arrêt) : les systèmes de chauffage et de refroidissement sont arrêtés. AUTO : sélectionne le chauffage ou le refroidissement en fonction de la température intérieure. EM HEAT (thermopompes avec chauffage auxiliaire) : commande le chauffage auxiliaire/d’urgence. Le compresseur est verrouillé.
Réglage des programmes 1 Appuyez sur SCHED (programme) puis sur EDIT (modifier). Les boutons des jours s’affichent sur le haut de l’écran. 2 Appuyez sur les boutons (MON–SUN (lundi-dimanche)) pour sélectionner les jours. MORE SLEEP 3 Appuyez sur s ou t pour régler l’heure de réveil pour le(s) jour(s) sélectionné(s). 4 Appuyez sur s ou t pour régler la température de chauffage et de refroidissement pour cette période de temps.
Dérogation temporaire de la programmation 1 Sur l’écran d’accueil, appuyez sur s ou t pour ajuster immédiatement la température. Le nouveau réglage sera maintenu jusqu’à l’heure affichée sous Hold Until (maintenir jusqu’à). Lorsque le délai se termine, la programmation est rétablie et la température revient au réglage correspondant à la période actuelle. Pour annuler ce réglage temporaire à tout moment, appuyez sur CANCEL (annuler) (ou SCHED (programme)).
Dérogation permanente de la programmation 2 La température sélectionnée sera maintenue 24 heures sur 24 jusqu’à la modification manuelle suivante ou une pression du bouton CANCEL (annuler) (ou SCHED (programme)) afin d’annuler le maintien et de revenir à l’horaire de programmation. 41 Inside Permanent Hold MORE MCR31557 1 Appuyez sur HOLD (maintien) pour régler la température de façon permanente. Ceci désactive l’horaire de programmation.
Réglage du maintien pendant les vacances Utilisez cette fonction pour suspendre un horaire de programmation lorsque vous vous absentez pendant une période prolongée. 1 Appuyez sur s ou t pour régler la température. Inside Hold Until 2 Appuyez sur s ou t pour régler l’heure à laquelle vous désirez que la programmation reprenne le jour de votre retour. MORE 3 Appuyez deux fois sur HOLD (maintien). Hold Until (maintenir jusqu’à) s’affiche.
Réglage des intervalles de rappel de filtre S’il a été activé au cours de l’installation, le rappel de filtre affiche un message au-dessus de l’heure lorsqu’il est temps de remplacer le filtre. Pour modifier l’intervalle de rappel : RESET CHANGE FILTER MORE 1 Appuyez sur MORE (plus) puis sur EDIT (modifier). 2 Appuyez sur s ou t pour sélectionner l’intervalle désiré (en jours), puis appuyez sur DONE (terminé). 3 Appuyez sur RESET. 4 Appuyez sur DONE pour enregistrer et quitter.
Nettoyage de l’écran 1 Appuyez sur SCREEN (écran) pour verrouiller l’écran en vue du nettoyage. L’écran restera verrouillé 30 secondes pour que vous puissiez le nettoyer sans modifier des réglages. MORE Remarque : Ne pulvérisez aucun liquide directement sur le thermostat. Pulvérisez les liquides sur un chiffon, puis utilisez le chiffon humide pour nettoyer l’écran. N’utilisez pas d’eau ni de nettoyant à vitres ménager. Évitez les produits de nettoyage abrasifs.
Annulation de l’enregistrement du thermostat Après ceci, il affichera alternativement REGISTER AT TOTAL CONNECT (enregistrer sur Total Connect) et les codes MAC ID et MAC CRC. 45 Inside MORE M31572 Si vous retirez le thermostat de votre compte Total Connect Comfort (par exemple, si vous déménagez et laissez le thermostat en place), la fenêtre de messages fera défiler le message UNREGISTERED FROM TOTAL CONNECT (enregistrement sur Total Connect annulé) pendant 3 minutes.
Déconnexion Wi-Fi Remplacement du routeur La fenêtre de messages affichera Wi-Fi DISCONNECTED (Wi-Fi déconnecté) pendant 1 minute. Il affichera ensuite Wi-Fi SETUP (configuration Wi-Fi). Reconnectez-vous à un réseau Wi-Fi en suivant les étapes de la page 26. Inside MORE Désactivation de la Wi-Fi Si vous ne prévoyez pas contrôler le thermostat à distance, vous pouvez supprimer le message Wi-Fi SETUP (Configuration Wi-Fi) de l’écran : 1 Entrez dans la configuration du système (voir page 51).
Mises à jour du logiciel Pendant que la mise à jour a lieu, l’écran de votre thermostat devient vierge et le centre des messages affiche UPDATING (mise à jour) et le pourcentage de la mise à jour effectuée. Lorsque la mise à jour est terminée, votre écran d’accueil reprend son apparence habituelle. M34184 Honeywell introduit régulièrement des mises à jour du logiciel pour ce thermostat. Les mises à jour s’effectuent automatiquement par votre connexion Wi-Fi.
Technologie Smart Response Celle-ci permet au thermostat « d’apprendre » combien de temps il faut à votre système de chauffage/refroidissement pour atteindre le réglage de température programmé, afin que la température voulue soit obtenue à l’heure programmée. Par exemple : réglez l’heure de réveil à 6 heures et la température à 70°. Le chauffage est mis en fonction avant 6 heures de manière à ce que la température soit de 70° à 6 heures.
Protection du compresseur Cette fonction force le compresseur à attendre quelques minutes avant un redémarrage, pour éviter d’endommager l’équipement. Pendant la durée d’attente, le message « Wait » (attendre) s’affiche à l’écran.
Commutation automatique Celle-ci est utilisée dans les climats où le conditionnement d’air et le chauffage sont utilisés le même jour. Lorsque le système est réglé sur AUTO, le thermostat sélectionne automatiquement le chauffage ou le refroidissement en fonction de la température intérieure. L’écart entre les réglages de chauffage et de refroidissement doit être d’au moins 3 degrés. Le thermostat ajuste automatiquement les réglages afin de maintenir ces 3 degrés d’écart.
Fonctions et options de configuration Vous pouvez modifier des options pour plusieurs fonctions du système. Les fonctions disponibles dépendent de votre type de système. Les fonctions, désignées sous forme d’un nombre à quatre chiffres, ainsi que les options disponibles sont décrites aux pages 52–58. Ce thermostat est préréglé pour un système de chauffage/refroidissement à étage unique. La fonction de configuration 0170 pour une thermopompe ajustera les réglages par défaut. 1 Appuyez sur SYSTEM (système).
Configuration du système Comment définir le nom de mon thermostat? (Voir la page 51 pour les instructions.) Fonction 0112 Device Name (Nom de l’appareil) Ce nom identifiera le thermostat lorsque vous le consultez à distance. Si vous enregistrez plusieurs thermostats, attribuez un nom différent à chacun d’entre eux.
Configuration du système Comment modifier l’heure et la date? (Voir la page 51 pour les instructions.) Fonction Réglages et Options 0120 Réglage de l’année 20 = Année 20xx 21 = Année 21xx (deux premiers chiffres) 0130 Réglage de l’année 01–99 (2001–2099) (deux derniers chiffres) 0140 Réglage du mois 01–12 (janvier–décembre) 0150 Réglage de la date 01–31 0160 Options de programmation 4 0 Horaire de programmation activé (programmable sur 7 jours). Horaire de programmation désactivé.
Configuration du système Comment définir mon type de système de chauffage/refroidissement? (Voir la page 51 pour les instructions.) Fonction Réglages et Options 0165 0 Restaurer la programmation par 1 défaut 0170 Sélection du type de système Si vous n’êtes pas certain de votre type de système de chauffage/ refroidissement ou que vous avez d’autres questions, consultez le site wifithermostat.com Continuer à utiliser l’horaire programmé.
Configuration du système Comment personnaliser mon système de chauffage/refroidissement? (Voir la page 51 pour les instructions.) Fonction Réglages et Options Remarque : en fonction des réglages du système, des fonctions de cette page peuvent ne pas apparaître.
Configuration du système Quelles autres fonctions puis-je modifier? (Voir la page 51 pour les instructions.) Fonction 0280 Rétroéclairage Réglages et Options 0 1 Rétroéclairage éteint, puis allumé pendant environ 8 secondes après pression d’une touche. Rétroéclairage toujours allumé à basse intensité, luminosité maximum après pression d’une touche. 0300 0 Commutation manuelle/automa- 1 tique Voir la page 50 pour de plus amples informations.
Configuration du système Quelles autres fonctions puis-je modifier? (Voir la page 51 pour les instructions.
Configuration du système Comment modifier mes paramètres Wi-Fi? (Voir la page 51 pour les instructions.) Fonction Réglages et Options 0710 0 Restauration des réglages originaux 1 0890 Wi-Fi En marche/Arrêt 1 0 Le Wi-Fi est en marche et le thermostat peut être connecté à un réseau Wi-Fi Le Wi-Fi est en marche. Le thermostat ne peut pas être connecté à un réseau Wi-Fi.
Questions fréquemment posées QQ : Mon thermostat fonctionnera-t-il toujours si je perds ma connexion Wi-Fi? RR : Oui, le thermostat actionnera votre système de chauffage et/ou de refroidissement avec ou sans Wi-Fi. QQ : Comment puis-je trouver le mot de passe de mon routeur? RR : Contactez le fabricant du routeur. QQ : Pourquoi ne vois-je pas ma page de configuration Wi-Fi? RR : Vous êtes probablement uniquement connecté à votre routeur, et non pas à votre thermostat.
Questions fréquemment posées QQ : Où puis-je trouver mes codes MAC ID et MAC CRC? RR : Les codes MAC ID et MAC CRC seront affichés dans la fenêtre de messages du thermostat. Les numéros figurent également sur une carte jointe au thermostat ou sur l’arrière du thermostat (visibles lorsque celui-ci est retiré de la plaque murale). Chaque thermostat est doté de codes MAC ID et MAC CRC uniques. QQ : Il est impossible d’enregistrer mon thermostat sur le site Total Connect Comfort.
Questions fréquemment posées QQ : Je suis enregistré sur le site Total Connect Comfort mais je n’ai pas pu ouvrir de session en utilisant mon nouveau compte. RR : Consultez votre messagerie et vérifiez si vous avez reçu le message d’activation. Suivez les instructions d’activation de votre compte, puis ouvrez une session sur le site web. QQ : Je me suis enregistré sur le site Total Connect Comfort et n’ai pas reçu de message de confirmation.
Messages de la fenêtre de messages La fenêtre de messages du sommet de l’écran indique la connexion Wi-Fi et le statut d’enregistrement. Il affiche également les codes MAC ID et MAC CRC pour l’enregistrement du thermostat sur le site mytotalconnectcomfort.com Affiché avant le début de la configuration Wi-Fi. Affiché lors de la connexion au réseau Wi-Fi. Affiché après la connexion au réseau Wi-Fi. [nom du réseau Wi-Fi] Affiché lorsque vous êtes connecté au réseau Wi-Fi.
Messages de la fenêtre de messages Affiché lorsque le thermostat est enregistré sur le site mytotalconnectcomfort.com Affiché lorsque le thermostat est retiré de votre compte Total Connect Comfort. Force du signal Wi-Fi. Affiché lorsque le thermostat est connecté au réseau Wi-Fi et enregistré sur le site mytotalconnectcomfort.com Affiché en cas d’absence de signal Wi-Fi.
Messages de la fenêtre de messages Affiché si le mot de passe Wi-Fi du réseau domestique n’a pas été entré correctement. • Saisissez de nouveau le mot de passe du réseau Wi-Fi de votre maison. • Répétez le processus de configuration et confirmez le mot de passe du réseau Wi-Fi de votre maison. Affiché si aucune adresse IP n’a été fournie par le routeur. • Patientez pendant 30 minutes, la connexion peut prendre plusieurs minutes.
Dépannage En cas de difficultés avec le thermostat, essayer les suggestions suivantes. La plupart des problèmes peuvent être réglés rapidement et facilement. Rien n’apparaît à l’écran • Vérifiez le disjoncteur et réinitialisez-le si nécessaire. • Assurez-vous que l’interrupteur de marche-arrêt du système de chauffage et de refroidissement est sur marche. • Assurez-vous que la porte de l’appareil de chauffage est bien fermée. • Vérifiez si le fil C est connecté (voir page 13).
Dépannage « Wait » (attendre) s’affiche à l’écran. • La fonction de protection du compresseur est activée. Attendez 5 minutes que le système se remette en marche en toute sécurité sans endommager le compresseur. La thermopompe émet de l’air frais en mode chauffage, ou de l’air chaud en mode refroidissement • Vérifiez la fonction 0190 : Vanne de commutation de thermopompe pour vous assurer qu’elle soit configurée en fonction de votre équipement de chauffage (voir page 55).
Dépannage Le système de chauffage ou de refroidissement ne répond pas • Appuyez sur SYSTEM (système) pour régler le système sur Heat (chauffage). Vérifiez si le réglage de température est supérieur à la température intérieure. • Appuyez sur SYSTEM pour régler le système sur Cool (refroidissement). Vérifiez si le réglage de température est inférieur à la température intérieure. • Vérifiez le disjoncteur et réinitialisez-le si nécessaire.
Glossaire Fil C Le fil « C », ou neutre, amène l’alimentation 24 V ca au thermostat à partir du système de chauffage/ refroidissement. Certains anciens thermostats mécaniques ou à pile peuvent ne pas être dotés de ce fil. Il est nécessaire à l’établissement d’une connexion Wi-Fi à votre réseau domestique. Système de chauffage/refroidissement à thermopompe Des thermopompes sont utilisées pour chauffer et refroidir un immeuble.
Informations réglementaires Déclaration de conformité à la FCC (partie 15.19) (États-Unis uniquement) Cet appareil est conforme à la partie 15 du règlement de la FCC. Son fonctionnement est soumis aux deux conditions suivantes : 1 Ce dispositif ne doit pas causer d’interférences nuisibles, et 2 Ce dispositif doit accepter toutes les interférences reçues, y compris celles pouvant causer un fonctionnement non souhaité.
Informations réglementaires Thermostats Pour être conformes aux limites d’exposition aux radiofréquences établies par FCC et Industrie Canada pour le grand public/l’exposition non contrôlée, la ou les antennes utilisées pour ces transmetteurs doivent être installées à au moins 20 cm de toutes les personnes et ne peuvent être situées au même endroit qu’une autre antenne ou fonctionner conjointement avec une autre antenne ou un autre transmetteur. Section 7.1.
Garantie limitée d’un an Honeywell garantit ce produit, à l’exception des piles, contre tout défaut de pièce ou de main-d’œuvre, durant une période d’un (1) an à partir de la date d’achat par le consommateur si le produit est utilisé et entretenu convenablement. En cas de défectuosité ou de mauvais fonctionnement pendant la période de garantie, Honeywell remplacera ou réparera le produit, à sa discrétion.
Systèmes d’automatisation et de régulation Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 Honeywell Ltd 705 Montrichard Avenue Saint-Jean-sur-Richelieu, Québec J2X 5K8 wifithermostat.com ® Marque de commerce déposée américaine. Apple, iPhone, iPad, iPod touch et iTunes sont des marques de commerce de Apple Inc. Toutes les autres marques de commerce sont propriété de leurs propriétaires respectifs. © 2013 Honeywell International Inc. 69-2715EF—07 M.S. Rev.