Lyric™ Wi-Fi Water Leak and Freeze Detector INSTALLATION INSTRUCTIONS Download the Lyric app To setup and use your new leak detector, search for Honeywell Lyric in the App Store or Google Play. GET IT ON Lyric Before you begin Read these instructions carefully. Failure to follow these instructions can damage the product.
Need help? If you need help any point during the installation and setup of the Wi-Fi Water Leak and Freeze Detector, please contact Customer Care: Web: lyric.honeywell.com Email: MyLyric@honeywell.com Phone: 1-800-633-3991 For help, go to lyric.honeywell.
Contents Welcome • 1 Parts of your detector • 2 Placement • 3 Preparing for installation • 4 Download and install the app • 4 Power up the detector • 5 Pair and name your detector • 6 Connect to Wi-Fi • 7 Placement • 8 Optional cable sensor • 8 Configure the detector • 10 Select alert recipients • 11 App dashboard • 12 Temperature/Humidity trend • 12 Leak detected • 13 • 13 Using the Lyric Awareness app • 15 Rename a detector • 15 iii For help, go to lyric.honeywell.
Remove a detector • 16 Change alert settings • 17 Add alert recipients • 18 Remove alert recipients • 19 Reset • 20 Status LED • 20 Maintenance • 21 Frequently Asked Questions • 22 Specifications • 26 FCC Regulations • 27 IC Regulations • 28 Réglementation IC • 29 Warranty • 30 For help, go to lyric.honeywell.
Welcome Congratulations on your purchase of Honeywell’s Lyric™ Wi-Fi Water Leak and Freeze Detector. This sensor keeps an eye on your home or business, alerting you at the first sign of water leaks or large changes in temperature or humidity, which can help stop a leak before it becomes a flood, or alert you to conditions that can result in frozen pipes.
Parts of your detector LED Indicator Cable sensor Mounting keyhole (to hang on wall) Water sensors Cable sensor jack Sensor jack plug For help, go to lyric.honeywell.
Placement The detector and (if used) the optional cable sensor should be placed where leaks are likely to occur. For the most part, this will be on the bottom level of your home or business, near water sources, or anywhere you think leaks are possible. Locations to consider: • Floor drain • Water heater • Sump pump • Washing machine • Kitchen • Sink • Toilet 3 For help, go to lyric.honeywell.
Preparing for installation To install this product, you will need: • The Lyric app • Bluetooth connectivity turned on for your Android or Apple mobile device • Your Wi-Fi® password Download and install the app 1 Go to the App Store or Google Play and search for Honeywell Lyric. Follow instructions to download and install the free Lyric app. 2 After downloading, launch the app, register (if necessary), go to Menu, and then go to Add New Device.
Power up the detector It is important to install the app before you install the batteries. After the batteries are installed, the detector will begin attempting to pair with the app immediately. If you are installing multiple detectors, the easiest way to do it is to install the batteries in one leak detector at a time. If you have more than one leak detector attempting to pair with the app, you will see multiple MAC IDs listed in the app.
Pair and name your detector 1 Under Add New Device, select Lyric Water Leak and Freeze Detector. Note: Make sure Bluetooth is enabled on your mobile device. 2 Provide a location for your detector. Press NEXT. 3 The detector will now pair with the app. Note: If you have more than one detector, you will need to connect each detector individually. 4 An audible alert will sound and your detector’s LED will turn solid blue to indicate your detector is paired. Press NEXT.
Connect to Wi-Fi 1 Choose your network from the list. Press NEXT. 2 Enter your Wi-Fi password, if necessary. Press NEXT. 3 When connected to Wi-Fi, the LED will turn solid green for 5 minutes, then turn off to preserve battery life. Note: After you connect the detector to your Wi-Fi network the first time, if you remove and replace the detector’s batteries, it will reconnect to your Wi-Fi network automatically. Configure Continue to follow instructions in the app to configure your detector.
Placement The detector can simply be placed on a flat surface or used with the optional cable sensor to hang from a wall or be arranged on the ground. For wall mounting, use the included screw and hang the detector on the mounting keyhole. If the detector is placed on the floor, be sure the sensors have good contact with the floor. Optional cable sensor To install the optional cable sensor, remove the sensor jack plug and insert the cable sensor. Insert the sensor jack plug at the end the cable sensor.
The detector is connected. The detector is designed to “sleep” most of the time, only “waking up” when it senses water or indoor temperature or humidity that could be harmful to the building. Follow instructions in the app to configure your detector. You can set the high and low levels for humidity and temperature warnings, and identify the people you want notified in case of an alarm.
Configure the detector Selections you make here will determine how often the detector will send temperature and humidity readings to the app. They will also determine when and how you receive notifications for temperature or humidity alerts. No matter what settings you select, you will always be notified of temperature/humidity conditions and water leaks if they occur. 1 Select how often you want the detector to send updates to the app. More communications per day reduces battery life.
Select alert recipients Choose the people you want notified by e-mail when there is an alert condition. 1 2 Press the text box to add a contact. 3 If you want other people to receive alerts, press the Who else should receive emails? text box. 4 Select the contact from your address book. 5 Continue to add contacts until you are done. 6 If you want to remove contacts, press the X next to their name. 7 Press Finish. Select the contact from your address book. 11 For help, go to lyric.honeywell.
App dashboard The app dashboard displays historical information about temperature and humidity readings taken at the detector locations. It displays an alarm screen when a leak is detected. Temperature/Humidity trend Here is an example of the dashboard showing the 30-day trend of temperature and humidity settings. Press Temperature or Humidity to change from one to the other. The remaining battery life of the detector is displayed in the bottom-left corner of the screen.
Leak detected If a leak is detected, the detector will sound a loud alarm. IMPORTANT It can take up to one minute for the alarm to sound after water is detected. You can silence the alarm from the app by pressing the Mute button, then start the alarm again by pressing Unmute. IMPORTANT It can take up to one minute for Mute or Unmute commands to take effect. After you’ve addressed the cause of the alert, wipe dry the detector and cable sensor and put them back in place. 13 For help, go to lyric.honeywell.
Other alerts The app will alert you if temperatures drop below freezing or are otherwise above or below your settings; if humidity is above or below your settings, or if the detector loses its Internet connection. Use the app to find out more information about these warnings. To restore Internet connection, use the app or push one end of a paperclip into the detector’s reset hole. See “Reset” on page 20. Humidity outside of desired range Low temperature detected by device For help, go to lyric.honeywell.
Using the Lyric Awareness app Using the Lyric Awareness app, you have full remote connectivity to your detector. To see a snapshot of alerts and activity, press the message icon. Rename a detector You might want to rename your detector if you add other detectors to your network or if you move an detector to a different location. This is simple to do using the app. 1 2 3 Press the side menu button. Press Leak Detector.
Remove a detector If you need to remove a detector from your account, it is easy to do using the app. 1 2 3 4 Press the side menu button. Press Leak Detector. Press DELETE DEVICE. Press YES to confirm the deletion or NO to cancel it. For help, go to lyric.honeywell.
Change alert settings You can change how the detector and app handle alerts at any time. 1 2 3 Press the side menu button. 4 Press High/Low Humidity to change humidity alert settings. 5 Use the app to set the following: Press Alerts and Notifications. Press High/Low Temperature to change temperature alert settings. • 6 Alert - turns temperature or humidity alerts on or off. • Push Notifications - sends messages from the detector to your mobile device’s notification screen.
Add alert recipients You can change the detector’s alert recipients at any time. 1 2 3 4 Press the side menu button. 5 When you are done, press the Back arrow. Press Alerts and Notifications. Press Email Contacts. To add recipients, press the text box and add an email address, or button to open your press the Contacts list and select a recipient. For help, go to lyric.honeywell.
Remove alert recipients You can change the detector’s alert recipients at any time. 1 2 3 4 5 Press the side menu button. 6 7 Press Delete to confirm. 8 When you are done, press the Back arrow. Press Alerts and Notifications. Press Email Contacts. Press EDIT. Press the button next to the recipient you want to remove. If you decide not to delete the recipient, press CANCEL. 19 For help, go to lyric.honeywell.
Reset Use one end of a paperclip to press and hold into the reset hole for 5 seconds to reset Wi-Fi, detector settings, and to re-start Bluetooth pairing. The LED will blink blue. Press and hold the paperclip into the reset hole for 15 seconds to restore factory defaults. The LED will blink blue. Status LED The detector has an LED that gives device status. LED Detector state During installation Blinking Blue Powering up and connecting to Bluetooth. Solid Blue Paired with Bluetooth.
Maintenance Your detector requires no maintenance and the battery life should be approximately three years if using the correct batteries. Battery life might be shorter due to a number of factors (e.g., extreme cold or heat, multiple cable sensors, alert activity, frequency of status updates). If you have problems with your detector, consult “Frequently Asked Questions” on page 22. In case of an alert, address the cause of the alert, then wipe dry the detector and cable sensor and put them back in place.
Frequently Asked Questions Is there a preferred install height? The detector can be on the floor or hang at any height. The length of the supplied cable sensor is 4 feet (or 1.2 meters). You can attach additional cable sensors for additional coverage – up to 125 Cable Sensors connected for 500 feet or 150 meters. Water can touch any part of the cable for the alarm to sound. How do I locate the MAC ID on the detector? MAC IDs are printed in the detector’s battery compartment.
What type of alerts and notifications can I receive? (Note that you will only receive alerts and notifications that you’ve set up and enabled.) 1. Water: When the Water Leak Detector or Cable Sensor detects water A. 100dBA buzzer alarm will sound at device B. Red LED flashes at device C. Push notification is sent to your mobile device D. Email notification is sent to the email address connected to your Lyric App E. Email notification is sent to other email recipients set up in your Lyric App 2.
How will I know when the batteries need to be replaced? You should receive in-app, push and/or email notifications, depending on your settings, when the battery level reaches approximate values of 25% remaining (just a warning), 10% remaining (urgent), and 5% (critical), you will receive an in-app, push and/or email notification, depending on your settings. The detector starts beeping once every minute after reaching roughly 5% levels to remind you to replace batteries.
Will the detector work without Wi-Fi? Yes, the detector will sound a 100dB alarm when the detector senses water (through the built-in sensors or through the cable sensor). However, you will not receive inapp, push, and/or email notifications without a Wi-Fi connection. If you need further assistance, please contact customer care for help: Web: lyric.honeywell.com Email: MyLyric@honeywell.com Phone: 1-800-633-3991 25 For help, go to lyric.honeywell.
Specifications Battery: 3 AA Alkaline (included) Dimensions: 3.07 in. square x 1.26 in. thick (78 mm square x 32 mm thick) Weight: 0.
FCC Regulations § 15.19 (a)(3) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. § 15.
IC Regulations ICES-003 Issue 5 CAN ICES-3(B)/ NMB-3(B) RSS-210 Annex 9: A 9.4 The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology.
Réglementation IC NMB-003 5 édition CAN ICES-3(B)/NMB-3(B) RSS-210 Annexe 9 : A 9.4 L’appareil pourrait cesser d’émettre automatiquement en cas d’absence d’informations à transmettre, ou de panne. Il convient cependant de souligner que cela n’est pas destiné à interdire la transmission d’informations de contrôle ou de signalisation de codes répétitifs lorsque la technologie l’exige.
Warranty 2-year limited warranty Honeywell warrants this product, excluding battery, to be free from defects in workmanship or materials, under normal use and service, for a period of two (2) years from the date of first purchase by the original purchaser. If at any time during the warranty period the product is determined to be defective due to workmanship or materials, Honeywell shall repair or replace it (at Honeywell’s option).
31 For help, go to lyric.honeywell.
Lyric™ Wi-Fi Water Leak and Freeze Detector Automation and Control Solutions Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 lyric.honeywell.com ® U.S. Registered Trademark © 2017 Honeywell International Inc. 33-00080—02 M.S. Rev. 04-17 Printed in U.S.A.