CAUTION: ELECTRICAL HAZARD Can cause electrical shock or equipment damage. Disconnect power before beginning installation. CAUTION: EQUIPMENT DAMAGE HAZARD Compressor protection is bypassed during testing. To prevent equipment damage, avoid cycling the compressor quickly. CAUTION: MERCURY NOTICE If this product is replacing a control that contains mercury in a sealed tube, do not place the old control in the trash.
7 8 Record if you have wires in the following terminals Do not include jumpers as a part of your count. The thermostat does not need jumpers. Terminal Wire Color R Rh Rc Write down the color of the wires Check mark the wires that are connected to terminals. Next to the check mark, write down the color of the wire. Do not include jumpers as a part of your count.
Equipment Setup Options Option # Option Name Option Value (factory default in bold) 120 Schedule Type No Schedule MO-SU = Every day the same MO-FR SA SU = 5-1-1 schedule MO-FR SA-SU = 5-2 schedule Each Day = Every day different Note: You can change default MO-FR, SA-SU schedule here. To edit periods during days, temperature setpoints, or to turn Schedule On/ Off, touch MENU from the Home screen and go to SCHEDULE.
Equipment Setup Options Option # Option Name Option Value (factory default in bold) 220 Cool Stages/ Compressor Stages (#200=Conv./ #200=HP) 0, 1, 2 Note: Select how many Cool or Compressor stages of your equipment the thermostat will control. Maximum of 2 Cool/Compressor Stages. 221 Heat Stages/ Aux/E Stages (#200=Conv./ #200=HP) Heat Stages: 0, 1, 2 Aux/E stages: 0, 1 Note: Select how many Heat or Aux/E stages of your equipment the thermostat will control.
Frequently Asked Questions Will the T5 Smart Thermostat still work if Wi-Fi connection is lost? Yes, the temperature can be adjusted directly at the thermostat. However, some features, including geofencing, are managed only through the Honeywell Home app and will not function while the connection is down. The thermostat will automatically reconnect to Wi-Fi once the network is restored. The T5 Smart Thermostat is not finding the in home Wi-Fi network. The thermostat operates in the 2.4GHz range.
Frequently Asked Questions There is an alert that says Wi-Fi Signal Lost. What does that mean? The Wi-Fi signal to the thermostat has been lost. Wait for the thermostat to reconnect or select a new network within the Honeywell Home app configuration menu. If the thermostat is unable to reconnect, you will need to troubleshoot the router to determine the cause.
Apple® HomeKit™ Setup Code The T5 Smart supports Apple HomeKit. When prompted by the Honeywell Home app, scan the code on the last page (back cover) of this guide. 2-Year Limited Warranty For Warranty information go to honeywellhome.com Wi-Fi® is a registered trademark of Wi-Fi Alliance® Resideo Inc., 1985 Douglas Drive North Golden Valley, MN 55422 www.resideo.com 33-00498EF—01 M.S. 09-19 | Printed in United States ©2019 Resideo Technologies Inc.
MISE EN GARDE : RISQUE DE CHOC ÉLECTRIQUE Peut provoquer des chocs électriques ou endommager le matériel. Couper l’alimentation électrique avant d’effectuer le raccordement. MISE EN GARDE : RISQUE DE DOMMAGES DE L’ÉQUIPEMENT La protection du compresseur est annulée durant le test. Pour éviter d’endommager l’équipement, évitez d’actionner le compresseur trop rapidement.
7 8 Notez la présence de fils dans les bornes suivantes N’incluez pas les cavaliers. Le thermostat ne fonctionne pas avec des cavaliers. Borne Couleur de fil R Rh Rc Notez la couleur des fils Cochez les fils connectés à des bornes. Indiquez la couleur du fil à côté de la coche. Ne comptez pas les cavaliers.
Options de configuration de l’équipement N° de l’option Nom de l’option Valeur de l’option (réglage d’usine en gras) 120 Type de programme No Schedule (Pas de programme) MO-SU = Every day the same (LUN-DIM = Chaque jour identique) MO-FR SA SU = 5-1-1 schedule (LUN-VEN SAM DIM = Programme 5-1-1) MO-FR SA-SU = 5-2 schedule (LUN-VEN SAM-DIM = Programme 5-2) Each Day = Every day different (Chaque jour = Chaque jour différent) Remarque : Le programme par défaut LUN-VEN, SAM-DIM peut être modifié ici.
Options de configuration de l’équipement N° de l’option Nom de l’option Valeur de l’option (réglage d’usine en gras) 220 Étages de refroidissement / Étages du compresseur (200=Conv / 200=HP) 0, 1, 2 Remarque : Sélectionnez le nombre d’étages de refroidissement ou de compresseur contrôlés par le thermostat. 2 étages de refroidissement/compresseur maximum. 221 Étages de chauffage/ aux.
Foire aux questions Le thermostat intelligent T5 fonctionnera-t-il toujours, même si la connexion au Wi-Fi est perdue? Oui, la température peut être directement ajustée au niveau du thermostat. Cependant, certaines fonctions, dont Geofencing, peuvent uniquement être gérées au moyen de l’application Honeywell Home et ne pourront donc pas être utilisées sans connexion.Le thermostat se reconnecte automatiquement au réseau Wi-Fi une fois la connexion au réseau rétablie.
Foire aux questions Un message s’affiche indiquant que le signal Wi-Fi a été perdu. Qu’est-ce que cela veut dire? Le signal Wi-Fi du thermostat a été perdu. Attendez que le thermostat se reconnecte ou sélectionnez un nouveau réseau dans le menu de configuration de l’application Honeywell Home. Si le thermostat ne peut pas être reconnecté, vous devrez dépanner le routeur pour en déterminer la cause.