Quick-Start Guide
21
Let’s Get
Started
Download the Home App
Search for Honeywell Home app in the
App Store or Google Play. Download and
open the app. The app will guide you
step-by-step through the install.
FCC Regulations
§ 15.19 (a)(3)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
§ 15.21
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
§ 15.105
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or televions reception, which can be dtermined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
IC Regulations
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
IC Radiation Exposure Statement:
This equipment complies with IC RSS102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
Contains lithium ion batteries. Please dispose of properly and in accordance with local law.
Understanding your System
Base Station:
Access Sensor:
Motion Sensors: MotionViewers™:
Key Fob
Key Fob can be used inside your
home to change your security
mode with the press of a button.
Sensor Accessories
Your Camera Base Station can be paired with a number of devices (available separately) to extend
the system and your control of it. This included Motion Sensors and Access Sensors, Indoor and
Outdoor Motion Viewers, and a Key Fob.
Lights and Sounds
Here are some ways your Camera Base Station uses light and sound
to draw your attention and keep you aware of system status.
Voice commands
(Range for commands is 68 ft).
Say “OK Security,” then say one of the commands listed in the app.
Go to device settings for list of commands.
To tell base station to start listening:
“OK Security...”
Tell Base station to switch to Away mode:
“OK Security, Away”
“OK Security, I’m Leaving”
Tell Base station to switch to Night mode:
“OK Security, Bed Time”
Install Tip
Create your app
account or login to
an existing account
before plugging in
your Camera Base
Station.
Install Tip
Your Camera Base
Station will flash
blue when it’s ready
to be setup with the
app.
Microphone Off
Action Button
Adjust Volume
Camera
Privacy Ring
Speaker
Light
Large Half
Small Half
(with magnet)
Optional Small
Half Extender
(for doors and
windows with
uneven frames)
Outdoor
MotionViewer™
Indoor
MotionViewer™
Home
Off
Away
Sleep
Choose an area where your
Camera Base Station has
the widest view of
the home:
• Near the main entrance
• In the main living area
• On a kitchen counter
• On a mantle
Use App to Setup Camera
Base Station
Place your Camera Base Station where it
gets the widest view of your home.
33-00332ES-03
Honeywell | Home
Honeywell
1985 Douglas Dr N
Golden Valley, MN 55422
18006333991
yourhome.honeywell.com
® U.S. Registered Trademark.
© 2018 Honeywell International Inc.
3300332ES03 M.S. Rev. 0418
Printed in U.S.A.
Event Sounds like Looks like
Microphone Off
This button temporarily disables
the microphone. When Away,
microphone will reactivate.
Single tone Red steady glow
Entry Countdown
Use this time to cancel the siren
when in Night or Away.
Accelerating tone
followed by siren if
not disarmed
White pulsing light
during countdown
Departure Countdown
Use this time to leave the home
after Away is set.
Recurring tone
every second
Green pulsing light
during countdown
Notice
Keeps you aware of any minor
issues. Tap Action Button for
additional information.
Silent until you tap
the Action Button
Amber flutter
Urgent Notice
Keeps you aware of any critical
issues. Tap Action Button for
additional information.
Silent until you tap
the Action Button
Red flutter
Mode Looks like
Home
In this mode, you will hear a chime when doors and
windows open. Motion sensors are disabled.
White single pulse of light
fading to off to let you know
your sensors are disabled
Away
In this mode, opening a window or motion will trigger an
alarm, opening a door will start the Entry Countdown.
Green steady glow to let you
know all sensors are active
Night
In this mode, opening a window will trigger an alarm,
opening a door will start the Entry Countdown. Motion
sensors are disabled.
Purple steady glow to let you
know door and window sensors
are active
Home