Lyric™ C2 Wi-Fi Security Camera USER MANUAL Download the Lyric app To setup and use your new security camera, search for Honeywell Lyric in the App Store or Google Play. GET IT ON Lyric Before you begin Read these instructions carefully. Failure to follow these instructions may damage the product or cause it to not function as intended.
Need help? If you need help at any point during the installation and setup of the Wi-Fi Security Camera, please contact Honeywell Lyric Support: Web: YourHome.Honeywell.com Email: MyLyric@honeywell.
Contents Welcome • 1 Camera overview • 2 Placement • 3 With stand • 3 Without stand • 3 Installation • 4 Download the Honeywell Lyric app • 4 Launch the Lyric app • 4 Connect the power cord • 4 Connect • 5 Connect to mobile device • 5 Connect to Wi-Fi • 5 Status LEDs • 6 Operation • 7 Remove/replace the stand • 7 Lyric app experience • 7 Reset • 7 SD card • 7 iii
App overview • 8 Livestreaming • 9 Configure alerts • 10 Select alert notification type • 10 Select alert recipients • 11 Review clips • 11 Camera settings • 12 Turn the LED on and off • 14 Turn the microphone on and off • 14 Motion detection • 15 Sound detection • 16 Smoke or carbon monoxide alarm detection • 17 Baby cry detection • 17 Delete a camera • 18 iv
Set up detection zones • 20 Geofencing setup • 19 App settings and account info • 22 Manage messages • 23 Firmware update • 24 Frequently Asked Questions • 25 Specifications • 33 FCC Regulations • 34 Warranty • 36 v
vi
Welcome Congratulations on your purchase of Honeywell’s Lyric™ C2 Wi-Fi Security Camera. You can monitor visitors, pets, and family yourself—anytime, anywhere. What’s in the box? You should find: • Honeywell Lyric C2 Wi-Fi Security Camera • Optional mounting screws • Power cord and adapter • 8 GB microSD Card Download the app You need the Lyric app and an account to set up and use your new camera. GET IT ON Lyric Search for Honeywell Lyric in the App Store or Google Play.
Camera overview LED indicator Camera lens Power cord Stand/wall mount Backplate and rubber feet Reset hole SD card and slot 2
Placement With stand Place the camera in a desired location for viewing and recording. Without stand You can also mount the camera directly to the wall without the stand.
Installation Download the Honeywell Lyric app Note: Have your Wi-Fi password available and confirm your router is dual-band and communicates at 2.4/5 GHz before installation. 1 2 Make sure Bluetooth is enabled on your mobile device. 3 Download the Honeywell Lyric app. GET IT ON Lyric Search for Honeywell Lyric in the App Store or Google Play. 8:08 AM 100% Add New Device Select a device to install Launch the Lyric app Lyric Round 4 5 Launch the Lyric app.
Connect Connect to mobile device 1 2 Enable Bluetooth on your mobile device. The app will look for the camera. • For one camera, it will connect automatically. • For more than one camera, the app will prompt you to select one camera at a time. Each camera has a unique Media Access Control (MAC) ID printed on the back. The MAC ID is a unique identifier assigned to the camera. Use that ID to select the camera you want to connect. A QR code will display in the app as shown in the image above.
Status LEDs During Wi-Fi connection and camera operation, the LED shows the status of the camera. LED Camera state During installation Blinking Blue Powered up. Ready to begin setup. Solid Blue Connected to App. Ready to complete setup. Solid Red (for 2 seconds) Setup timed out, or connection failed. The LED will then turn solid purple. Unplug camera, plug it back in, and restart the process. Solid Purple QR Code scan complete. See “Connect to Wi-Fi” on page 5.
Operation Remove/replace the stand The C2 Camera snaps in and out of its stand. When replacing the camera, be sure to thread the power cord through the hole in the base of the stand. Lyric app experience When you launch the application, live video from your camera is displayed. If you have multiple cameras, a list of them is displayed. Select a camera from the list to view live video from that camera.
App overview These are the controls available during livestream. Camera on/off Press to turn the camera on or off. Motion/sound detector Press to turn the motion or sound detection alerts on or off during livestream. Snapshot control Press to take pictures during livestream. Images are saved to mobile device’s photos. Push to Talk Press and hold to speak out of the camera. Release to stop. Video clips When the camera detects motion or sound, it records a clip.
Livestreaming You can use your security camera to get a live look-in wherever you place the camera. The camera has a 145° field of view and will only show you what is within that range of view in the direction you point the camera. Place the camera so you can see what you want to monitor. Each livestream session lasts 90 seconds. When one livestream session ends, you can start a new one if you like. Use the Push to Talk button to talk to someone through the camera.
Configure alerts When the camera detects a sound or motion, it sends an alert to the app. 1 Press the Alerts icon when a red bubble appears. 2 The Alerts are displayed with the Alert type and the date/time stamp. 3 Press an alert to view the 30-second video clip. 4 Swipe left, then press Dismiss to remove the Alert. 5 To dismiss all Alerts, press Edit, then press DISMISS ALL. Select alert notification type 1 Press the side menu button on the home screen. 2 3 Press Alerts and Notifications.
Select alert recipients You can choose multiple people to have access to the camera and receive Alerts. 1 Press the side menu button on the home screen. 2 3 Press Manage Users. 4 Enter the email address of the person you want to add to the camera then press SEND. Press Add User at the bottom of the app. Review clips 1 Swipe up from the bottom of the home screen to show clips. 2 3 Press a clip to watch it. Press FILTER to sort the clips, then select a filter type (All, New, Viewed, Downloaded).
Camera settings Camera settings can be controlled in the app. You can set up things like night mode, use Lyric’s Geofencing capability, and turn on Motion or Sound Detection, and other settings. 1 Press the side menu button on the home screen. 2 Press the camera you want to change the settings on. Look for the name you gave the camera when installed. 3 To change the camera mode, press Camera Mode. 4 Press a setting for the camera mode: • Manual - turn the camera on or off using the app.
Video quality You can change the quality of your video stream. This will help limit data use on your mobile device. 1 Press the side menu button on the home screen. 2 Press the camera you want to change the settings on. Look for the name you gave the camera when installed. 3 4 Press Video Quality. Press a setting for video quality: • Auto - the camera adjusts its settings automatically. • Low - lower quality video that uses less data or bandwidth (VGA).
Turn the LED on and off If you want to turn the camera’s LED off (or back on), it is easy to do using the app. 1 Press the side menu button on the home screen. 2 Press the camera you want to change the settings on. Look for the name you gave the camera when installed. 3 Use the Camera LED switch to turn the LED on or off. Turn the microphone on and off If you want to turn the camera’s microphone off (or back on), it is easy to do using the app. 1 Press the side menu button on the home screen.
Motion detection You can turn motion detection on or off, as well as adjust the sensitivity. With sensitivity setting set to High, the camera can detect motion from as far as 20 feet away. You can use the Lyric app to adjust the sensitivity settings to High, Normal or Low as needed for your situation. In addition, you can create up to four motion detection zones for the camera. You can assign individual sensitivities to each zone, so that motion is detected in specific areas within the camera frame.
Sound detection You can turn sound detection on or off, as well as adjust the sensitivity. 1 Press the side menu button on the home screen. 2 Press the camera you want to change the settings on. Look for the name you gave the camera when installed. 3 4 Press Sound Detection. 5 Adjust the volume of sound that triggers a Sound Event within the camera’s sound detection range. Selecting Low, Normal, or High.
Smoke or carbon monoxide alarm detection Your camera is designed to detect and identify the sound of most common smoke or CO alarms and send you an alert if it does. The camera might not recognize the alarm sound as an alarm, so it might just send a sound detection alert. To ensure this feature works, you must go through a test protocol that verifies the following: • The camera is compatible with your smoke and CO detectors. • The camera is an appropriate distance from your smoke and CO detectors.
Delete a camera If you need to remove a camera from your account, it is easy to do using the app. 1 Press the side menu button on the home screen. 2 Press the camera you want to delete. Look for the name you gave the camera when installed. 3 4 Press Camera Configuration. Press DELETE CAMERA. Note: Deleting the camera from the app will result in losing all stored video clips that have not been saved to another device. 5 To re-install the camera, follow the steps in “Launch the Lyric app” on page 4.
Geofencing setup If you set up the camera to use geofencing to turn itself on and off, the camera will sense where you are through the location of your mobile device. Note: Turn geofencing on in the camera settings. See “Camera settings” on page 12. 1 Press the side menu button on the home screen. 2 3 Press Geofence. 4 When geofencing is on, the Location Status will indicate whether you are Home or Away.
Set up detection zones Draw your own alert zones for extra sensitivity or to ignore background motion such as a ceiling fan. 1 Press the side menu button on the home screen. 2 Press the camera you want to change the settings on. Look for the name you gave the camera when installed. 3 Press Motion Detection. Note: The app will need access to the camera so you can set up detection zones. 4 The default area for Zone 1 is the entire snapshot. To re-size, drag the rectangle from any corner or edge.
Set up detection zones 6 7 8 Press Zone 2. Press Enable this Detection Zone. Re-size or re-locate Zone 2 the same way you did Zone 1. Note: Zones can not overlap. 9 Set up Zone 3 and Zone 4 in the same way.
App settings and account info Follow these steps to see app settings such as version info, help, etc. 1 Press the side menu button on the home screen. 2 3 Press App Settings & Info. Select any of the menu options for more information. Follow these steps to see your account information, such as name, email address, password reset, etc. 1 Press the side menu button on the home screen. 2 3 Press My Account. Change your name, email address, password, or access. Follow the steps in the app to complete.
Manage messages Use the app to view and manage messages about motion or sound detected by your camera. 1 Press the side menu button on the home screen. 2 3 4 5 Press Messages. The messages are displayed. Press a message to read it. Press the back arrow to go back to the list of messages.
Firmware update As part of regular product upgrades, Honeywell will occasionally send a firmware update to your camera. The app will notify you that a firmware update is in progress, and that you must not turn off your camera while the firmware is being updated. These firmware upgrades are an important part of keeping your camera working properly. Important Do not unplug the camera during the firmware update.
Frequently Asked Questions How close must the security camera be to my internet router? The range of distance of the Wi-Fi signal is determined by your router. We recommend keeping the security camera within 30 feet (10 meters) of your router. This distance can vary depending on obstacles such as concrete or stucco walls, metallic barriers, or other interference. What kind of maintenance does my security camera need? Your camera requires no maintenance other than automatic firmware upgrades.
How many clips can be stored on the SD card? SD card storage is synced with the numbers of clips saved to the cloud and based on the storage tier you selected. Plan Clips stored 1-day storage (default) 7-day storage 30-day storage 50 350 1500 Can I modify the frames per second for smaller file sizes? No. The camera adjusts this automatically. The default rate is 30 frames per second. Can I connect the security camera to a computer to download recorded clips? No.
Can I use geofencing for more than one mobile device? Yes. Every mobile device linked in the Lyric account is tracked, so the security camera doesn’t turn on until the last mobile device leaves the geofence radius, and turns off again when the first one enters the geofence radius. What if I get too many motion or audio event notifications? Try setting up detection zones, and create exclusion zones by setting sensitivity as Off or Low. See “Set up detection zones” on page 20.
Why did the camera not detect the smoke alarm sound when I tested it for compatibility? The camera is programmed to detect a series of alarm sounds in case of smoke or fire provided that the smoke alarm device has beeped or sounded for at least 5 seconds. When you enable the intelligent sound detection feature and test the smoke alarm device, please press-and-hold the Test button on your smoke alarm device for AT LEAST FIVE SECONDS.
What should the audio sensitivity be set at, especially for successful smoke alarm detection? If your camera has been installed within a reasonable distance (approx. 32.8 feet or 10 meters) of the detector, you can keep it at normal sensitivity level. After you place the camera in the desired, permanent location, you should test the intelligent sound detection feature with your detector to ensure normal operation and that the alert is being sent to the app.
Is there a chance to have a high detection rate if I install this camera facing the smoke alarm direction? Our camera microphone is designed to detect the sound coming from all directions. So, you can place your camera wherever you want to focus, but follow the instructions above to ensure compatibility by testing it the first time you use it.
My camera keeps sending me many sound detected alert notifications every day. What should I do? Is there a way to avoid this? As our camera’s microphone sensitivity is very sharp, it will report whatever audio it hears and discerns in your premises. To avoid getting inundated with many notifications, you can adjust the audio sensitivity level and set it as “Low” on our sound configuration page on the Lyric App.
detected sound will be recorded for 30 seconds and sent to the cloud for you to view the clips through your App or download the clip to your smart device memory as required. How long will it take to create recorded video, once the camera detects smoke alarm or any other sound? The process starts almost immediately, but it could take 30 seconds or longer depending on your network and Wi-Fi performance to view the new clips on your Lyric App. My smoke detector is 10/20 years old.
Specifications Dimensions (W x H x D): 2.9 x 4.6 x 2.9 in. (73.7 x 116.8 x 73.7 cm) Weight Camera & Base: 5 oz. (142 g) Weight Camera Alone: 2.3 oz. (65 g) Video Resolution: 1080p Full HD @ 30 fps Video Resolution: 2 MP JPEG Video Compression: MPEG-4 (H.264) Field of View: 145° / 6x Digital Zoom Wi-Fi Connectivity: IEEE 802.11 b, g, n; Dual Band 2.4 / 5 GHz Minimum Bandwidth: 2.048 Mbps Power Supply: 5V / 2A AC Operating Temp.
FCC Regulations § 15.19 (a)(3) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. § 15.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. IC Regulations This device complies with Industry Canada license-exempt RSSs.
Warranty For warranty information, go to yourhome.honeywell.
37
Lyric™ C2 Wi-Fi Security Camera Home and Building Technologies Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 YourHome.Honeywell.com ® U.S. Registered Trademark © 2017 Honeywell International Inc. 33-00292—01 M.S. 08-17 Printed in U.S.A.
