Submittal Sheet

ManualsBrandsHoneywell ManualsCurrent SensorsMLH Series Gauge Pressure Sensor (0-500 psig, 4-20mA, 1/4" SAE Female Schrader)

Table Of Contents

PRODUCT DATA

62-0296-03

MLH Series

Gauge Pressure Sensors

DESCRIPTION

The MLH Series is a two-wire 4-20mA gauge pressure sensor.

This digitally compensated sensor offers an unparalleled value

and performance combination, making it the ideal pressure

sensing solution for demanding applications. The MLH series

is available in pressure ranges up to 1000 psi.

FEATURES

• Available in 50, 150, 300, 500 and 1000 psi.

• All metal wetted parts for use in a wide variety of fluid

applications.

• Suitable for use with refrigerants.

• No internal elastomeric seals mean no o-ring

compatibility issues.

• 3 meter cable standard.

• Reverse polarity and overvoltage protection—protects

against reversed excitation.

• Less than 2 ms response time provides accurate, high

speed measurement.

• Select models available with 1/4-in. SAE female

Schrader connection with valve depressor.

• Exceeds CE heavy industrial EMC for use in areas of

high RFI/EMI.

Models:

Old Part Number New Part Number Pressure Range Pressure Connection

50035430-050/U MLH050PSCDJ1235 0-50 psig 1/4"-18 NPT

50035430-150/U MLH150PSCDJ1236 0-150 psig 1/4"-18 NPT

50035430-300/U MLH300PSCDJ1237 0-300 psig 1/4"-18 NPT

50035430-500/U MLH500PSCDJ1240 0-500 psig 1/4" SAE female Schrader

50035430-01K/U MLH01KPSCDJ1241 0-1000 psig 1/4" SAE female Schrader

Summary of content (4 pages)

PAGE 1
MLH Series Gauge Pressure Sensors PRODUCT DATA FEATURES • Available in 50, 150, 300, 500 and 1000 psi. • All metal wetted parts for use in a wide variety of fluid applications. • Suitable for use with refrigerants. • No internal elastomeric seals mean no o-ring compatibility issues. • 3 meter cable standard. • Reverse polarity and overvoltage protection—protects against reversed excitation. • Less than 2 ms response time provides accurate, high speed measurement. • Select models available with 1/4-in.
PAGE 2
MLH SERIES GAUGE PRESSURE SENSORS SPECIFICATIONS RED 31/64 (12) #8-32 ROLLED THREADS THRU ALL Ø 9/64 (4) Proof Pressure: 3X Working Pressure Range (50-500 psi) 2X Working Pressure Range (1000 psi) 1 (25) Ø 3/64 (1) #1/4-18 NPT 5/32 (4) WHITE 35/64 (14) M29496 Fig. 1. MLH050PSCDJ1235/MLH150PSCDJ1236/ MLH300PSCDJ1237 dimensions in in. (mm). Burst Pressure: 10X Working Pressure Range Dimensions: See Fig. 1 and 2.
PAGE 3
MLH SERIES GAUGE PRESSURE SENSORS A pigtail siphon should be installed to protect the sensor element from damage that can occur from direct exposure to high temperature steam. A pressure “snubber” may be used to reduce the peak pressure applied to the sensor. Snubbers may be obtained from the Mott Corp., Farmington, CT, USA (860) 747-6333. Catalog #4100-1/8-SS is recommended.
PAGE 4
MLH SERIES GAUGE PRESSURE SENSORS By using this Honeywell literature, you agree that Honeywell will have no liability for any damages arising out of your use or modification to, the literature. You will defend and indemnify Honeywell, its affiliates and subsidiaries, from and against any liability, cost, or damages, including attorneys’ fees, arising out of, or resulting from, any modification to the literature by you. Automation and Control Solutions Honeywell International Inc.