Personal Automatic Hand Dryer Owner’s Manual HPD-100B Please read and retain these instructions.
CONTENTS SAFETY INSTRUCTIONS ........................................................................................... 3 PRODUCT VIEW ......................................................................................................... 4 QUICK START GUIDE ................................................................................................. 5 INSTALLATION ........................................................................................................... 6 MACHINE MAINTENANCE .......
SAFETY INSTRUCTIONS When using this appliance follow these safety precautions to reduce the risk of fire, electric shock, or injury. WARNING 1. Only use the power cord that comes with the machine. Using a different power cord may result in electric shock, fire, or cause serious damage to the machine. 2. Plug the power cord into a properly grounded wall outlet. If the electrical outlet you intend to use is not adequately grounded, you should have a qualified electrician install the proper outlet. 3.
PRODUCT VIEW 1. 2. 3. 4. 5. 6.
QUICK START GUIDE 1. 2. 3. 4. 5. Plug the power cable into a wall power outlet. Select temperature option (Warm/Cool). Turn the power switch to On. Insert hands under the open space to engage the dryer. The removal of hands will deactivate the dryer.
INSTALLATION Table-top • Place the unit on a level, flat surface and plug into a wall outlet. Wall-mount 1. 2. 3. 4. 5. Select the ideal mounting location based on power source and height of users. Drill two level holes 100mm (3.94 in.) apart with the expansion screws (1 in. screws included) Remove main unit from base by rotating the unit clockwise. Select temperature option (Warm/Cool) and turn the power switch to the On position. Store removed base in safe place for the option of future use.
TROUBLESHOOTING In case of problems, first turn off the hand dryer and disconnect from the source of electricity. Symptom Solutions Hand Dryer is not warm • Temperature option might be set to Cool. Turn the temperature switch to Warm (see page 4). • Could be a defective heating element. Call customer service for a replacement heating element. Hand Dryer does not start • There might be no power to the unit. Check that the machine is plugged in and set to the On position (see page 4).
ONE YEAR LIMITED WARRANTY Royal Sovereign International, Inc. warranties this product to be free from defects in material and workmanship for a period of one (1) year. This warranty is extended to the original purchaser only. This warranty only covers products that are properly installed, properly maintained, and properly operated in accordance with the instructions provided.
