PRO-2200 Power Supply With Battery Backup* Installation Manual Part Number: PRO22E1PS * 4 amp hour and 7 amp hour backup battery sold separately.
Installation Guide PRO-2200 Power Supply With Battery Backup PRO22E1PS
PRO-2200 Power Supply With Battery Backup PRO22E1PS Installation Guide 3 Contents Warnings and Cautions .........................................................................................4 Disclaimer .............................................................................................................6 Product Liability; Mutual Indemnification ...............................................................6 Unpacking Procedure .................................................................
Installation Guide PRO-2200 Power Supply With Battery Backup PRO22E1PS Warnings and Cautions WARNING Before installation, TURN OFF the external circuit breaker which supplies power to the system. Before connecting the device to the power supply, verify that the output voltage is within specifications of the power supply. Do not apply power to the system until after the installation has been completed.
PRO-2200 Power Supply With Battery Backup PRO22E1PS Installation Guide 5 CAUTION IF ANY DAMAGE TO THE SHIPMENT IS NOTICED, A CLAIM MUST BE FILED WITH THE RESPONSIBLE COMMERCIAL CARRIER. CAUTION Electro-static discharge can damage CMOS integrated circuits and modules. To prevent damage always follow these procedures: Use static shield packaging and containers to transport all electronic components, including completed reader assemblies.
Installation Guide PRO-2200 Power Supply With Battery Backup PRO22E1PS Disclaimer Product Liability; Mutual Indemnification In the event that a Customer receives a claim that a Product or any component thereof has caused personal injury or damage to property of others, Customer shall immediately notify Northern in writing of all such claims.
PRO-2200 Power Supply With Battery Backup PRO22E1PS Installation Guide 7 Shipping Instructions To ship equipment back to Northern Computers, Inc.: 1. Contact the customer service department before returning equipment at 800-323-4576. Please have the following available when calling: • A description of the problem or reason equipment is being returned. • Original purchase order number, invoice number and warranty information - if the unit is still under warranty.
Installation Guide PRO-2200 Power Supply With Battery Backup PRO22E1PS Confidentiality All software, drawings, diagrams, specifications, catalogs, literature, manuals and other materials furnished by Northern relating to the design, use and service of Products shall remain confidential and shall constitute proprietary rights of Northern, and Customer agrees to treat such information as confidential.
PRO-2200 Power Supply With Battery Backup PRO22E1PS Installation Guide 9 PRO-2200 Enclosure Description The PRO22E1PS is a 4 amp power supply with battery backup control. The unit mounts in the PRO22ENC1, PRO22ENC2 or the PRO22ENC5 by sliding the unit vertically into the right most card guide. The PRO22E1PS can be wired to the PRO-2200 I/O with the selfcontained cabling. The unit can supply up to 4 amps to the 9 panels used in the PRO2200 enclosure system.
Installation Guide PRO-2200 Power Supply With Battery Backup PRO22E1PS Dimensions Height: Width: Depth: 9" 5.5" 2.2" Power Supply • 12 VDC 4 amp continuous power limited output with backup battery charging and battery supervision • The power supply is not rated for lock power • The power supply can accept 85 VAC to 230 VAC at 50/60 hz • 110 VAC/60 hz .5 amp • 220 VAC/50 hz .25 amp • Maximum battery charging current .
PRO-2200 Power Supply With Battery Backup PRO22E1PS NOTES Installation Guide 11
Installation Guide PRO-2200 Power Supply With Battery Backup PRO22E1PS Installation Instructions 1. Remove the PRO22E1PS from packaging material. 2. Remove the PRO22E1PL from the plastic bag. Place the LED end into the small round hole at the bottom of the PRO22ENC1 or PRO22ENC2 (see diagram). Make sure that the red LED is to the outside of the enclosure. 3. Remove the PRO22E1PO from the plastic bag.
PRO-2200 Power Supply With Battery Backup PRO22E1PS Installation Guide 13. CHECK ALL WIRING BEFORE POWERING UP THE PRO22E1PS. Unrepairable damage could result from improper wiring. Power up the PRO22E1PS. All panels connected should go through their particular start up sequence. See individual installation manuals for more detail.
Installation Guide PRO-2200 Power Supply With Battery Backup PRO22E1PS Cable Specifications Application NCI Part No. AWG Description Max. Dist. Imp. 4000' (1200 m) 120Ω 12.
PRO-2200 Power Supply With Battery Backup PRO22E1PS Installation Guide 15 NCI Cable Part Numbers Part Number Description Application Length NC1841-GY 18 AWG/4 conductor reader cable 1,000' NC1861-BL-500 18 AWG/6 conductor reader cable 500' NC1861-BL 18 AWG/6 conductor reader cable 1,000' NC18121-YL-500 18 AWG/12 conductor keypad cable 500' NC18121-YL 18 AWG/12 conductor keypad cable 1,000' NCNET-1 50 ohm network cable 1,000' NC2221-BR 22 AWG/2 conductor alarm cable 1,000'
Honeywell Security & Data Collection 2700 Blankenbaker Pkwy, Suite 150 Louisville, KY 40299 (800) 675-3364 www.honeywellaccess.
