Cover 3/6/07 11:08 AM Page 1 N B KMD 550/850 Multi-Function Display Pilot’s Guide For Software Version 02/01 or later Revision 8 Mar/2007 006-18222-0000
Cover 3/6/07 11:08 AM Page 2 The information contained in this manual is for reference use only. If any information contained herein conflicts with similar information contained in the Airplane Flight Manual Supplement, the information in the Airplane Flight Manual Supplement shall take precedence. Covered by US Pat. 6512975 WARNING Prior to export of this document, review for export license requirement is needed. COPYRIGHT NOTICE Copyright ©2000 - 2005, 2007 Honeywell International Inc.
REV Hist 8 3/6/07 11:02 AM Page 1 Revision History Manual KMD 550/850 Pilot’s Guide Revision 8, March 2007 Part Number 006-18222-0000 Summary Added XM functionality Added DTK readout on Map page Updated SUA boundary labels R-1
REV Hist 8 3/6/07 11:02 AM Page 2 Revision History Manual KMD 550/850 Pilot’s Guide Revision 7, September 2005 Part Number 006-18222-0000 Summary Changed Stormscope® to registered trademark Updated displays Miscellaneous corrections R-2
REV Hist 8 3/6/07 11:02 AM Page 3 Revision History Manual KMD 550/850 Pilot’s Guide Revision 6, June 2004 Part Number 006-18222-0000 Summary Changed lightning symbols to white Changed airspace classifications Changed display color for Danger, Prohibited and Restricted Airspace Added black border to active flight plan leg display Updated startup pages Miscellaneous corrections R-3
REV Hist 8 3/6/07 11:02 AM Page 4 Revision History Manual KMD 550/850 Pilot’s Guide Revision 5, January 2003 Part Number 006-18222-0000 Summary Complete manual revision R-4
REV Hist 8 3/6/07 11:02 AM Page 5 Revision History Manual KMD 550/850 Pilot’s Guide Revision 4, January 2003 Part Number 006-18222-0000 Summary Complete manual revision R-5
REV Hist 8 3/6/07 11:02 AM Page 6 Revision History Manual KMD 550/850 Pilot’s Guide Revision 3, May 2002 Part Number 006-18222-0000 Summary Complete manual revision R-6
REV Hist 8 3/6/07 11:02 AM Page 7 Revision History Manual KMD 550/850 Pilot’s Guide Revision 2, November 2001 Part Number 006-18222-0000 Summary Improved display of traffic overlay on the Map Page Small Traffic Window is no longer displayed when the Map Page is in the north-up orientation. The Map Setup Page may be configured to be inaccessible to the .
REV Hist 8 3/6/07 11:02 AM Page 8 Revision History Manual KMD 550/850 Pilot’s Guide Revision 1, April 2001 Part Number 006-18222-0000 Summary Revised Database Warning Page Added GCO frequencies to Airport MORE INFO Window Added Heliroutes and Helipads to Map Page Airplane symbol now oriented to heading on Map Page Added traffic display functions Changed lightning symbols and Function Display Icon for strikes with in 25 nm Corrected miscellaneous errors R-8
REV Hist 8 3/6/07 11:02 AM Page 9 Revision History Manual KMD 550/850 Pilot’s Guide Revision 0, October 2000 Part Number 006-18222-0000 Summary This is the original release of this publication.
REV Hist 8 3/6/07 11:02 AM Page 10 This page intentionally left blank.
toc R8 3/6/07 11:31 AM Page i Table of Contents INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 FUNCTION SELECT KEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 POWER KEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 POWER LABELS . . . . . . . . . . . . . . . . . . . . . . . . . .
toc R8 3/6/07 11:31 AM Page ii Table of Contents SYSTEM SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 MAP SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 WX-500 STORMSCOPE® SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 DATA CARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
toc R8 3/6/07 11:31 AM Page iii Table of Contents FUNCTIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Selecting Stormscope® or Weather Radar . . . . . . . . . . . . . . . . . . .42 Power-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 Switch Between Weather Views . . . . . . . . . . . . . . . . . . . . . . . . . . . .
toc R8 3/6/07 11:31 AM Page iv Table of Contents Intentionally left blank Rev 8 Mar/2007 iv KMD 550/850 Pilot's Guide
KMD 550-850 PG R8 3/6/07 11:22 AM Page 1 Introduction INTRODUCTION All of us at Honeywell congratulate you on choosing this product. You are now the owner of one of the most sophisticated yet simple-to-use multifunction displays available today. We understand you probably can’t wait to see it in action but before you try to use it please take the time to read through this manual and understand its many interesting and useful features.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 2 Introduction Intentionally left blank Rev 5 Jan/2003 2 KMD 550/850 Pilot's Guide
KMD 550-850 PG R8 3/6/07 11:22 AM Page 3 General Information GENERAL INFORMATION This section of the manual provides an overview of the software architecture and display presentation of the KMD 550/850 Multifunction Display. This manual also provides an explanation of each of the individual displays that the KMD 550/850 unit presents.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 4 General Information FUNCTION SELECT KEYS These keys are used to select available data sources (as indicated on the key) for display on the LCD. When a function key is pressed, the annunciator above it will illuminate to show that this function is presently being displayed. Pressing the same Function Select Key multiple times will sequence through the available pages associated with that function.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 5 General Information OVLY- Pressing the Overlay Key allows data from more than one source to be displayed simultaneously on the display. Soft Labels will indicate which data sources are available for overlay. SOFT LABELS Soft Labels are located to the left of the Power Keys in the LCD area. The description indicated in the label describes the key’s present function related to the displayed page.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 6 General Information NOTE: IF THE FAULT INDICATOR IS LIT, ALL DISPLAYED DATA SHOULD BE TREATED AS SUSPECT AND CROSS-CHECKED FOR ACCURACY BEFORE USE. The following illustration describes the data that appears on the Map Display Page. 16 14 15 13 12 11 17 10 9 18 8 7 1 6 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 3 4 5 Display Range - RNG:####nm Current Track - TRK:### Current Ground Speed - GS:###kt Distance to Pointer - PDIS: ###.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 7 General Information STORMSCOPE® OPTION The KMD 550/850 has the ability to interface and control an L3 WX-500 or WX-1000E Stormscope® ‘black box’ thunder storm sensor. When the Stormscope® interface is on and the overlay is enabled, lightning icons will also appear on the display. OBSTACLE LABELS Obstacles are labeled with two numbers. The first number is the height of the obstacle in FEET ABOVE MSL.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 8 General Information CAUTION NEVER USE THE TOPOGRAPHIC ELEVATION DISPLAYED ON THIS EQUIPMENT AS YOUR SOLE REFERENCE FOR TERRAIN AVOIDANCE. STARTUP DISPLAY This display will be seen after power-up. The Stormscope® logo will only be present if a WX-500 Stormscope ® is installed and enabled. Notice the self test results are also displayed. Pressing the OK Soft Key will show the next display.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 9 Operation OPERATION SELECTING A MAP DISPLAY Press the MAP Function Select Key to toggle between TOPO ON or TOPO OFF. With TOPO ON classes of data are displayed as a specific color. With TOPO OFF all cartographic data is automatically removed and the Jeppesen Nav Data is presented on a black background. A color key can be displayed on the Map display when in TOPO ON mode.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 10 Operation If there is no valid GPS or FMS position fix data available, the words NO EXTERNAL POSITION DATA will be shown across the center of the display in a box. If the fix is lost at any time during normal operation of the unit, the same NO EXTERNAL POSITION DATA box will be overlaid on the map. NOTE: Do not use the map for navigation while this message is displayed.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 11 Operation 3. The flight plan overlay is removed via the OVLY menu. The small boxes marked TRK: and GS: display your present track and ground speed. Track will be magnetic (i.e.: true with local variation automatically taken into account). The box marked POS: will display your present position as a distance and bearing from the nearest item in the database.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 12 Operation Simultaneously, boxes labeled PDIS and PBRG are displayed. These show the distance and bearing from present position to the joystick pointer. This function can be used to measure distance and bearing to any point on the map. The window formed by the extremities of the display can be moved around the map by "bumping" the display borders left, right, up or down with the pointer. The RNG Δ and RNG ∇ keys can still be used to zoom the map in and out.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 13 Operation Finding Airports by Entering Identifier 1. The cursor will be over the first character of the airport identifier. Select the desired character by turning the inner knob. 2. Turn the outer knob one click clockwise to move the cursor to the next character field as shown in Figure 7. Turn the inner knob to select the desired character. 3. Continue changing fields and entering characters until the desired airport information is displayed. 4.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 14 Operation Finding Airports by Name or City When the identifier of the desired airport is known (or a part thereof), the methods previously described can be used for selection. However, if the identifier is not known, the name of the airport can be entered. The system will also allow entry of just the first few characters of the airport name to help find it in the database. If neither the identifier nor the location name is known, the city/state can be scanned.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 15 Operation 5. Turn the outer knob clockwise until the cursor is positioned for the next character. Turn the inner knob to select a G as in Figure 12. 6. Since EAGLE is now displayed, turn the outer knob clockwise until the cursor is positioned for the next character entry as shown in Figure 13. 7. Turn the inner knob to select a G as in Figure 14. The desired airport is now displayed because it is the first database instance with a G in this field. Figure 12 8.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 16 Operation 3. Turn the outer knob clockwise until the cursor is positioned as in Figure 15. 4. Turn the inner knob to sequence through all the airport names in the database beginning with EAGLE, stopping at the desired name as in Figure 16. NOTE: This same method may be used with the name of the city where the airport is located. Figure 15 5.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 17 Operation AIRSPACE INTERROGATION In order to interrogate a piece of airspace on the Map display, move the joystick operated pointer and point at one of the airspace boundaries. After releasing the joystick, the software will search the airspace database and after a short time will re-draw the piece of airspace to which you have pointed in a bolder line with a basic information tag attached.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 18 Operation If the KLN 94 is supplying the GPS data, and the KLN 94 is configured to produce the “Enhanced RS-232 GPS bus”, the KMD 550/850 will display the curved paths including DME arcs, Procedure Turns and Holding Patterns. Figure 19 is an example of a DME arc display.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 19 Operation OVERLAY TYPE DISPLAY FLIGHT PLAN STORMSCOPE® TRAFFIC METAR Yes Yes1 Yes2 Yes MAP - TOPO OFF Yes Yes1 Yes2 Yes WX - Weather Radar Yes1 Yes Yes3 No WX - Stormscope® Yes1 N/A No No WX - NEXRAD Yes Yes1 No No WX - Graphical METARs Yes No No N/A WX - Graphical AIRMETs Yes Yes1 No No WX - Graphical SIGMETs Yes Yes1 No No WX - Graphical Conv SIGMETs Yes Yes1 No No Yes4 Yes1, 4 No No TERR Yes Yes1 Yes2 No
KMD 550-850 PG R8 3/6/07 11:22 AM Page 20 Operation VIDEO DISPLAY If the unit has a NTSC video source connected, pressing AUX will display the video. Note that on the video display no icons are shown.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 21 System Setup SYSTEM SETUP This section of the manual is designed to provide step by step instructions for the setup of the KMD 550/850. Note that not all features discussed in this section are available in all installations. INTRODUCTION The KMD 550/850 unit is operated via a joystick, a series of five Power Keys located along the right side of the unit, a series of Function Select Keys located along the bottom, and an inner and outer Control Knob.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 22 System Setup EXTENDED TRACK: Turns on or off the extended track line, which is drawn ahead of the present position in the direction of the present track. RANGE RINGS: Turns range rings on or off in MAP Mode. AUTO DECLUTTER: Turns on or off. If a higher priority icon label (Airport) is found to clash with a lower priority icon label (City) already on the display, the lower priority icon label will be removed.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 23 System Setup LINE MAX: This field can be set to the maximum range, in nautical miles, that this item’s symbol is displayed on the map display. NAME MAX: This field can be set to the maximum range, in nautical miles, that the text name of this item is displayed on the map display. MIN: This field can be set to the minimum range, in nautical miles, that this item’s symbol and text name is displayed on the map display. Press NEXT to display Figure 25.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 24 System Setup WX-500 STORMSCOPE® SETUP Press the WX SETUP Key shown in Figure 21. Figure 26 will now be displayed. Figure 26 Press the STORM SCOPE Key to display Figure 27. Figure 27 Press the NOISE CHECK Key to display the noise check display in Figure 28.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 25 System Setup Press the PREV PAGE Key to again display Figure 27. Press the STRIKE TEST Key to display the strike test page shown in Figure 29. Figure 29 Press the PREV PAGE Key to again display Figure 27. To perform a system self test, press the SELF TEST Key and the self test page will be displayed as shown in Figure 30. Figure 30 After the Self Test is complete, Figure 31 will be displayed. Press the PREV PAGE Key to again display Figure 27.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 26 System Setup Intentionally left blank Rev 5 Jan/2003 26 KMD 550/850 Pilot's Guide
KMD 550-850 PG R8 3/6/07 11:22 AM Page 27 Data Cards DATA CARDS DATA AREAS Honeywell produces three data cards based on the ICAO/ARINC geographic areas for KMD 550/850 that cover the entire world. Each card for each area contains the operating software, the appropriate Jeppesen aeronautical data, cartographic data and topological data to a high resolution. Also included is a low resolution map of the rest of the world.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 28 Data Cards CHANGING THE DATA CARD To change the data card follow these simple steps: 1. Turn off the KMD 550/850. 2. Grasp the data card and pull it straight out of its socket. 3. With the card facing upward, as indicated on it’s label, insert the new data card being careful to align the card with the socket then press the new card firmly into place. 4. Turn the unit on and check for correct operation.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 29 Definitions, Acronyms & Abbreviations DEFINITIONS, ACRONYMS AND ABBREVIATIONS DEFINITIONS Alphabetic: any of the following characters (b/ is a space): b/ABCDEFGHIJKLMNOPQRSTUVWXYZ. Alphanumeric: any of the following characters (b/ is a space): b/ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789. Baud: bits per sec Barometric Altitude: pressure altitude corrected for barometric altimeter setting.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 30 Definitions, Acronyms & Abbreviations Tailwind: difference between ground speed and true airspeed when ground speed is more than true airspeed. Track: angle of the aircraft’s path over the ground measured clockwise relative to north.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 31 Definitions, Acronyms & Abbreviations CTZ: Control Tower Zone dB: decibels DEP: Departure DC: Direct Current DIS: Distance DME: Distance Measuring Equipment DOT: United States Department of Transportation DTK: Desired Track EFIS: Electronic Flight Instrument System EGPWS: Enhanced Ground Proximity Warning System ELT: Emergency Locator Transmitter ESA: Enroute Safe Altitude ETE: Estimated Time Enroute FAA: Federal Aviation Administration
KMD 550-850 PG R8 3/6/07 11:22 AM Page 32 Definitions, Acronyms & Abbreviations IEEE: Institute of Electrical and Electronics Engineering IFR: Instrument Flight Rules in.: inches INT: Intersection kHz: kilohertz Kt.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 33 Definitions, Acronyms & Abbreviations OSGB: Ordnance Survey of Great Britain PAI: Pacific International data area PETE: Pointer ETE RAD: Radial REF: Reference RMI: Radio Magnetic Indicator RTCA: Radio Technical Commission for Aeronautics sec: seconds TAS: True Airspeed TAT: Total Air Temperature TD: Time Difference TMA: Terminal Control Area TOPO: Topographical Data (i.e.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 34 Definitions, Acronyms & Abbreviations µV: microvolts °C: degrees Celsius °F: degrees Fahrenheit Rev 8 Mar/2007 34 KMD 550/850 Pilot's Guide
KMD 550-850 PG R8 3/6/07 11:22 AM Page 35 WX-500 Stormscope® Operation WX-500 STORMSCOPE® OPERATION INTRODUCTION The Bendix/King KMD 550/850 is capable of being interfaced to an L3 WX-500 Stormscope® Series II Weather Mapping Sensor. The WX-500 detects electrical discharges associated with thunderstorms within a 200 nm radius of the aircraft.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 36 WX-500 Stormscope® Operation POWER-UP At power-up, the WX-500 executes a power-up self test. The self test takes approximately 25 seconds to ensure that all major WX-500 functions are operating properly. During this period you may receive a NO DATA RECEIVED FROM STORMSCOPE message, this is normal. Functions tested include antenna reception, memory and microprocessor functions. An error message is displayed if a fault is detected.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 37 WX-500 Stormscope® Operation SWITCH BETWEEN DISPLAY MODES The KMD 550/850 can display the Stormscope® data in one of two modes, either Cell Mode or Strike Mode. To switch the display between modes press the MODE button. The currently selected weather display mode is indicated on the top left of the display and will toggle between CELL MODE and STRIKE MODE with each press of the button as shown in Figures 32 and 33.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 38 WX-500 Stormscope® Operation Strike Display Mode If the strike display mode is selected, the KMD 550/850 immediately plots an "x" symbol (discharge point) on the display for each individual discharge it detects within the selected range and view.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 39 WX-500 Stormscope® Operation OPERATION IN STORMSCOPE® MODE WITH FLIGHT PLAN OVERLAY If the KMD 550/850 is receiving Flight Plan information from the GPS and a valid heading input is available, the Flight Plan lines and waypoints may be displayed on the Stormscope® displays in the form of an overlay. Press the OVLY key and select FLIGHT PLAN by pressing the appropriate Softkey as in Figure 34.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 40 WX-500 Stormscope® Operation Lightning Icon Color White White White Outline White Outline Used on Pages Additional Requirements MAP (TOPO-ON or The small solid icon is used when TOPO-OFF) the display selected range is 25 nm or greater. WX, TRFC, TERR MAP (TOPO-ON or The large outlined icon is used TOPO-OFF) when the display selected range is less than 25 nm.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 41 WX-1000E Stormscope® Operation WX-1000E STORMSCOPE® OPERATION INTRODUCTION The Bendix/King KMD 550/850 is capable of being interfaced to an L3 WX-1000E Stormscope® Series II Weather Mapping Sensor. The WX1000E detects electrical discharges associated with thunderstorms within a 200 nm radius of the aircraft.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 42 WX-1000E Stormscope® Operation SELECTING STORMSCOPE® OR WEATHER RADAR Pressing the WX Function Select Key will toggle between Stormscope ® and/or Weather Radar, depending on available options. The weather radar function is only available in the KMD 850. For operation of the weather radar, see the separate section on weather radar operation if provided. POWER-UP At power-up, the WX-1000E executes a power-up self test.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 43 WX-1000E Stormscope® Operation lightning activity detected within the new range. The range indicator will also change to display the numerical value of the new range (25, 50, 100, or 200 nm). This new range corresponds to the distance from the aircraft to the outer range ring on the display. As you move from one range to the next, the 25 nm range is always indicated by the solid inner ring to advise you of your close proximity to thunderstorms.
KMD 550-850 PG R8 3/6/07 11:22 AM Page 44 WX-1000E Stormscope® Operation The following shows the lightning icons as they appear on the Map display. The range at which lightning icons are displayed is selectable on Map Setup Page 2.
Appendix A ICONS R8 3/6/07 11:27 AM Page 1 APPENDIX A DISPLAY ICONS The following is a list of possible map icons on the TOPO ON Map and TOPO OFF Map. Feature Conditions Icon / Colors TOPO on Political Boundary Lines TOPO off Dashed black line Not displayed When the 500 nm range is selected, the name of the political region will be displayed with a white on black label. Dark gray line with hack marks Not displayed May be enabled or disabled based on Map Setup page (3) setting.
Appendix A ICONS R8 3/6/07 11:27 AM Page 2 Feature Conditions TOPO on TOPO off Airspace Boundary FIR/UIR Solid magenta line with black on white label Solid blue line with black on white label May be enabled or disabled based on Map Setup page (4) setting. Highlighted when the line is designated with the joystick pointer. The boundary label will be “FIR”, “UIR” or “F/U” as appropriate for the airspace type.
Appendix A ICONS R8 3/6/07 11:27 AM Page 3 Feature Conditions Icon / Colors Airspace Boundary Prohibited Yellow Yellow and and black black dashed line with dashed line black on white with black on label white label May be enabled or disabled based on Map Setup page (4) setting. Highlighted when the line is designated with the joystick pointer. The boundary label will be “PHB”.
Appendix A ICONS R8 3/6/07 11:27 AM Page 4 Feature Conditions TOPO on TOPO off Obstacles Lighted Tall Black icon with white on black label Cyan icon with white on black label Lighted Short Black icon with white on black label Cyan icon with white on black label Unlighted Tall Black icon with white on black label Cyan icon with white on black label Unlighted Short Black icon with white on black label Cyan icon with white on black label Black icon with white on black label Green icon with
Appendix A ICONS R8 Feature 3/6/07 11:27 AM Conditions Page 5 Icon / Colors TOPO on TOPO off Other Characteristics Airports Soft or unknown runways Outline black circle with line representing primary runway and white on black label Outline cyan circle with cyan line representing primary runway and white on black label Airport Runways Primary, hard surface Thick black line with white on black label at each end Thick white line with white on black label at each end Other hard surface Primary
Appendix A ICONS R8 Feature 3/6/07 11:27 AM Conditions Visual Reference Points Page 6 Icon / Colors TOPO on TOPO off Black on white with white on black label Not displayed Other Characteristics Will be enabled or disabled based on Map Setup page (2) setting. The label will indicate the VRP name. Highlighted when the icon is designated with the joystick pointer. The following shows the various icons that may be seen in the functions legend, which is displayed in the lower left of the display.
Appendix A ICONS R8 Icon 3/6/07 11:27 AM Page 7 Colors Description Black on cyan Traffic sensor in standby mode being displayed. Black on cyan Active traffic information being displayed. Black on gray Traffic sensor in standby mode, not being displayed. Black on yellow TIS service not available. Black on gray Traffic sensor active, not being displayed. Black on gray with red Traffic sensor data invalid / not being displayed.
Appendix A ICONS R8 VDL Icon 3/6/07 XM Icon Rev 8 Mar/2007 11:27 AM Page 8 Colors Description Black on a cyan background. No weather data is currently being received but previously received data is being displayed on the present page. Black on a cyan background. Weather data is currently being received from a signal and displayed on the present page. XM signal is weak. Black on a cyan background. Weather data is currently being received from a signal and displayed on the present page.
Cover 3/6/07 11:08 AM Page 3 Honeywell Aerospace Business and General Aviation Honeywell International Inc. One Technology Center 23500 West 105th Street Olathe, KS 66061 Telephone: (913) 712-0400 FAX: (913) 712-1302 www.honeywell.com 006-18222-0000 Rev. 8 3/07 © 2000-2005, 2007 Honeywell International Inc.