HMLCD19 19-inch LCD Monitor User Manual Video Systems www.honeywellvideo.com 1-800-796-CCTV © 2004 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell Video Systems. The information in this publication is believed to be accurate in all respects. However, Honeywell Video Systems cannot assume responsibility for any consequences resulting from the use thereof.
ISSUE DATE A April 2004 SECTION 5: SPECIFICATIONS REVISIONS Initial Release (PCN 1632) LCD Type Screen Size PC Input Signal Type H-Freq Sync V-Freq Display Color Resolution Video Band Width OSD Controls Power Management Power Consumption Plug & Play Speaker TFT Color 19” (diagonal) RGB Analog 15-Pin D-Sub 31.
4.4 LIMITED WARRANTY FCC COMPLIANCE STATEMENT Honeywell International Inc. ("Seller"), 1305 Waters Ridge Drive, Lewisville, TX 75057, warrants this monitor to be in conformance with its own plans and specifications and to be free from defects in materials and workmanship under normal use and service for a period of up to one (1) year from the date of manufacture.
SECTION 4: TROUBLESHOOTING AND MAINTENANCE EXPLANATION OF GRAPHICAL SYMBOLS 4.1 The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3.4 Step 1: Step 2: GETTING OPTIMAL PICTURE Window’s background or “H” character should be displayed on your screen. WARNINGS • Adjust the screen to the center of the Display (LCD) by using the top and bottom display controls and the V-Position Adjust menu. Installation and servicing should be performed only by qualified and experienced personnel. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
3.3 SAFEGUARDS, CONTINUED Using HOTKEY ENVIRONMENT/INSTALLATION WARNINGS 2. Do not place candlelight, mosquito coils, or cigarettes on top of the monitor or install it close to heating appliances. Doing so may damage the product or create a fire danger. The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. 3. Do not place this product on an unstable cart, stand, tripod, bracket, or table.
3.3 ON-SCREEN DISPLAY (OSD) CONTROL PROCEDURE, CONTINUED SAFEGUARDS, CONTINUED CLEANING AND GENERAL USAGE OSD Menu Description OSD Horizontal position Select OSD MENU horizontal position. Vertical position Select OSD MENU vertical position. Timeout Time after which OSD MENU leaves screen. Transparency Adjust the transparency of the OSD Menu. Language English French German Select one of the five languages. Italian Spanish Advanced Factory Preset Audio Input Select Video Rev. A 1.
3.3 PURCHASE INFORMATION ON-SCREEN DISPLAY (OSD) CONTROL PROCEDURE, CONTINUED OSD Menu Description Date Purchased: The following table describes the OSD menu and a description of each option. Serial Number: Location Installed: OSD Menu Description Picture Auto adjustment Automatically adjusts the Horizontal position, Vertical position, horizontal size and Phase. Windows background or characters should be displayed on the full screen prior to processing this function.
3.3 ON-SCREEN DISPLAY (OSD) CONTROL PROCEDURE TABLE OF CONTENTS Image and sound can easily be adjusted through an OSD menu. SECTION 1: INTRODUCTION .................................................. 1 1.1 INTRODUCTION ............................................................. 1 1.2 FEATURES ...................................................................... 1 1.3 CONTENTS OF PACKAGE ............................................. 3 SECTION 2: CONTROLS AND CONNECTIONS .....................
3.2 TABLE OF CONTENTS, CONTINUED PRESET MODE CHART, CONTINUED Timing Charts SECTION 4: TROUBLESHOOTING AND MAINTENANCE.... 19 4.1 TROUBLESHOOTING ................................................... 19 No Power..................................................................... 19 Poor Picture Quality..................................................... 19 4.2 MAINTENANCE............................................................. 19 4.3 SERVICE AND SUPPORT .........................................
3.2 SECTION 1: INTRODUCTION PRESET MODE CHART 1.1 Timing Charts The monitor shall be capable of supporting the following video timings: VIDEO Honeywell's HMLCD19 SXGA Color LCD Display features a 19" viewable active matrix LCD screen, with outstanding 1280 x 1024 pixel resolution. When used in PC based applications the HMLCD19 provides connection points for VGA, PC Sound, and Headphones.
SECTION 3: OPERATION Some computer systems are not compatible with the DDC standard. If your monitor is displaying the wrong resolution, check your computer system for a DDC compatible video card and contact the Service Center. 3.1 POWER MANAGEMENT This monitor is equipped with DPMS (Display Power Management Signaling) function which automatically switches to power saving mode (less than 5 watts consumed) when the computer is left unattended.
NOTES: 1.3 CONTENTS OF PACKAGE LCD Monitor User Manual VGA Cable USER MANU AL Sound Cable AC/DC Adapter Installation Disk Power Cord Video Sound Cable Composite Cable BNC to RCA Adapters (2) OPTIONAL ACCESSORIES: S-video cable, Wall Mount adapter (VESA standard) Rev. A 10 HMMU000882 04/09/04 Rev.
NOTES: 2.6 DISPLAY MODES MEMORY The microcontroller has memory capacity to store 27 different display modes including timing formats and display settings. This memory capacity is divided into two parts: user setting area and factory presetting area. User Setting Area The user can add non-standard modes. If display image is adjusted, the image is saved automatically, then when the microcontroller is turned on it detects and displays the last mode stored in the user setting area.
2.5 SECTION 2: CONTROLS AND CONNECTIONS MICROCONTROLLER FEATURES The microcontroller automatically detects the video board installed in your system. When the monitor is turned on, the microcontroller first checks the display mode memory stored in the user setting area and the factory presetting area. 2.1 CONTROLS – FRONT PANEL A B C D E F G Rev. A 8 HMMU000882 04/09/04 Rev.
2.2 CONTROLS – REAR PANEL A C B D 2.3 E F INSTALLING THE MONITOR DRIVER You can achieve an optimal resolution and scanning rate by installing the monitor driver as follows: G 1. Insert the monitor driver diskette into the floppy diskette drive and run INSTALL.EXE. 2. Select the monitor model then press OK. The installation will begin immediately. 2.4 VGA CABLE A 15-pin D-Sub connector is used as the input signal connector. Pin and input signal are shown in the table below.