HCD92534 True Day/Night IR Camera NTSC PAL HCD92534 HCD92534X User Guide Document 900.
Revisions Issue Date Revisions A 04/07 New document 2
Warnings Installation and servicing should be performed only by qualified and experienced personnel to conform to all local codes and to maintain your warranty. WARNING! 12 VDC/24 VAC models require the use of CSA Certified/UL Listed Class 2 power adapters to ensure compliance with electrical safety standards. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
FCC Compliance Statement Information to the User: This equipment has been tested and found to comply with the limits for a Class A digital device. Pursuant to Part 15 of the FCC Rules, these limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Precautions • • • • • • • Please ensure that your installation area can support the weight of the camera. Do not install the camera in extreme temperature conditions. Only use the camera where temperatures are between -13°F and 122°F (-25°C and 50°C). Be especially careful to provide ventilation when operating under high temperatures. Do not aim the camera towards an extreme light source to prevent damaging the CCD. Do not touch the camera bezel (front glass plate).
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unpack Everything . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 8 9 9 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction The Honeywell HCD92534 Color IR camera is designed for exceptional value and performance and is ideally suited for use in day-to-day surveillance applications. The off-the-shelf feature set is designed for high picture quality in standard applications and the HCD92534 requires little to no adjustment after installation. Figure 1 Camera Overview Sunshield IR LED Lens adjustment Camera settings (behind access cover) 2.
Before You Begin Please read this guide carefully before you install the HCD92534 True Day/Night camera. Keep this guide for future reference. Unpack Everything Check that the items received match those listed on the order form and packing slip.
Installation The HCD92534 camera is designed for installation on a wall or ceiling. The HCD92534 is weather sealed for indoor or outdoor locations. Attaching the Camera 1. 2. 3. Position the camera to the desired mounting location on a wall or ceiling. Be sure the location is solid on a flat, smooth surface (for example, a crossbeam). Using the supplied mounting template, mark the four screw holes for installation. Use four screws appropriate to your installation, screw the camera to the marked holes.
Lens Setup Adjusting the Zoom and Focus of the Lens The zoom and focus adjustment is accessible at the underside front end of the camera housing. Figure 2 Lens Controller Focus adjustment screw F Z Zoom adjustment screw Use a flathead screwdriver to adjust the zoom and/or focus. To adjust the focus turn the focus screw counter-clockwise for near focus and clockwise for far. Turn the zoom screw counter-clockwise for wide-angle and clockwise for telephoto. Document 900.
Camera Settings Camera Functions Figure 3 Camera Controller VIDEO-TEST 1 ON LUX LEVEL 1 STEP UP 4 LEFT RIGHT 2 STEP DOWN 3 SETUP (MENU) PUSH DOWN 3 STEP LED-LEVEL 4 STEP 2 Legend # Description 1 Video-test monitor output connector 2 LUX-level adjustment DIP switches. Only one switch should be on at a time. They modify the point at which the lux threshold (level of light) changes the mode of operation (color or B/W).
Connecting the Camera 1. 2. Connect the BNC video output connector to the video-in connector on your monitor or video recorder. Connect the camera to a power supply appropriate for your installation (12 VDC or 24 VAC). Document 900.
Programming OSD Menu Structure The HCD92534 menu system consists of one main SETUP MENU (see Figure 4) for easy camera programming. Press down on the SETUP (MENU) control (see Figure 3) to display the SETUP menu. Figure 4 1 2 3 4 5 6 7 8 9 Menu Structure <> LENS DC! SHUTTER ––– WHITE BAL. ATW BACKLIGHT OFF AGC MIDDLE! DNR MIDDLE DSS OFF SPECIAL! EXIT MENU SETUP MENU ! indicates submenus SETUP MENU LENS DC! , VIDEO, MANUAL SHUTTER FLK, ESC! , MANUAL WHITE BAL.
SETUP Menu Functions Menu Item Option Description 1 LENS DC! VIDEO MANUAL Selects Lens type (the HCD92534 only supports DC mode at this time; choosing any other mode may cause incorrect/unpredictable camera operation). 2 SHUTTER FLK Adjusts shutter settings. ESC! MANUAL Flickerless mode (FLK) reduces on-screen flickering. Electronic Shutter Control (ESC) adjusts brightness level on screen.
SPECIAL Menu 1. On the SETUP menu, press the menu control UP or DOWN and then select SPECIAL. Press the SETUP (MENU) control to access the SPECIAL menu. 2.
SPECIAL Menu Functions Option Description 1 CAMERA ID Menu Item OFF ON! Sets a name to be displayed on the monitor. See Adding a Camera Title Display. 2 COLOR AUTO ON Sets the camera to either automatic color/black and white or full-time color mode. 3 SYNC INT Synchronizes the vertical interval sync pulse of your camera with other equipment to reduce the effect of picture roll on the monitor. L/L! In Line Lock (L/L) mode you can adjust the phase from 0–270°.
2. 3. 4. 5. Press the menu control UP, DOWN, LEFT, or RIGHT to select a character, then press SETUP (MENU) to accept it. The character is saved and the title cursor at the bottom of the screen moves to the next position. You can use the " $ symbols to go back or forward in the title name to make changes, and you can also select CLR to delete the entire title and start again. Repeat step 2 until your camera title is complete.
Motion Detection Setup Set up to four areas of the screen to detect moving objects. The screen will display MOTION DETECTED along with the number of movements counted. Figure 8 Motion Detection Setup MOTION DETECTION AREA SEL AREA STATE TOP DOWN LEFT RIGHT AREA 1 ON |..|................| 10 |........|..........| 25 |...|...............| 20 |........|..........
Privacy Mode Setup Set up to four areas of the screen for privacy mode (that is, the camera will not record video in these areas). Figure 9 Privacy Mode Setup PRIVACY AREA SEL AREA STATE AREA TONE TOP DOWN LEFT RIGHT AREA 1 ON |...............|...| 80 |..|................| 10 |........|..........| 25 |...|...............| 20 |........|..........
Warranty and Service Subject to the terms and conditions listed on the Product warranty, during the warranty period Honeywell will repair or replace, at its sole option, free of charge, any defective product returned prepaid. In the event you have a problem with any Honeywell product, please call Customer Service at 1.800.796.CCTV (North America only) for assistance or to request a Return Merchandise Authorization (RMA) number. For Europe and the United Kingdom, please contact your Honeywell dealer.
HCD92534 (NTSC) IR LEDs HCD92534X (PAL) 850 nm, 49 LEDs IR Illumination Distance 75 ft (24 m)–110 ft (33.5 m), depending on scene reflectivity Digital Noise Reduction Off/Low/Middle/High Digital Slow Shutter Electrical Input Voltage Input Range Surge Suppression Power Consumption Mechanical Dimensions Weight: Construction x2–x128 12 VDC/24 VAC 11–16 VDC, 17–28 VAC 1.5 kW transient 15 W (max) with IR LEDs on See diagram on next page 2.8 lb (1.
Mounting Template Figure 10 Mounting Template Scale 1:1 Mounting screw holes (8/32 inch diameter) See “Attaching the Camera” on page 10 for information on using the mounting template. Note The camera enclosure should be mounted on a flat, smooth surface. Document 900.
Honeywell Video Systems (Head Office) 2700 Blankenbaker Pkwy, Suite 150 Louisville, KY 40299, USA www.honeywellvideo.com ℡ +1.800.796.2288 Honeywell Video Systems Northern Europe Netwerk 121 1446 WV Purmerend, The Netherlands www.SecurityHouse.nl ℡ +31.299.410.200 Honeywell Security Australia Pty Ltd. Unit 5, Riverside Centre, 24-28 River Road West Parramatta, NSW 2150, Australia www.ademco.com.au ℡ +61.2.8837.9300 Honeywell Video Systems UK Ltd.
