User Manual

AIR QUALITY MONITOR

Sensing and Internet of Things

sensing.honeywell.com/haq

Step 1. Use microUSB cable to charge

device.

Step 2. Turn the device on by pressing

and holding start button on

top for 5 seconds.

Step 3. Download and install the

Honeywell IAQ smartphone

app using QR code, or directly

from App Store.

iOS Android

Step 4. Connect your smartphone

to the WiFi. Launch app and

follow instructions to connect

the device.

PAGE 1
AIR QUALITY MONITOR Sensing and Internet of Things sensing.honeywell.com/haq Step 1. Use microUSB cable to charge device. Step 2. Turn the device on by pressing and holding start button on top for 5 seconds. Step 3. Download and install the Honeywell IAQ smartphone app using QR code, or directly from App Store. Step 4. Connect your smartphone to the WiFi. Launch app and follow instructions to connect the device.
PAGE 2
Attention • • • • The device should be charged for 24 hours continuously the first time you use it so that it can be initialized. As a protective measure, the powered off device will continue to provide a weak current to the sensor. Even if fully charged, the device will drain the power if it is not used for a long period of time and must be recharged before being used again. When charged, the device will have a slightly higher temperature even at a low power level.