Quick Start Guide
手持電腦
快速入門指導
手持電腦
主電池(3.8V,鋰離子電池)
監管表
備註:
如果您訂購了終端配件,請確保它們也包含在包裝中; 請務必保留ScanPal EDA71
的原始包裝,以便在必要時返回進行維修
TM
註意:
最終用戶不應隨意將操作系統替換為其他操作系統。 要更新設備上安裝的操作系統,
您需要從操作系統供應商處獲得許可。
系列
TM
ScanPal
TM
EDA71-0/EDA71-1 屬於 ScanPal
系列
前面板
後面板
電源指示燈
麥克風
掃描指示燈
顯示屏
電池蓋安全鎖
揚聲器
掃描引擎
相機
電池蓋安全按鈕
腕帶卡槽
電池蓋摳手
電池蓋
NFC 區域
左側面
右側面
電源键
音量+
音量-
掃描键
8pin充電觸點
掃描键
用錯誤的型號更換電池可能會導致爆炸。請確保按照當地法規使用電池。請盡可能回收電池。
請勿將其作為生活垃圾處理。將移動設備或電池連接到外部設備時,請確保所有套件幹燥。
連接濕套件造成的損壞不在保修範圍內。
底部
安裝主電池
ScanPal EDA71在單獨的包裝中附帶電池。
TM
請按照以下步驟安裝電池:
按下電池蓋安全按鈕,將電池蓋安全鎖移至右側的解鎖位置 ;
從電池蓋摳手處打開電池蓋;
插入電池(首先插入非連接器側,然後向下按電池以建立電池和電話之間的連接)
按下電池蓋(首先插入非連接器側,然後按下電池蓋)
按下電池蓋安全按鈕,將電池蓋安全鎖移至左側的鎖定位置。
同步通信
備註:
請參閱下頁的插圖安裝步驟。
充電/同步
將ScanPal EDA71插入USB cup或single cradle。
將USB cup或single cradle連接到計算機。
TM
TM
ScanPal Series
Enterprise Hybrid Device (EHD)
EDA71-0
EDA71-1
Quick Start Guide
EDA71-SC-QS Rev A
·
ScanPal
TM
Enterprise Hybrid Device ;
·
Main battery (3.8V, lithium ion battery);
·
Regulator sheet.
Remarks:
If you ordered accessories for the terminal, please make sure they are
also included in the package; be sure to keep the original packages for
TM
ScanPal EDA71 to be returned for repairing when necessary.
Note:
End users should not arbitrarily replace the operating system with other
operating systems. To update operating system installed on your device,
you need to get license from the OS vendors.
TM
EDA71-0/EDA71-1 belongs to ScanPal Series
Front Panel
Power Indicator
Scan Indicator
Display
Microphone
Rear Panel
Camera
Scan Engine
Speaker
Battery Cover Safety
Lock
Battery Cover Safety
Button
Battery Cover Buckle
Handle
Battery Cover
String Buckle
Left Side View
The Bottom
Right Side View
Power Button
Volume Up
Volume Down
Scan Button
8 Pin I/O Connect
Scan Button
Install the Main Battery
Replace the battery with wrong models may cause explosion. Please
make sure to use the battery in accordance with local regulations.
Please recycle the battery when possible.
Do not dispose it as household waste
Please ensure all kits are dry when connect the mobile device or battery
to external devices.
Damages caused by connecting wet kits are not covered by the
warranty.
1. Press down the battery cover safety button to move the battery cover
safety lock to the unlock position at right;
2. Open the battery cover with the battery cover buckle handle ;
3. Insert the battery (Insert the non-connector side first, then press the
battery down to establish connection between the battery and the
phone)
4. Press down the battery cover (Insert the non-connector side first,
then press the battery cover down)
5. Press down the battery cover safety button to move the battery cover
safety lock to the lock position at left
Remarks:
Refer to the illustrated installation steps on the following page.
ScanPal
TM
EDA71 comes with a battery in a separate package.
Please follow the steps below to install the battery.
Charging / Sync
Synchronous Communication
TM
Insert the ScanPal EDA71 to the USB cup(or the single cradle).
Connect the USB cup(or the single cradle) to the computer.
USB Cup
NFC ant area
Single cradle