Honeywell Hon660 - Android Upgrade User Guide Document Information Info Content Author(s) Cathy Chen Revision 1.1 Document Status Draft Date 11/8/2017 Distribution Internal use only VPM Number [VPM Number] Keywords [Keywords] Copyright © 2017 Honeywell. All rights reserved. This document contains proprietary information of Honeywell and is protected by copyright and other international laws.
Download Guide – Dubai Android Revision History Rev.
Download Guide – Dubai Android Revision History....................................................................................................................................................... 2 1 Preparation ....................................................................................................................................................... 4 1.1 1.2 1.3 2 OTA Upgrade for Hon660 .......................................................................................................
Download Guide – Dubai Android 1 Preparation 1.1 USB driver install This section is required for QFIL to Upgrade. If the USB driver is ready for you ,Please skip this section . Otherwise you need to install the USB driver first. Please get the driver package from the below correct link . Driver Packages Qualcomm USB Drivers For Windows : GoogleAndroidUSBDevice: USB driver\qud.win.1.1_installer_10044.7\Setup.exe USB driver\google\usb_driver\dpinst-amd64.exe SZ: \\ch3uw1050\Engineer\Mobility\Proje
Download Guide – Dubai Android 1.2 Identify device’s SOM SDA vs SDM When you Upgrade the OS version with QFIL ,This section is required. Please notice this device’s SOM type. If the number marked in red in below picture is 0, the SOM type is SDA. If the number is 1, the SOM type is SDM. Examples for CN80: Examples for CT60: 1.3 USB Cable USB 2.0 complaint cable is required. USB 3.0 complaint cable may not work (for CN80) Copyright © 2017 Honeywell. All rights reserved.
Download Guide – Dubai Android 2 OTA Upgrade for Hon660 This section introduces how to upgrade with OTA method. Including The OTA image position, USB connection way, Where is OTA package, Hupgrader.apk operation steps. How to Upgrade between Honeywell Key and Test key. Notes : OTA support One image for CN80 & CT60. Please make sure the current version is newer version. If The OS version is older version, Please QFIL with 83.00.00(0288) version. Refer to Chapter 3 Program with QFIL From 83/84.00.
Download Guide – Dubai Android 2.2 Connect the device to PC Please notice the different connection method for CN80 & CT60. For CN80: Connect the device to PC follow the method below via a USB 2.0 cable.. For CT60: Connect the device to PC follow the below method. (CT60 support two Base see below picture) Copyright © 2017 Honeywell. All rights reserved.
Download Guide – Dubai Android 2.3 Copy OTA package to specified folder 1 、Choose the USB as transfer files mode 2 、Open device to View files You can copy the OTA package into the Internal Sdcard Or IPSM card. It’s optional for you. Take below operation copy OTA package to “Internal Scard/Download” as example. Copyright © 2017 Honeywell. All rights reserved.
Download Guide – Dubai Android 3 、Open the Download folder. The Hupgrader.apk will search ota zip from this floder default. 4 、Copy the ota zip to the Download Copyright © 2017 Honeywell. All rights reserved.
Download Guide – Dubai Android 2.4 OTA Upgrade By Hupgrader Hugrader.apk Can select the OTA zip By Filebrower. (From Internel Sdcard or IPSM) 1 、Double click the HUpgrader.apk to show the HUpgrader main interface as second picture. 2 、Select the OTA zip which you want to Upgrade from storage. Below Second Picture Select From sdcard/Download/ folder. Below Third Picture also can select from IPSM(Marked red) Copyright © 2017 Honeywell. All rights reserved.
Download Guide – Dubai Android 3 、need wait moment after the OTA package then start to Installing OTA see picture two marked. 4 、reach the hundred percent need to Reboot the devices and enter into new Upgraded OS version. Click the OK button. It will be take effect. Copyright © 2017 Honeywell. All rights reserved.
Download Guide – Dubai Android 2.5 How to switch OS With OTA Between Honeywell Key and Test Key What kind of OTA zip is Honeywell release Key signed: 83/84.00.00(0310) user build or later What kind of OTA zip is Google Test Key signed: All image except Honeywell release Key singned The G2H.zip & H2G.zip Position: SZ: http://artifactory.android.honeywell.com:8080/artifactory/libs-snapshotlocal/Honeywell/Hon660Android/nougat-master/PILOT/00.00.00(0056)/HON660-N-00.00.00D(0056)-H2G.
Download Guide – Dubai Android 3 Program with QFIL (Qualcomm Flash Image Load) This section introduces how to upgrade with QFIL method. Including QPST install & use, QFIL image position, How to enter QLOADER mode , QPST flash method. The USB 2.0 Cable connection is required , Please Use the USB 2.0 to program with QFIL for CN80 3.1 Install QPST 3.1.1 QPST Installer Location The installation package name is qpst.win.2.7_installer_00458.1.zip. SZ: \\ch3uw1050\Engineer\Mobility\Projects\DubaiAndro
Download Guide – Dubai Android 3. After rebooting the computer, relaunch the setup program by double-clicking the setup.exe file. When the Setup Complete dialog appears, the application has been installed successfully. 4. Click Finish to complete the installation. 3.2 Device SOM Type At moment, there are two SOM types for Hon660 device, that is SDM and SDA. Unplug the battery, you will see the PN on the white sticky.
Download Guide – Dubai Android 2 、Only for CN80 SZ: 3 http://artifactory.android.honeywell.com:8080/artifactory/libs-snapshotlocal/Honeywell/CN80Android/nougat-master/QFIL/ US: \\de08st2702\hsm\ENG-MOB-SWImages\DubaiAndroid\Nightly_Builds\CN80Android\nougat-master\QFIL USI: sftp://Dubai@sftp.usi.com.tw:/Honeywell/CN80Android/nougat-master/QFIL/ 、Only for CT60 SZ: http://artifactory.android.honeywell.com:8080/artifactory/libs-snapshotlocal/Honeywell/CT60Android/nougat-master/QFIL/ US: \\de08
Download Guide – Dubai Android For CN80: 1. Connect IO Port to the device. 2. Unplug the battery, you will see the black rubber cushion 3. Unplug the black rubber cushion. Short the right two pins (marked in red in above right picture) , connect the USB from IO port to host computer to make device enter QLOADER mode. Copyright © 2017 Honeywell. All rights reserved.
Download Guide – Dubai Android For CT60: 、 1 Unplug the battery && Connect the Base to the devices Two Base for CT60 see below picture. 、 2 Short the right two pins (marked in red in below right picture) , connect the USB from base to host computer to make device enter QLOADER mode. Copyright © 2017 Honeywell. All rights reserved.
Download Guide – Dubai Android 3.3.3 Use QFIL to download Flat Build image 1. Plug in a target device in QLOADER mode to an available USB port. The device is displayed at the top of the main screen. If the port is not automatically detected, click Select Port. Select the applicable device and click OK. If no ports are displayed in the Select Port dialog, check if device is in QLOADER mode. Check device Develop Options =>Select USB Configuration if Qualcomm com port still not showing up in QFIL selection.
Download Guide – Dubai Android 2. Click BROWSE to load the prog_emmc_ufs_firehose_Sdm660_ddr.elf file. Browse to the flat build location and select prog_emmc_ufs_firehose_Sdm660_ddr.elf. Click Open. 3 Click Load XML to load rawprogram_unsparse.xml and patch0.xml. Browse to the flat build location and select rawprogram_unsparse.xml according to your device SOM type. If your SOM type is SDA, please choose rawprogram_unsparse_SDA660.xml. If SDM, choose rawprogram_unsparse_SDM660.xml. Refer to Section 3.
Download Guide – Dubai Android Browse to the flat build location and select patch0.xml. Click Open. 4. Click Download to start the download. During download, all of the function buttons are dimmed and will be reenabled after downloading is complete. The download progress is indicated by the horizontal progress bar. The Status field displays the updated files and the images currently being programmed into the target device. Copyright © 2017 Honeywell. All rights reserved.
Download Guide – Dubai Android 4. When the download has completed successfully, Download Succeed and Finish Download messages display in the Status field. Copyright © 2017 Honeywell. All rights reserved.
Download Guide – Dubai Android 4 How to Check the md5sum This section introduces why do we need to check md5sum and how to check. 4.1 Why do check Sometimes User will meet OTA Upgrade failed or even if the upgrade process is successful but The device can’t boot into the New OS version and back to the original OS version after 7 times reboot. If that happens, Please check the md5sum first. Check the OTA package copy to the device is correct.
Download Guide – Dubai Android 5 How to Resolve Encrypting problem Phenomenon : Recovery Device hang at encryption screen Case 1: Curent version is user Please use the QFIL method Update the OS version QFIL method Refer to the steps : Chapter 3 Program with QFIL Case 2: Current version is userdebug Please enter the recovery mode.
Download Guide – Dubai Android 6 How to do Factory Reset Step1: Long press “power” button to reboot device Step2: When the right up corner green light is on press “power” + “volume down” Step3: The device will enter boot menu Step4: Select “Factory Reset” and press “power” key then device do the factory reset then reboot into the OS. Copyright © 2017 Honeywell. All rights reserved.
Download Guide – Dubai Android 7 How to erase ddr partition to fix ddr issues Method 1: QFIL with 83.00.00(0288) version . refer to the chapter 3 steps Method 2: Step1: Upgrade to the newest userdebug version refer to the chapter 2 Step2: adb reboot bootloader && fastboot erase ddr Step3: fastboot reboot Copyright © 2017 Honeywell. All rights reserved.
Download Guide – Dubai Android 8 ADB Use(Common) adb is a versatile command-line tool that lets you communicate with a device (an emulator or a connected Android device). The adb command facilitates a variety of device actions, such as installing and debugging apps, and it provides access to a Unix shell that you can use to run a variety of commands on a device.
Download Guide – Dubai Android 9 Appendix A – Tools Installation 9.1 Visual C++ Run-Tim Libraries Installation Run Setup.exe from the extracted qpst.win.2.7_installer_004581.zip. Click “Install” to start installation Installation in progress… Select “Repair Microsoft Visual…” then click “Next” Installation in progress… Copyright © 2017 Honeywell. All rights reserved.
Download Guide – Dubai Android 9.2 QPST 2.7x Installation Run QPST.2.7.458.msi from the extracted qpst.win.2.7_installer_004581.zip. Click “Next” to begin installation of QPST 2.7 Select “Agree” then click on “Next” Select “Everyone” then click “Next” Click “Next” to confirm installation Installation in progress… Click “Close” to complete installation of QPST 2.7 Copyright © 2017 Honeywell. All rights reserved.
Download Guide – Dubai Android 9.3 1 USB Drivers 、Run Setup.exe from extracted qud.win.1.1_installer_10040.5.zip Double click on “Setup.exe” to start the installation Select “ETHERNET-DHCP is used to get IPAdress” [Note: selecting the WWAN option would not work] Click “Next” 2 Accept terms and click “Next” 、 Run dpinst-amd64.exe in USB driver\google\usb_driver Click “Next” Click “Next” Copyright © 2017 Honeywell. All rights reserved.
Download Guide – Dubai Android Waiting for Installing.. Click “Install driver software anyway” Completed it. Copyright © 2017 Honeywell. All rights reserved.
Download Guide – Dubai Android 9.4 OTA Version Format Define 9.4.1 Version Format ... 9.4.2 The will be a number assigned to a specific platform version. This will typically be a combination of the hardware architecture and OEM OS software. This number should change whenever there are changes to the underlying architectures. Please refer to Error! Reference source not found. for definitions of the platform identifiers.