Dolphin™ CT60 powered by Android™ Quick Start Guide CT60-A-EN-QS-02 Rev A 5/20
Out of the Box Make sure that your shipping box contains these items: • Dolphin CT60 mobile computer (Model CT60L0N or CT60L1N) • Rechargeable 3.85 VDC Li-ion battery • Product documentation If you ordered accessories for your mobile computer, verify that they are also included with the order. Be sure to keep the original packaging in case you need to return the mobile computer for service. Note: CT60L0N models do not include a WWAN radio.
Mobile Computer Features Speaker Power Button Good Read LED Scan Buttons Battery Status / Notification LED Touch Panel Volume Buttons Navigation Panel * Microphone *Navigation Panel icons may vary depending on the unit type.
Note: Hand strap not shown.
Install a microSD Card (SD) Note: Format the microSD card before initial use. 1 2 3 4 5 Note: Always power off the computer and remove the battery before attempting to install or remove a card.
Install a microSIM Card (SIM 1) Phone feature is available only on CT60L1N models. On all models, when using a UICC card for NFC Secure Element link encryption, install the card in SIM slot 1. 1 2 3 4 5 Note: Always power off the computer and remove the battery before attempting to install or remove a card.
Install a Secondary microSIM Card (SIM 2) Note: Feature available on CT60L1N Models only. 1 2 3 4 5 Note: Always power off the computer and remove the battery before attempting to install or remove a card.
Install the Battery The CT60 mobile computer ships with a Li-ion 3.85 VDC, 15.5 watt-hour battery manufactured for Honeywell International Inc.
Ensure all components are dry prior to placing the battery in the computer. Mating wet components may cause damage not covered by the warranty. Assurez-vous que tous les composants sont secs avant de placer la batterie dans l’ordinateur. L’insertion de composants humides risque de provoquer des dommages non couverts par la garantie. Charge the Mobile Computer The CT60 mobile computer ships with a partially charged battery. Charge the battery with a CT50 Series charging device for a minimum of 4 hours.
Ensure all components are dry prior to mating the computers and batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty. Mise en garde: Assurez-vous que tous les composants sont secs avant de connecter les terminaux/batteries à des périphériques. L'insertion de composants humides risque de provoquer des dommages non couverts par la garantie. We recommend use of Honeywell Li-ion battery packs.
Turn Power On/Off The first time you power on the computer, a Welcome screen appears. You can either scan a configuration bar code or use the Wizard to manually set up the computer. Once setup is complete, the Welcome screen no longer appears on startup and Provisioning mode is automatically turned off (disabled). To turn the computer on: • Press and hold the Power button for approximately 3 seconds, and then release. To turn the computer off: 1.
3. Once you replace the battery, press the Power button. Sleep Mode Sleep mode automatically turns the touch panel display off and locks the computer to save battery power when the computer is inactive for a programmed period of time. 1. Press and release the Power button to wake the computer. 2. Drag the computer. toward the top of the display to unlock the Adjust the Display Sleep Time To adjust the amount of time before the display sleeps after inactivity: 1.
About the Home Screen Notification / Status Bar Home Screen Panel Favorites Tray Search Bar To learn how to customize the Home screen, see the user guide.
Navigation and Function Buttons Button Description Back Return to the previous screen. Recent Apps View and switch between recently used apps. Home Return to the Home screen. Search Start a search on the computer or the Internet. Volume Raise or lower the volume of the speaker. Scan Press right or left scan button to trigger the scanner. Camera Press to open the camera app and take a photo. or or or To learn more about how to remap a button, see the user guide.
About Provisioning Mode After completing the out-of-box set up process, Provisioning mode is automatically turned off. Scanning a bar code to install applications, certificates, configuration files, and licenses on the computer is restricted unless you enable Provisioning mode in the Settings app. To learn more, see the user guide. Scan a Bar Code with the Scan Demo Note: For optimum performance, avoid reflections by scanning the bar code at a slight angle. 1.
The decode results appear on the screen. Note: In the Scan Demo app, not all bar code symbologies are enabled by default. If a bar code does not scan, the correct symbology may not be enabled. To learn how to modify the default app settings, see the user guide. Sync Data To move files between your CT60 and a computer: 1. Connect the CT60 to your computer using a USB charge/ communication accessory. 2. On the CT60, swipe down from the top of the screen to see the notifications panel. 3.
Restart the Mobile Computer You may need to restart the mobile computer to correct conditions where an application stops responding to the system or the computer seems to be locked up. 1. Press and hold the Power button until the options menu appears. 2. Select Reboot. To restart the computer if the touch panel display is unresponsive: • Press and hold the Power button for approximately 8 seconds until the computer restarts.
Patents For patent information, see www.hsmpats.com. Trademarks Android is a trademark of Google LLC. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.