[3 TG CP980C, D,E and F Velocity Velocity Sensor-Controller Installation Instructions Before Installation “The CPU Necrology Sensor-controlling Combines amid.
Installation Before stalling Ue sorer, Be certain that the proper flow Linton orifice accompanies the season, se Table 1.18 an artifice is added in the field, insert the large opening end into he sampling tbe of the sensor. A rib on the orifice aligns with 2 groove in the season: Ash the orifice nits the tissue until if: snaps ito place See Big 1 CAUTION Tempura 0 remove an orifice ny result in orifice damage, “Hale 1. Sensor Velocity Rating.
=H FEATURE. CHARACTERISTIC SED MODEL CLEARANCE San lean) hoa 8 ELF TARP 1 ess GE ° PHEROMONE AIR. CONNECTOR FOR S220 Amen PLASTIC TUBING =) [RE be] Fag. 2 Approximate Sensor: Dimensions in Inches (um).
FABRICATED: BRACKET HEIGHT VARIES “WITH DUCT 4x4" BOX PLATE BOTTOM VIEW =: Fig. 4. Field Mounting: Mounting Controller (Refer to Fig. 5.) Mount the controller by using the two mounting: slots af the the sensor. Mount the controller such that dials are easily read controllable steed for No. 8 screws; The controller can be and adjustable. See Fig: 3 and 4 for typical examples.
oat SCREW SERIAL ND. | CRIB OX 99901 171 | 55808 | comforter |] | : FORLORN. DAMPER F Nonrecognition OWE PORT PORT B-. | [T0 SENSOR | FORT B) CJ PORT 3 1 {TO THERMOSTAT) Did. 578 {73 Dae 29m IZ CLEARANCE FOR #6 SCREW NOTE PORT IIS SIZED FOR 14 INCH (6mm) TUBING. ALL OTHER CONNECTIONS ‘ARE SIZED FOR 5/32 INCH (Amm) TURING ize Hig. 5. Approximate Controller Dimensions in Tokes (mm).
Piping (See Fig. 6.) Al somatic connections on the transcontinental are sharp bar type: The season has twa S52-4nch (4 mim connections. math A and SB The solicitation Has 4 fob of five ports.