Specifications

Oil Systems Diagnostics
70-6910 183
Home
Controls Indoor Air Quality
Residential
Combustion Controls Hydronic Controls
Water
Controls Building Automation
Commercial
Components Pneumatic Controls
Industrial Combustion
Controls
QS7100 Cad Cell Tester
The QS7100F Flame Quality Monitor (FQM) is designed to be used
with any of the Honeywell Electronic Oil Primary Controls, such as
the R7184A,B,P, or U by simply connecting the devices together
with the communications cable supplied.
• When these two devices are installed as a system, the burner
properly adjusted and the Flame Quality Monitor (FQM) initialized,
the FQM provides continuous monitoring of the flame and gives
warning when the combustion process has changed from its original
operational state.
• This warning normally occurs three to five days before the primary
control would shut down on safety lockout after the FQM alarm.
Depending on the specific cause of the warning, the actual time may
be shorter or longer. Alarm contacts are un-powered and provided
both normally open (NO) and normally closed (NC) contacts to
match the alarm system, tank monitoring system or phone dialer to
which the FQM is connected.
• Typically, the FQM is attached as a zone to the home security
system or can be connected to a small alarm in the home. In either
case, the person responsible for monitoring the alarm function is
provided with directions on how to contact the appropriate oil service
dealer so that service can be scheduled at a mutually convenient
time.
QS7100T Portable Tester/Analyzer
The QS7100F Flame Quality Monitor (FQM) is designed to be used
with any of the Honeywell Electronic Oil Primary Controls, such as
the R7184A,B,P, or U by simply connecting the devices together
with the communications cable supplied.
• When these two devices are installed as a system, the burner
properly adjusted and the Flame Quality Monitor (FQM) initialized,
the FQM provides continuous monitoring of the flame and gives
warning when the combustion process has changed from its original
operational state.
• This warning normally occurs three to five days before the primary
control would shut down on safety lockout after the FQM alarm.
Depending on the specific cause of the warning, the actual time may
be shorter or longer. Alarm contacts are un-powered and provided
both normally open (NO) and normally closed (NC) contacts to
match the alarm system, tank monitoring system or phone dialer to
which the FQM is connected.
• Typically, the FQM is attached as a zone to the home security
system or can be connected to a small alarm in the home. In either
case, the person responsible for monitoring the alarm function is
provided with directions on how to contact the appropriate oil service
dealer so that service can be scheduled at a mutually convenient
time.
Product Number Color Description Used With
QS7100D1003 Black Cad Cell Primary Tester R7184G, R8184 Cad Cell Primaries
Product Number Application Description Used With
QS7100T1004 Testing R8184 and R7184 Cad Cell Primaries. Portable Tester/Analyzer R7184G, R8184 Cad Cell Primaries