Datasheet

ManualsBrandsHoneywell ManualsSensorsUltrasonic Sensor 200mm 2m 2 x PNP (NO + NC)

Sensing and Control

WARNING

MISUSE OF DOCUMENTATION

• The information presented in this product

sheet (or catalogue) is for reference only.

DO NOT USE this document as product

installation information.

• Complete installation, operation and

maintenance information is provided in the

instructions supplied with each product.

Failure to comply with these instructions

could result in death or serious injury.

943 Series

Ultrasonic Distance Sensors

Analogue voltage output

0-10 V and 4-20 mA

Beam angle: 8°

Supply voltage: 15 to 30 V

Sealing: IP67

M30

Housing: M30 x 1,5 mm plastic (PBTB)

Max. sensing distance: 3500 mm

Min. sensing distance: 300 mm

Response time: 400 ms

Repeatability: 0,2 % or ±2 mm

OUTPUT TERMINATION REFERENCE

0-10 V Connector 943-T4V-2D-1C0-130E

0-10 V Cable 943-T4Y-2D-1C0-130E

4-10 mA Connector 943-T4V-2D-1D0-130E

4-20 mA Cable 943-T4Y-2D-1D0-130E

M18

Housing: M18 x 1,0 mm plastic (PBTB)

Max. sensing distance: 2000 mm

Min. sensing distance: 200 mm

Switching frequency: 250 ms

Repeatability: 0,2 % or ±2 mm

OUTPUT TERMINATION REFERENCE

0-10 V Connector 943-F4V-2D-1C0-180E

0-10 V Cable 943-F4Y-2D-1C0-180E

4-10 mA Connector 943-F4V-2D-1D0-180E

4-20 mA Cable 943-F4Y-2D-1D0-180E

Max. sensing distance: 800 mm

Min. sensing distance: 100 mm

Switching frequency: 100 ms

Repeatability: 0,2 % or ±1 mm

OUTPUT TERMINATION REFERENCE

0-10 V Connector 943-F4V-2D-1C0-300E

0-10 V Cable 943-F4Y-2D-1C0-300E

4-10 mA Connector 943-F4V-2D-1D0-300E

4-20 mA Cable 943-F4Y-2D-1D0-300E

Max. sensing distance: 500 mm

Min. sensing distance: 60 mm

Switching frequency: 100 ms

Repeatability: 0,2 % or ±1 mm

OUTPUT TERMINATION REFERENCE

0-10 V Connector 943-F4V-2D-1C0-330E

0-10 V Cable 943-F4Y-2D-1C0-330E

4-10 mA Connector 943-F4V-2D-1D0-330E

4-20 mA Cable 943-F4Y-2D-1D0-330E

WARNING

PERSONAL INJURY

DO NOT USE these products as safety or emergency stop devices, or in any other application

where failure of the product could result in personal injury.

Failure to comply with these instructions could result in death or serious injury.

OPTIONS AND ORDER GUIDE

2 switching outputs

PNP NO and NPN NO

Beam angle: 8°

Supply voltage: 12 to 30 V

Sealing: IP67

M30

Housing: M30 x 1,5 mm plastic (PBTB)

Max. sensing distance: 3500 mm

Min. sensing distance: 300 mm

Switching frequency: 1.0 Hz

Repeatability: 0,2 % or 2 mm

OUTPUT TERMINATION REFERENCE

PNP, 2 NO/NC Connector 943-T4V-2D-001-130E

PNP, 2 NO/NC Cable 943-T4Y-2D-001-130E

NPN, 2 NO/NC Connector 943-T4V-2D-002-130E

NPN, 2 NO/NC Cable 943-T4Y-2D-002-130E

M18

Housing: M18 x 1,0 mm plastic (PBTB)

Max. sensing distance: 2000 mm

Min. sensing distance: 200 mm

Switching frequency: 1.2 Hz

Repeatability: 0,2 % or 2 mm

OUTPUT TERMINATION REFERENCE

PNP, 2 NO/NC Connector 943-F4V-2D-001-180E

PNP, 2 NO/NC Cable 943-F4Y-2D-001-180E

NPN, 2 NO/NC Connector 943-F4V-2D-002-180E

NPN, 2 NO/NC Cable 943-F4Y-2D-002-180E

Max. sensing distance: 800 mm

Min. sensing distance: 100 mm

Switching frequency: 4.7 Hz

Repeatability: 0,2 % or 1 mm

OUTPUT TERMINATION REFERENCE

PNP, 2 NO/NC Connector 943-F4V-2D-001-300E

PNP, 2 NO/NC Cable 943-F4Y-2D-001-300E

NPN, 2 NO/NC Connector 943-F4V-2D-002-300E

NPN, 2 NO/NC Cable 943-F4Y-2D-002-300E

Max. sensing distance: 500 mm

Min. sensing distance: 60 mm

Switching frequency: 4.7 Hz

Repeatability: 0,2 % or 1 mm

OUTPUT TERMINATION REFERENCE

PNP, 2 NO/NC Connector 943-F4V-2D-001-330E

PNP, 2 NO/NC Cable 943-F4Y-2D-001-330E

NPN, 2 NO/NC Connector 943-F4V-2D-002-330E

NPN, 2 NO/NC Cable 943-F4Y-2D-002-330E

The new 943 series industrial

sensors are the latest addition to

our product range. They have

improved scanning ranges, remote

teach in of the switching or

analog outputs, as well as new

advanced features, such as window

and hysteresis modes.

M18

CONNECTOR

3,5

CABLE

M30

CONNECTOR

M30 x 1,5

5,0

11,2

CABLE

5,0

M30 x 1,5

123,5 ±0,5

90 ±0,5

2000 ± 100

M18/M30

Termination: Connector M12 x 1

Cable Preleaded 2 m

Summary of content (6 pages)

PAGE 1
943 Series Ultrasonic Distance Sensors The new 943 series industrial sensors are the latest addition to our product range. They have improved scanning ranges, remote teach in of the switching or analog outputs, as well as new advanced features, such as window and hysteresis modes.
PAGE 2
Warranty/Remedy Sales and Service Honeywell warrants goods of its manufacture as being free of defective material and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective.
PAGE 3
PK 104141-10 Installation Instructions for Ultrasonic Distance Sensor 943 Series with teach-in and analogue output (943-F/T4V/Y-2D-1C0/1D0-130E/180E/300E/330E) Einbauanweisungen für die Ultraschall Abstandssensoren Serie 943 mit einlernbarem Analogausgang (943-F/T4V/Y-2D-1C0/1D0-130E/180E/300E/330E) Instructions d’installation du Capteurs Ultrasoniques séries 943 avec apprentissage et sortie analogique (943-F/T4V/Y-2D-1C0/1D0-130E/180E/300E/330E) WARNING ! ! PERSONAL INJURY • DO NOT USE these products as
PAGE 4
PK 104141-10 943 Series Ultrasonic Distance Sensor Dimensions/Abmessungen/Dimensions (mm) Connector/Steckeranschluss/Connecteur Cable/Kabel/Câble 943-T4V...130E (M30) 943-T4Y...130E (M30) 11,2 123,5 ±0,5 90 ±0,5 5,0 2000 ± 100 M30 x 1,5 M30 x 1,5 5,0 943-F4V...180E/300E/330E (M18) 943-F4Y...
PAGE 5
PK 104141-10 943 Series Ultrasonic Distance Sensor Teach in procedure/Einlernvorgang/Apprentissage 943-F/T4V Echo P1 P2 943-F/T4Y 0 V to 10 V (943...1C0...) 10 V 4 4 mA to 20 mA 943...1D0... Echo P1 P2 10 V 20 mA 20 mA 5 1 3 2 0V P1 P2 0V P2 P1 4 mA P1 P2 4 mA P2 P1 Analogue output adjustment 0 V...10 V/4 mA...20 mA Analoge Kennlinie 0 V...10 V/4 mA...20 mA Sortie analogique 0 V...10 V/4 mA...20 mA P1 and P2 define the analogue output slope.
PAGE 6
PK 104141-10 943 Series Ultrasonic Distance Sensor Warranty/Remedy Garantie Und Haftangsanspruche Garantie/Recours Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective.