Datasheet

ManualsBrandsHoneywell ManualsAutomationLimit Switch, Roller Plunger, 1CO, Snap Action

Datasheet

MICRO SWITCH Miniature Precision Limit Switches

914CE Series

DESCRIPTION

All MICRO SWITCH 914CE Series miniature precision switches

incorporate ﬂuorocarbon diaphragm sealing to provide reliable

protection, meeting NEMA 1, 2, 3, 3R, 4, 6, 6P, and 13, as well

as IP66, IP67, and IP68 requirements. Versions with a boot

seal also meet NEMA 12 requirements (dust, falling dirt, liquid

media with solid contaminates). The cable or connector and

basic switch terminals are encapsulated in an epoxy sealant,

offering excellent resistance in harsh environments. For low

temperature applications (down to 40 °C, 40 °F), CE Series

switches can be supplied with low temperature seals and

lubricant.

The CE Series switches are rugged and versatile switches

which can be applied indoors in many harsh factory ﬂoor

applications, as well as on outdoor equipment in extreme

temperatures. A full range of actuators are available, including

pin plungers, roller plungers, side rotary, multi-directional wire,

and manually operated. The switches are also available with

the industry standard, M12 micro-change 4-pin connector.

MICRO SWITCH 914CE products meet North American, cURus

standards, as well as European CE requirements.

VALUE TO CUSTOMERS

• Big performance in a small package

• Delivers consistent performance in many demanding

environments where petroleum, synthetic, or water based

ﬂuids are present

• Product variation within deﬁned nomenclature

FEATURES

• Rugged, miniature construction means minimal real estate

on equipment

• NEMA 1, 2, 3, 3R, 4, 6, 6P, 12 (boot seal), 13, and

IP66/67/68 environmental sealing

• Pre-leaded (UL cable) or supplied with a M12 four-pin

connector

• Wide selection of actuators and cable length variations with

side and bottom exit cable/connector options

• 25 mm mounting centers engineered with a MICRO SWITCH

SM switch for consistent, precise actuation

• Well suited for up to 10 million actuation cycles (Up to 5

million actuation cycles for wobble actuators)

• Gang mounting capability to provide a multi-plunger limit

switch

• Low temperature variants available for indoor and outdoor

applications

• cURus, CE approvals for world-wide use

POTENTIAL APPLICATIONS

• Machine tools

• Off-road equipment

• Material handling

• Dock locks and dock levelers

• Access and mobility solutions

• Textile machinery

• Robotics

• Packaging equipment

• Commercial appliances

• Print trade machinery

• Agricultural machinery

DIFFERENTIATION

• Diaphragm seal between the actuator and the switch cavity

for high performance sealing

• CE Series incorporates a MICRO SWITCH SM basic switch

for consistent, precise actuation

• Side exit termination for space constraints

PORTFOLIO

Honeywell’s MICRO SWITCH 914CE limit switch is part of a

comprehensive offering of rugged and reliable limit switches.

To view the entire product portfolio, click here.

Sensing and Internet of Things

002381

Issue 9

Summary of content (9 pages)

PAGE 1
MICRO SWITCH Miniature Precision Limit Switches 914CE Series 002381 Issue 9 Datasheet FEATURES DESCRIPTION All MICRO SWITCH 914CE Series miniature precision switches incorporate fluorocarbon diaphragm sealing to provide reliable protection, meeting NEMA 1, 2, 3, 3R, 4, 6, 6P, and 13, as well as IP66, IP67, and IP68 requirements. Versions with a boot seal also meet NEMA 12 requirements (dust, falling dirt, liquid media with solid contaminates).
PAGE 2
MICRO SWITCH Miniature Precision Limit Switches, 914CE Series Table 1.
PAGE 3
MICRO SWITCH Miniature Precision Limit Switches, 914CE Series SWITCHING AND LEAD IDENTIFICATION 914CE GREEN SPDT RED 2 BLACK 1 3 WHITE 2 3 1 PINOUTS Connector - (dc) (-Q) Connector (dc) (-Q2) Connector (ac) (-Q1) NO 3 2 2 1 3 1 3 1C NC 2 CONNECTOR VERSIONS MOUNTING in both bottom and side exit versions. MICRO SWITCH 914CE Series switches are mounted by using two M5 or #10 screws.
PAGE 4
MICRO SWITCH Miniature Precision Limit Switches, 914CE Series GENERAL DIMENSIONS • ALL SWITCHES CABLE VERSION 40 mm max. [1.57 in max.] 16 mm max. [0.63 in max.] 25 mm [0.98 in] Two (2) holes Ø 5.1 mm [Ø 0.2 in] dia. c/bore 10,2 mm dia x 6 mm deep [0.40 in dia x 0.24 in deep] (Both sides - option “A” only) Pretravel (PT) Overtravel (OT) 3 mm min. [0.12 in min.] Max. free length Operating position (OP) 7,6 mm [0.30 in] M12 thread 44 mm max. [1.73 in max.] 8,0 mm [0.31 in] TYPE Q or Q2 15 mm [0.
PAGE 5
MICRO SWITCH Miniature Precision Limit Switches, 914CE Series PRODUCT SPECIFICATIONS AND LISTINGS Contact your Honeywell rep or distributor for additional listings 914CE1 • Pin Plunger 914CE27 • Pin Plunger Panel Mount Ø10,0 mm [Ø0.39 in] PT OT FP OP Pretravel • 1,8 mm [0.071 in] Diff. travel • 0,1 mm [0.004 in] Overtravel • 3,0 mm [0.118 in] Oper. force • 12,2 N [2.75 in-lb] M10 X 1 METRIC THREAD 12 mm [0.49 in] THREADED LENGTH OT PT FP OP 914CE18 • Boot Sealed Pin Plunger Ø7,0 mm [Ø0.
PAGE 6
MICRO SWITCH Miniature Precision Limit Switches, 914CE Series 914CE2 • Roller Plunger 914CE28 • Roller Plunger Panel Mount Ø12,4 mm [Ø0.49 in] PT OT FP OP Pretravel • 1,8 mm [0.071 in] Diff. travel • 0,1 mm [0.004 in] Overtravel • 3,0 mm [0.118 in] Oper. force • 12,2 N [2.75 in-lb] ROLLER Ø 12,4 mm x 4,7 mm [Ø 0.48 in x 0.020 in] M14 X 1 THREAD OT Contacts Elec Rating Cable/ Connector Position Free Position (FP) Operating Position (OP) Options Listing Silver A Bottom 30,3 mm [1.
PAGE 7
MICRO SWITCH Miniature Precision Limit Switches, 914CE Series 914CE55 • Boot Sealed Cross Roller Plunger ROLLER Ø 12,4 mm x 4,7 mm Ø 0.48 in x 0.020 in] BOOT SEAL OT PT FP OP NYLON BUTTON Ø26,4 mm [Ø1.04 in] PT FP OP M4 CORROSION RESISTANT SCREW AND LOCKNUT OT FP [ADJUSTABLE] OP Pretravel • 1,8 mm [0.071 in] Diff. travel • 0,1 mm [0.004 in] Overtravel • 3,0 mm [0.118 in] Oper. force • 17,5 N [5 lb] 914CE20 • Random Motion Wire Actuator OP ALL DIRECTIONS EXCEPT DIRECT PULL Ø1.8 mm [Ø0.
PAGE 8
MICRO SWITCH Miniature Precision Limit Switches, 914CE Series 914CE16 • Side Rotary FP PT OT DT Actuator shaft Ø7,32 mm [Ø0.288 in] 1 PT OT DT 18,9 mm [0.74 in] Pretravel • 30° Diff. travel • 3° Overtravel • 40° Oper.
PAGE 9
m WARNING ADDITIONAL MATERIALS PERSONAL INJURY • Product installation instructions DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury.