Dolphin™ 6100 Mobile Computer with Windows® Embedded Handheld 6.
Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.
Table of Contents Chapter 1 - Agency Approvals Label Locations ....................................................................................................................1-1 Safety & RF Approvals by Country: .....................................................................................1-2 Dolphin RF Terminal—802.11b/g and/or Bluetooth .............................................................1-3 Chapter 2 - Getting Started Out of the Box ..................................................
Function Key Combinations................................................................................................. 4-3 CTRL Key Combinations ..................................................................................................... 4-4 Program Buttons.................................................................................................................. 4-4 Chapter 5 - Using the Image Engine Overview...............................................................................
Connections Manager ......................................................................................................... 8-4 To Access the Connections Manager............................................................................ 8-4 Tasks ............................................................................................................................. 8-4 Advanced.......................................................................................................................
Parts and Functions........................................................................................................... 12-2 Front Panel .................................................................................................................. 12-2 Back Panel .................................................................................................................. 12-3 Bottom Panel ........................................................................................................
1 Agency Approvals Label Locations Dolphin 6100 mobile computers meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency guidelines that follow. Read these guidelines carefully before using your mobile computer. Compliance Label Laser Light Label Laser Light Label LASER LIGHT. DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT 1.
Safety & RF Approvals by Country: Country Safety RF (Radio) U.S.A. UL60950-1 FCC Part 15, Sub part B, Sub part C Canada* C-UL CSA C22.2 No.
Laser Safety Label If the following label is attached to your product, it indicates the product contains LASER LIGHT. DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT an imager engine with a laser aimer (5300) or a laser engine (IS4813). 1.0 mW MAX OUTPUT: 650nM IEC60825-1: 1993+A1+A2 Laser Eye Safety Statement: This device has been tested in accordance with Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser and complies with IEC60825-1: 1993+A1+A2 and 21 CFR 1040.10 and Notice No.
This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To maintain compliance with FCC RF exposure guidelines for bodyworn operation, do not use accessories that contain metallic components. CAUTION! Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. ! Canadian Compliance This Class B digital apparatus complies with Canadian ICES-003.
2 Getting Started Out of the Box Verify that your carton contains the following items: • Dolphin 6100 mobile computer (the terminal) • Main battery pack (3.7v, Li-Ion) • AC power supply • Localized plug adapters Note: Be sure to keep the original packaging in case you need to return the Dolphin terminal for service; see Customer Support on page 13-1. Step 1. Install the Main Battery The Dolphin 6100 is shipped with the battery packaged separate from the unit.
Step 2. Charge the Batteries Dolphin 6100s ship with both the main battery pack and internal backup battery significantly discharged of power. Charge the main battery pack with the Dolphin charging cable until the LED turns green (red while charging). The average charge time for a fully depleted main battery is 5 1/2 hours. It takes less time if the battery has some charge. 1. Attach the appropriate plug adapter to the plug of the power cable.* 1 2 2. Insert the plug into the appropriate power source.
The power adapter on the power cable converts the voltage from the power source to 5 volts DC. Only power adapter cables from Honeywell convert the voltage appropriately. The power cable contains a plug adapter for each geography (US, UK, EU, etc.). Plug Adapter Power Adapter Power Cable Step 3. Boot the Terminal The terminal begins booting as soon as power is applied and runs by itself. Do NOT press any keys or interrupt the boot process.
Home Screen After the Dolphin terminal initializes the first time, you see the Home screen. Tap Tap to reach the Start screen from the home screen. to access the Dolphin Wireless Manager Window (see page 8-7) from the home screen. For more information about the touch screen, see Touch Screen Display on page 3-2. Title Bar The Title bar, located at the top of the screen, displays the active program, the status of various system functions, and the current time.
Horizontal Scroll Indicator Meaning Synchronizing data The terminal could not synchronize data with the workstation via ActiveSync. New e-mail New text message New voicemail New instant message Ringer off A battery error has occurred. Replace the main battery pack with a Honeywell Li-poly or Li-ion battery pack.
The Horizontal Scroll, located at the top of most application windows, provides access to additional application screens. You can flick left or right on the scroll or tap each label on the scroll, until you get to the desired screen. Tapping a label to the left or right of the center item brings new labels into view. Note: Tap the Title bar to access the horizontal scroll if it is not visible on the screen. The content of the Horizontal scroll changes according to the open application.
File Explorer You can also use the File Explorer to find files and organize these files into folders. 1. Tap > File Explorer . 2. Tap the Up button at the bottom of the screen to move up one level in the directory. 3. You can move files in File Explorer by tapping and holding on the item you want to move, then tapping Cut or Copy on popup menu. 4. Navigate to the folder you want to move the file to, then tap and hold a blank area of the window. 5. Tap Paste on the pop-up menu.
2-8
3 Terminal Hardware Overview Dolphin 6100 terminals include a number of standard terminal configurations as well as charging and communication peripherals and accessories to maximize the efficiency of your application setting. Standard Terminal Configurations There are two standard Dolphin 6100 configurations: WPAN only and WPAN/WLAN. Both configurations include the following options; however, the WPAN/WLAN configuration has both a Bluetooth radio and an 802.11b/g radio.
Front Panel Features LED Touch Screen Display (screen protector installed at the factory) Scan key Navigation keys Keypad (28-key shifted alpha numeric) Power key Software Reset key Scan/Decode LED The LED lights red when you press the Scan trigger in scanning applications. The LED lights green when a scanned bar code is successfully decoded. The LED lights red while the main battery is charging. The LED lights green when the main battery charging has completed.
For touch screen input, use the stylus included with the terminal or your finger. The method you choose depends on which one is most appropriate for your application. While there is a great deal of variation in different applications, you generally achieve greater accuracy with the stylus for buttons or icons that are close together. ! Use of objects, such as paper clips, pencils, or ink pens on the touch screen can damage the input panel and may cause damage not covered by the warranty.
Removing the Screen Protector Dolphin 6100s ship with a touch screen protector already installed. To replace the screen protector, you must remove the one already installed. 1. Press the red Power button to suspend the 28-key unit or press the Blue then Z (Power) keys to suspend the 52-key unit. 2. Using a strong, flat, plastic card (e.g., credit card) wedge the edge of the card under the existing screen protector. Catch the edge of the screen protector and pull it up and away from the touch panel.
4. Align the exposed edge of the screen protector along the left edge of the touch panel. Make sure that it lies flush with edges of the touch panel. Backing Paper Screen Protector Note: To reposition the screen protector, lift up gently and reapply. 5. Use the card on top of the screen protector to smooth it out as you pull on the backing paper.
6. Pull smoothly and evenly from left to right until the screen protector is applied. Press gently but firmly. Use the card as necessary to smooth out any air pockets or bumps after application. 7. Press the Power key to wake the terminal and check the touch panel with the stylus. 8. Verify that the screen accepts input from the stylus as usual. If not, re-apply the screen protector. 9.
12. For maximum performance, recalibrate the screen. Tap Screen. > Settings > System > Screen > Align 13. Tap Recalibrate and follow the instructions on the screen.
Back Panel Features Engine Window Hand Strap (with Stylus) Speaker Finger Saddle Installed Battery Hand Strap The Dolphin 6100 comes with an adjustable, elastic hand strap. The strap is attached to the device with the two small screws. It is threaded through the slot on the bottom of the back of the unit. Keep in mind that the hand strap covers the battery. When you want to replace the battery, you will need to adjust the hand strap accordingly.
Left Side Panel Features Micro SD Slot Side Button Side Button There is a button like this on both side panels. You can use the Program Buttons option to change the functionality of the side buttons. Tap Buttons. > System > Settings > Program Side Door The rubber door on the left side panel provides access to the Micro SD slot. When closed, the side door seals the terminal from moisture and particle intrusion thus preserving the terminal’s environmental rating.
Right Side Panel Features Side Button Headset Jack Headset Jack The rubber door on the right side panel provides access to the headset jack. This is a 2.5mm audio jack that supports a headset with a mono speaker and microphone. When closed, the side door seals the terminal from moisture and particle intrusion thus preserving the terminal’s environmental rating. Side Button There is a button like this on both side panels.
Bottom Panel Features DC Power Jack I/O Connector DC Power Jack The DC power jack receives external power from the Dolphin power cable that is included in the box with the terminal. When connected to the Dolphin power cable, the terminal is powered and the main battery pack is charging. I/O Connector The I/O mechanical connector is designed to work exclusively with Dolphin 6100 peripherals and cables. This connector powers the terminal, charges the main battery, and facilitates communication.
Dolphin HomeBase™ Device This charging and communication cradle supports USB and RS-232 communication, enabling your terminal to interface with the majority of enterprise systems. When a terminal is seated in a powered base, its main battery pack charges in an average of 5 1/2 hours for a fully depleted battery. It takes less time if the battery has some charge. A spare battery may also be charged in the battery charging well behind the terminal.
Main Battery Pack ! Caution:We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. There are two Li-ion battery packs available for the 6100: Standard Capacity: Li-ion 3.7V/2200mAh/8.1Wh Extended Capacity: Li-ion 3.7V/3300mAh/12.2Wh The Li-Ion battery pack is the primary power source for the Dolphin terminal as well as the internal backup battery.
Managing Main Battery Power Data and files saved on the Dolphin terminal may be stored in RAM memory; therefore, maintain a continuous power supply to the terminal to help prevent data loss. When you remove a battery pack, insert another charged battery pack in the Dolphin. If the main battery pack is low, insert the terminal into a charging peripheral to power the terminal and begin recharging the battery.
• If you observe that the Honeywell battery supplied is physically damaged in some way, send it to Honeywell International Inc. or an authorized service center for inspection. Refer to the Technical Assistance (page 13-1) section of this guide. • Although your battery can be recharged many times, it will eventually be depleted. Replace it after the battery is unable to hold an adequate charge.
You would perform a soft reset 1) when the terminal fails to respond, 2) after installing software applications that require a reboot, 3) after making changes to certain system settings, or 4) to install new CAB or REG files. The desktop appears when the Soft Reset is complete. Hard Reset (Cold Boot) ! Warning:A hard reset erases all of the data and applications stored in RAM memory, reloads the OS, resets the Real Time Clock (RTC), and launches Autoinstall, which installs any CAB or REG files in the \\H
Dolphin 6100 Technical Specifications Operating System Microsoft Windows Embedded Handheld 6.5 Development Environment Honeywell SDK for Windows Embedded Handheld 6.5 Application Software Honeywell Power Tools and Demos Processor Marvell PXA 300 624MHz Memory 256 MB RAM X 256 MB Flash Expansion Memory User accessible Micro SD memory card slot with SDIO support. Please check current price guide for available qualified card options. Display 2.8 in.
WLAN Security WEP, 802.1x, LEAP, TKIP, MD5, EAP-TLS, EAP-TTLS, WPA-PSK, WPA v2.0, and PEAP Operating Temperature 14° to122°F (-10° to 50°C) Charging Temperature 32° to 104°F (0° to 40°C) Storage Temperature -4° to 158°F (-20° to 70°C) Humidity 95% humidity, non-condensing Construction High impact resistant PC/ABS housings Magnesium alloy internal chassis with component shock mounts Drop 4 ft. (1.2m) multiple drops to concrete, all axis, across operating temperature range Tumble 500 3.3 ft (1.
4 Using the Keypad Overview Navigation keys Power key Navigation Keys Located in the center of the keypad for easy access with either hand, the navigation keys enable you to move the cursor up and down lines and from character to character.
Basic Keys Name Function ALPHA Toggles the keypad between alpha (upper and lowercase) and numeric modes. The 'A/a/1” indicator on the Title Bar changes accordingly. Backspace (BKSP) Backspace moves the cursor back one space. If you are typing text, a character is deleted each time you press the backspace key. Control (CTRL) Modifies the next key pressed to type specific characters (e.g., pressing CTRL and a “2”, types an “@” sign. Escape (ESC) Cancels an action and returns to the last action.
Function Key Combinations The Function key (FUNC) modifies the next key pressed to perform specific functions. The keypad is color-coded in blue to indicate these key combinations. Note: The color-coded indicators are located below each key. Key Combination Function FUNC + 1 F5 FUNC + 2 F6 FUNC + 3 F7 FUNC + 4 Toggle the wireless radio on and off FUNC + 5 Increase screen brightness FUNC + 6 Increase volume FUNC + 7 Tab FUNC + 8 Decrease screen brightness FUNC + 9 Decrease volume FUNC + .
CTRL Key Combinations The Control key (CTRL) modifies the next key pressed to type specific characters. The keypad is colorcoded in yellow to indicate these key combinations. Note: The color-coded indicators are located below each key. Key Combination Function CTRL + 1 ! CTRL + 2 @ CTRL + 3 # CTRL + 4 $ CTRL + 5 % CTRL + 6 ^ CTRL + 7 & CTRL + 8 ( CTRL + 9 ) CTRL + .
5 Using the Image Engine Overview The Dolphin 6100 houses a compact image engine using Adaptus™ Imaging Technology that instantly reads all popular 1D and 2D bar codes and supports omni-directional aiming and decoding. The image engine can also capture digital images, such as signatures and pictures. Available Image Engines The Dolphin 6100 can be equipped with a 5300 Standard Range (5300SR) image engine (depending on the configuration purchased). Depth of Field 5300 Standard Range (5300SR) 8.
Supported Bar Code Symbologies Symbology Type Symbology Name 1D Symbologies Codabar Code 3 of 9 Code 11 Code 32 Pharmaceutical (PARAF) Code 93 Code 128 EAN with Add-On EAN with Extended Coupon Code EAN-13 GS1 Databar 2D Symbologies Aztec Code 16K Composite Data Matrix Grid Matrix GS1 Databar Han Xin MaxiCode OCR PDF417 QR Code Composite Codes Aztec Mesa Codablock F EAN·UCC GS1 Databar-14 OCR OCR-A OCR-B OCR-US Money Font Postal Codes Postnet and most international 4 state codes Australian Post Br
Activating the Engine When a scanning application is open, press the Scan key to activate the image engine. Using Demos Dolphin Demos are software utilities loaded on Dolphin terminals that demonstrate the advanced features of the terminal. There are two Demos that feature the image engine: Image Demo and Scan Demo. To access these demos, tap > Demos. • Select Scan Demo to verify decoding, or • Select Image Demo to verify imaging (not available on device using the IS4813 laser engine).
Omni-Directional Scanning Positions The high-vis aiming pattern frames the bar code to provide you with the best scanning performance. Note: To achieve the best read, the aiming beam should be centered horizontally across the bar code. The aiming pattern is smaller when the terminal is held closer to the code and larger when the terminal is held farther from the code.
6. By default, the image is saved to the My Documents folder in My Device. To save the image to another location, tap File > Save As. High-Vis Aiming Pattern If your Dolphin terminal is configured with the 5300SR imager, you can enable the aiming pattern for imaging in the Image Demo application. 1. Tap > Demos > Image Demo > Setup menu > Aimer. 2. The aiming pattern is now enabled for imaging. Uploading Images Image files can be transmitted to a host workstation via the following methods.
5-6
6 Using the Laser Engine Overview The Dolphin 6100 (IS4813 laser version) contains a laser diode that emits a beam toward an oscillating mirror that scans through the code and the reflected light is bounced off of two mirrors back to the collector. The 6100 Laser reads all popular 1D bar codes. Available Laser Engines The Dolphin 6100 can be equipped with an IS4813 laser engine (depending on the configuration purchased). Depth of Field - IS4813 5.2 mil 7.5 mil 10.4 mil 13.0 mil 19.
Activating the Engine When a scanning application is open, press the Scan key to activate the laser engine. Using Demos Dolphin Demos are software utilities loaded on Dolphin terminals that demonstrate the advanced features of the terminal. > Demos. To access these demos, tap • Select Scan Demo to verify decoding, or Decoding a Bar Code 1. Tap > Demos > Scan Demo. 2. Position the Dolphin terminal over one of the sample bar codes on page 6-2.
7 System Settings Overview Customized settings are available on the System Settings menu. Tap screen opens. > Settings and the settings Icon Description Bluetooth Configures the Bluetooth radio. See Enabling the Bluetooth Radio on page 9-1. Clock & Alarms Set the system clock, date, time and schedule alarms. See Clock & Alarms on page 7-2. Lock Password protect the terminal to limit access to the terminal.
Icon Description System Adjusts system settings. See System Menu on page 7-7. Clock & Alarms The Clock & Alarms settings can be accessed from the Home screen or the Settings Menu. 1. On the Home screen, tap the line that displays the time and date OR Tap 2. > Settings > Clock & Alarms, The Clock Settings screen appears. This setting sets the system clock. All scheduled items run according to this setting. Tap the arrow to the right of the time zone to open the drop down menu.
Personal Menu To access the Personal Menu, tap Menu. > Settings > Personal. The screen opens displaying the Personal Icon Description Buttons Program the side buttons to perform specific tasks. See Buttons on page 7-3. Owner Information Enter your contact information (e.g., name, company, address, telephone number and E-mail address). Voice Command Tap this icon to set up items that are voice enabled.
Changing Button Assignments 1. Tap > Settings > Personal > Buttons . Note: The buttons that appear on this window are the only buttons that can be programmed via the Buttons setting. You cannot add buttons to this window. 2. To change button assignment, tap on the name of the button in the Button column, and then select a program or command in the Assign a program drop down list. 3. Tap OK to save. 4. Press the button to verify that the program is launched or action performed.
Command Description Opens the menu or performs the action displayed on the right side of the Command bar. Activates the scanner/imager. Changes the screen orientation from portrait to landscape. Scrolls down in the open application. Scrolls left in the open application. Scrolls right in the open application. Scrolls up in the open application. Opens the Start menu.
3. Navigate to the Windows folder and open the Start Menu (My Device > Windows > Start Menu > Programs), tap and hold a blank area of the window, and tap Paste Shortcut on the pop-up menu. Note: If there is no blank space available in the window, tap on Menu > Edit > Paste Shortcut. 4. 7-6 Tap to verify that the program now appears on the Start menu.
System Menu The System menu enables you to verify and sometimes alter system parameters. To access the System menu, go to > Settings > System. Tap the appropriate icon to open that system setting. Icon See Page About See About on page 7-8. Backlight See Backlight on page 7-8. Power See Power on page 7-12. Certificates See Certificates on page 7-9. Customer Feedback See Customer Feedback on page 7-9. Encryption See Encryption on page 7-10. Error Reporting See Error Reporting on page 7-10.
Icon See Page External GPS See External GPS on page 7-11. Managed Programs See Managed Programs on page 7-11. Program Buttons See Program Buttons on page 4-4. Memory See Memory on page 7-11. Regional Settings See Regional Settings on page 7-14. Remove Programs See Remove Programs on page 7-14. Screen See Screen on page 7-16. Task Manager See Task Manager on page 7-17. About The About system setting displays specific information about the terminal.
Tap > Settings > System > Backlight. On Battery Tab On External Tab Keypad Backlight Tab The On Battery tab determines the backlight timeout when the terminal is running on battery power. The On External tab determines the backlight timeout when the terminal is running on external power. The options on the On Battery and On External tabs are the same. Turn off backlight: Select how many minutes you want to elapse before the backlight automatically turns off.
Encryption Encryption gives you the option of encrypting files placed on storage cards so that those files cannot be read by any other device. Error Reporting Error Reporting gives you the option of enabling or disabling the error reporting function of Windows Embedded Handheld 6.5.
External GPS External GPS determines which port a third-party GPS software application can use to access the GPS receiver. Battery Power Tab External Power Tab Brightness Tab Note: You need the installation parameters from the GPS manufacturer to configure the connection. Managed Programs Managed Programs are a list of programs that are managed if enrolled to enterprise domain. Managed Programs is the client-side that works with the server product System Center Mobile Device Manager (MDM).
Storage Card Screen This screen displays the current capacity and usage statistics of the selected memory type: Storage Card. Total storage card memory = The total MB of memory capacity of Storage Card. In use = The MB currently being used. Free = The MB that is still available for use. Storage Card—You can install one memory card in Dolphin terminals (see Installing Memory Cards on page 3-9). If a storage card is installed in the terminal, you can see capacity and usage statistics for the card.
Determines power time-outs. For On battery power, select from the drop-down list, the number of minutes of inactivity you want to pass before the terminal powers off when running on battery power. For On external power, select from the drop-down list, the number of minutes of inactivity you want to pass before the terminal powers off when running on external power. CPU Power Setting Tab Allows you to configure the CPU power setting to extend the battery life or to increase the CPU performance.
Regional Settings Regional Settings enables you to customize the appearance and formatting to your geographic region. Specifically, you can customize numbers (i.e., number of decimal places allowed), currency (i.e.,using the $ or €€ symbol), time, and date. These specifications apply to all screens, including the Home screen. The Region tab displays an overview of the region selected in the drop-down list at the top. The terminal is loaded with a number of pre-programmed regional settings.
2. Tap Remove. The following message appears: 3. Tap Yes. Wait while the program is removed. 4. Verify that the program no longer appears in the list.
Screen The Screen system setting contains three screens: General, Clear Type, and Text Size. General Screen Orientation The General screen enables you to set the dynamic screen rotation. Three choices of screen orientation are supported: Portrait, Landscape (right-handed), and Landscape (lefthanded). Align Screen The General Tab also allows you to re-align the screen. You need to re-align the screen if tapping buttons or icons with the stylus no longer seems to work appropriately.
Text Size Screen The Text Size screen enables you to perform font scaling within certain views of the: • Home screen, • Contacts, • Calendar, • Messaging, and • Tasks. Font scaling means that you can increase or decrease the point size of the font on application windows. To change the font size, move the slider toward Smallest or Largest. The Example text changes to reflect the font change. Tap OK to save the new font size setting.
Using the Task Manager Applications To view the status of the programs running on your mobile computer, tap the Menu button at the bottom of the screen, then tap View > Applications. From the application list, you can: • Tap and hold on an application, then tap Switch To on the pop-up menu. • Tap and hold on an application, then tap End Task or End All Tasks on the pop-up menu. Note: Anytime you stop a running program, it frees up memory.
8 Communication Connecting the Dolphin 6100-USB Communication Cable To facilitate USB communication between the Dolphin terminal and the host workstation, you may connect your unit to a host by using either the optional Dolphin 6100-USB Communication Cable or HomeBase. If you use the Communication Cable, slide the cable unit onto the bottom of the terminal lining up the terminal’s I/O connector with the cable unit’s connector.
2. Select the USB charging option (100mA or 500mA). If you do not disconnect the cable, the option will be grayed out. 3. Re-connect the cable.
Connections Menu The Connections system setting provides access to the terminal’s various wireless communication options. Icon Tapping this icon… Connections Opens Microsoft’s connections manager. Dolphin Wireless Manager Manages the wireless radios installed in the terminal. See Dolphin Wireless Manager on page 8-6. Domain Enroll Opens the Enrollment screen for connecting your phone with company resources.
Connections Manager Microsoft’s Connections Manager sets up multiple network connections to Internet Service Providers (ISPs) via external modem. Do NOT enter connection parameters in the Connections Manager if: • you are using one of the on-board wireless radios to connect to a network. The Dolphin terminal uses the settings from each radio’s configuration utility to connect. The connections manager is used primarily to setup WAN modem dial up connections. • you are using Wireless Zero Config.
• Proxy server connection Note: If you are connected to your ISP or private network during synchronization, the terminal should download the proper proxy settings during synchronization with the workstation. If these settings are not on your workstation or need to be changed, ask your ISP or network administrator for the proxy sever name, server type, port, type of Socks protocol used, and your user name and password.
Dolphin Wireless Manager The Dolphin Wireless Manager provides a centralized interface that enables and disables all the onboard radios. Each radio has its own configuration program. The Dolphin Wireless Manager also provides shortcuts to the configuration utilities for each radio. Tap on the Home screen to access the Dolphin Wireless Manager. OR 1. Tap once on the Title bar to access the Horizontal Scroll bar. 2. Tap 3. Select, “Dolphin Wireless Manager”. 8-6 .
Dolphin Wireless Manager Window These buttons show you the state of the radio. Enabling the Radios 1. Tap on the Home screen to access the Dolphin Wireless Manager. 2. Tap anywhere inside the rectangle of the radio you want to enable. 3. The radio begins activating. 4. When the radio is activated (i.e., transmitting a signal), the OFF button changes to ON. Note: If applicable, information about the radio appears in the rectangle.
Accessing Radio Configuration Utilities Each radio has its own configuration utility that you can access by tapping Menu on the tile bar. Radio Type Menu Option 802.11/b/g Tap WLAN Settings and the Honeywell WLAN Security Supplicant opens. Bluetooth 8-8 The Honeywell WLAN Security Supplicant User’s Guide is available for download from the Dolphin 6100WEH product page at www.honeywellaidc.com. Tap Bluetooth Settings and the Bluetooth Settings open.
Network Cards The Network Cards screen allows you to set and configure the type of Network Adapter the Network card in the terminal uses. You can modify the adapter settings (e.g., Name Servers or IP address) by tapping on the adapter type or highlighting the adapter and tapping Edit at the bottom of the screen. Connecting and Synchronizing the Terminal and Workstation To synchronize data between the terminal and the workstation, ActiveSync (version 4.
• Select which information types are synchronized, controlling how much data is synchronized. For example, you can choose how many weeks of past appointments you want synchronized.
Synchronizing with the Host Workstation After setup, synchronization begins automatically whenever the terminal’s mechanical connector connects to a Dolphin peripheral that is connected to a host workstation with ActiveSync or Windows Mobile Device Center installed. For additional information visit the Microsoft Phone Web site (http://go.microsot.com/fwlink/?LinkId=147001). Exploring the Terminal from the Workstation ActiveSync 1. Open the main ActiveSync window (on the desktop). 2. Click Explore.
1. Download the program to the workstation from either the Internet or the install CD. You may see a singe *.exe or setup.exe file, a *.cab file, or a *.dll file. Note: There may be several versions of files for different device types and processors. Select the file that matches the terminal’s processor. 2. Read any installation instructions, Read Me files, or documentation that comes with the program. Many programs provide special installation instructions. 3.
Connecting the Terminal to a Wireless Network You connect the terminal to a wireless network through the on-board radio (802.11b/g, Bluetooth). Each radio has its own configuration utility and requires specific information about the wireless network to connect. Successful connection depends on your network infrastructure about which you will need specific information from your network administrator. WLAN (802.11b/g) The Dolphin 6100 has a 2.4 GHz 802.11b/g WLAN (Wireless Local Area Network) radio.
! To prevent data loss, back up all user data to an SD card or external memory device before performing an upgrade. Note: An active Microsoft ActiveSync or Windows Mobile Device Center connection between a host workstation and the Dolphin terminal may be required for some types of software upgrades. For additional information, see Connecting and Synchronizing the Terminal and Workstation on page 8-9.
9 Working with the Bluetooth Radio Enabling the Bluetooth Radio You enable the Bluetooth radio in the Dolphin Wireless Manager (see page 8-6). 1. Tap on the Home screen to access the Dolphin Wireless Manager. 2. Tap anywhere inside the Bluetooth rectangle and Bluetooth begins activating. 3. When the radio is activated (i.e., transmitting a signal), the OFF button changes to ON. Now, the Bluetooth radio is transmitting a signal.
Pairing and Trusted Devices The terminal does support pairing. Pairing happens during general connection setup. Paired devices are "trusted" devices. This means that there is unrestricted access to all services (including services that require authorization and authentication). A connection can exclude pairing. A device that is connected to the terminal but not paired with it is considered an untrusted device.
4. Select a device from the list and tap Next. The types of devices in the vicinity of the radio appear in the list of discovered devices. 5. You are prompted to enter a passcode. • If the device has a specific passcode, enter it in the Passcode field and tap Next. When attempting to connect to a printer or headset with Bluetooth capabilities, the passcode may default to either 1111 or 0000. If there is no default, consult the device literature for the number.
8. When the connection is complete, a list of matching and supported services on the device appears. Only the services that are mutually supported on both devices appear in the Partnership Settings window. 9. Select the services you want to use and tap Save. The services on the new devices have to be selected or the pairing won’t include those services, even though the devices are paired. If services are not selected, you will be continually re-prompted for the passcode from the device. 10.
4. The Bluetooth radio begins searching for devices. When a Bluetooth device is first found, it appears as an Unknown device; the icon indicates that the device is a Bluetooth device. As data is retrieved, the device IDs appear in the list. 5. Tap the device to begin sending the selected file. 6. While trying to connect, the selected device reads “Pending”. 7. When the file is being transferred, the selected device reads “Sending”.
Making the Terminal Discoverable By default, the Dolphin terminal is not discoverable, which means that the terminal will not be found by other Bluetooth devices. To make the terminal discoverable, tap Mode on the Horizontal scroll. Select Make this device visible to other devices and tap OK.
10 Dolphin HomeBase/eBase Device Overview Note: The information in this chapter applies to both the Dolphin HomeBase and Dolphin eBase devices unless otherwise indicated. As the hub of your Dolphin 6100 system, the Dolphin HomeBase charging and communication cradle supports full-speed USB 1.1 and RS-232 communication with a workstation. The Dolphin eBase is identical to the Dolphin HomeBase except it supports Ethernet communication as well as USB 1.1, and RS-232.
Front Panel Terminal Well Charging LED Terminal Well Place the Dolphin terminal in the terminal well to communicate with a host device, power the terminal, and charge the terminal’s battery. Make sure that the device is securely seated. Rubber Feet The bottom panel has four rubber feet to stabilize the unit on a flat surface. You can set the base on a dry, stable surface, such as a desktop or workbench near an electrical outlet.
Back Panel HomeBase eBase Serial Port Serial Port USB Port USB Port DC Power Jack Ethernet Port DC Power Jack DC Power Jack Connect the power cable to this power jack; see Powering the Dolphin HomeBase Device on page 10-4. USB Port The USB port is full-speed (v1.1). Using the USB cable, you can connect the base to a USBcompliant device to facilitate USB communication to and from the terminal. USB communication occurs through Microsoft ActiveSync (v.4.1 or higher).
Powering the Dolphin HomeBase Device The terminal requires 5 volts DC input for communication and battery charging; the power adapter on the power cable converts the voltage from the power source to 5 volts DC. Only power adapter cables from Honeywell convert the voltage appropriately. The same power cable that ships with each terminal can be used to power the base. This cable contains a plug adapter for each geography (US, UK, EU, etc.). Plug Adapter Power Adapter Power Cable 1.
The following illustration shows how to install the ferrite on the cable. It should be placed approximately 1.57 inches (40mm) from the RJ45 plug. The cable should be looped around the core, as shown. Charging the Main Battery The base powers the terminal and fully charges its main battery pack in an average of 5 1/2 hours for a fully depleted battery. It takes less time if the battery has some charge.
Charging a Spare Battery The base can also charge a second battery while the terminal is positioned in the base. The second battery can be inserted in the battery charging well in back of the terminal connection. Place the battery in the well with the label facing up and toward the back of the unit. Angle the battery as shown. Once the connectors engage, the LED lights. If the LED is red, the unit is charging; if it is green, the charge is complete.
Technical Specifications Structural Dimensions 5.3 in. high X 4.5 in. wide X 3.1 in. deep (13.5 cm. X 11.4 cm. X 7.9 cm.) Weight Dolphin HomeBase - 11.0 oz. (313g) Dolphin eBase - 11.
10 - 8
11 Dolphin QuadCharger Device Overview The Dolphin QuadCharger device is a four-slot charging station that charges up to four Li-ion battery packs in an average of 5 1/2 hours for a fully depleted battery. It takes less time if the battery has some charge. For more details about charging, see Battery Charging on page 11-2. ! We recommend use of Honeywell peripherals, power cables, and power adapters.
Power Supply Connector Use this connector to attach the power supply to the charger. The universal power supply accepts input voltages between 90–265 volts. Battery Charging Charging Process This charger charges Dolphin 6100 Li-Ion 3300mAh packs in an average of 5 1/2 hours for a fully depleted battery. It takes less time if the battery has some charge. Each charging slot works independently of the other three.
3. When the Status LED turns green, the battery in the slot has completed charging. Recommendations for Storing Batteries To maintain top performance from batteries, follow these storage guidelines: • Avoid storing batteries outside of the specified temperature range of -4 to 104°F (-20 to 40°C) or in extremely high humidity. • For prolonged storage, it is recommended that the battery be at a 40% - 50% charge level, be removed from the device, and stored in a controlled temperature environment.
Technical Specifications Structural Dimensions 7.3 in. long X 3.7 in. wide X 2.4 in. high (18.5 cm. X 9.4 cm. X 6.1 cm.) Weight 11.5 oz.
12 Dolphin 6100 Net Base Device Overview The Net Base enables up to four Dolphin 6100 mobile computers to communicate with a host device over an Ethernet network. In addition, the Net Base provides a second RJ45 Ethernet port for connection to an additional device such as a printer, workstation, eBase, or another Net Base. ! We recommend use of Honeywell peripherals, power cables, and power adapters.
Parts and Functions Front Panel Terminal Wells Power/Dock LED COMM LED Terminal Wells The Net Base contains four terminal wells. Each well has its own dedicated Power/Dock LED and COMM LED indicator. Place the Dolphin terminal in any one of the four wells to communicate with a host device, power the terminal, and charge the installed battery pack. The Net Base completely charges the main battery in a Dolphin terminal in 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7 battery.
Back Panel Green LED Yellow LED Two RJ45 Ethernet Ports DC Power Jack DC Power Jack Use the power cable from Honeywell that comes with the Net Base to supply power to this power jack. For more information, see Power on page 12-4. RJ45 Ethernet Ports The Net Base contains two RJ45 Ethernet ports. You can connect the Net Base to an Ethernetcompliant device to facilitate Ethernet communication to and from the terminal by plugging a standard CAT-5 Ethernet cable into one of the two Ethernet ports provided.
Bottom Panel For details on how to mount the Net Base, see Mounting the Net Base on page 12-6. Serial Number and Compliance Label MAC Address Label Power The terminal requires 12 Volts DC input for communications and battery charging; the power adapter on the power cable converts the voltage from the power source to 12 volts DC. Only the Honeywell 12V/ 8.5A power supply provided with the Net Base converts the voltage appropriately. The operating temperature range is -10° to 50°C (14° to 122°F).
Charging the Main Battery The base provides power to the Dolphin terminals and allows the charging of the main batteries in the terminals. The main battery of each terminal charges in 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery. The intelligent battery charging system incorporated into all Dolphin terminals prevents overcharging, which means that Dolphin terminals may be stored in the base indefinitely without damage to the terminals, battery packs, or the base.
4. Insert the Dolphin into one of the terminal wells. The DOCK LED for the well changes from red to green and the connection icon on the Dolphin’s title bar changes from x to . 5. By default, the DHCP server assigns a unique IP address to each of the Dolphin terminals docked in the Net Base. This IP address can be used by any application on the Dolphin terminal. Note: Instead of using the default for DHCP assigned IP addresses, the Dolphin terminal can use a statically assigned IP address.
Desk Mounting The DIN Rail (7.5 X 35 mm) slot on the bottom panel enables secure mounting on a horizontal surface. Hardware Required • 3/16 in. dia x 5/8 in. long pan head screw • 1/2 in. OD x 7/32 in. ID x 3/64 in. thick • 3/16 in. dia nut Installing the DIN Rail 1. Slide the DIN Rail into the DIN Rail slot on the bottom panel of the base. 2. Turn the base and DIN Rail right side up. 3. Then, using the appropriate nuts and bolts, secure the DIN Rail to a stable, flat horizontal surface. DIN Rail (7.
Hollow Wall Installation 1. Drill four pilot holes in the wall using a 7/8 in. drill bit. 13.78 in. [35 cm] 6.5 in. [16.5 cm] 2. 3. Wall Mount Bracket Wall Mount Holes Slide the bolt through the wall bracket, and thread the toggle nut onto the bolt. Press the ends of the toggle nut together, and insert the bolt/nut into the pilot hole until the nut clears inside wall surface. The toggle nut should spring open preventing the screw from being removed. 4.
3. Slide the washer onto the screw and tighten the nut to secure the assembly. Wall Bracket, Qty. 1 Screw, Qty. 2 Washer, Qty. 1 DIN Rail, Qty. 1 Nut, Qty. 1 Washer, Qty. 1 Nut, Qty. 1 4. Remove the rubber feet on the bottom of the Net Base. 5. Slide the base onto the DIN Rail using the slot on the bottom of the base.
12 - 10
13 Customer Support Technical Assistance If you need assistance installing or troubleshooting your device, please contact us by using one of the methods below: Knowledge Base: www.hsmknowledgebase.com Our Knowledge Base provides thousands of immediate solutions. If the Knowledge Base cannot help, our Technical Support Portal (see below) provides an easy way to report your problem or ask your question. Technical Support Portal: www.hsmsupportportal.
FROM A CLAIM BASED ON CONTRACT, WARRANTY, TORT, OR OTHERWISE) EXCEED THE ACTUAL AMOUNT PAID TO HII FOR THE PRODUCT. THESE LIMITATIONS ON LIABILITY SHALL REMAIN IN FULL FORCE AND EFFECT EVEN WHEN HII MAY HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH INJURIES, LOSSES, OR DAMAGES. SOME STATES, PROVINCES, OR COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
Honeywell Scanning & Mobility 9680 Old Bailes Road Fort Mill, SC 29707 www.honeywellaidc.
