Honeywell THE POWER OF CONNECTED • Home Go to your HVAC system. It may be located in your attic, crawl space or basement. Turn the power off at the breaker box or control switch for your HVAC* system. Open HVAC system's cover to reveal the control board. CWIRE ADAPTER Installation Guide Switch Breaker box * Heating, ventilation, and air conditioning Online Guides and Support customer.honeywell.com D a • Take a picture of the wires on the control board.
e 1N3V'Jdlnt>3 Insert the wires you just disconnected into the C Wire Adapter terminals. Wires ,---, Termina ls ,---, G C y K R • Mount C Wire Adapter inside the furnace using included mount and adhesive pad. Confirm you have labelled ALL of your wiring. EXAMPLE Disconnect the wires from the old wall plate. W- - - - w THERMOSTAT R D This will convert the G and Y-wires into C and K-wires. e D NEXTSTEPS .!!I ~ 1,~,--~, Take a picture of the wires you inserted into the C Wire Adapter.
Honeywell I Home TS+ Wi-Fi Thermostat Programmable Thermostat Quick Install Guide For more information visit yourhome.honeywell.
Included in your box: • • • • • • • • • • • • • • • • • •••••••Qui ck Install Guide UWP™• • • • • • • • • • • • • Mounting System • • •••••••TS Wi-Fi Thermostat (UWP) C-\tVire Power Adapter • • • • • • • • • • • • • • (Located under thermostat. Open end of box to remove it.
Get the most from T5 Wi-Fi Thermostat Multiple programming options that fit your lifestyle: f';;\.. 1. Location-Based scheduling - The thermostat uses your smartphone's ~ location to know when you're away, and saves you energy. Through geofence technology, it senses your return and helps make you comfortable upon arrival. You can always manually change your preset Home and Away temperature either on the thermostat or on the Honeywell Home app. 2.
Tools you will need: Smartphone To install your thermostat and photograph existmg wiring. (f-=::-5:::]____~ii>Phillips screwdriver D~==~•::;J G __ Small flat head screwdri ver I, ,,.... 0 Pencil ) Level Home Wi-Fi Password Honeywell Home app To configure your system and connect to your smartphone.
A A A A CAUTION: ELECTRICAL HAZARD Can cause electrical shock or equipment damage. Disconnect power before beginning installation. CAUTION: EQUIPMENT DAMAGE HAZARD Compressor protection is bypassed during testing. To prevent equipment damage, avoid cycling the compressor quickly. CAUTION: MERCURY NOTICE If this product is replacing a control that contains mercury in a sealed tube, do not place the old control in the trash.
Removing your old thermostat 1 A Turn power OFF To protect yourself and your equipment, Turn off the power at the breaker box or switch that controls your heating/ cooling system. OFF Switch Breaker box 2 Check that your system is off Change the temperature on your old thermostat. If you don't hear the system turn on within 5 minutes, the power is off. Note: If you have a digital thermostat that has a blank display, skip this step.
4 Make sure there are no 120/240V wires Do you have thick black wires with wire nuts? Is your thermostat 120V or higher? If you answered yes to either of these queslions, you have a line voltage system and the thermostat will not work. If you are unsure visit: yourhome.honeywell.com/support 5 Wire nut Thick black wire Take a picture of how your wiring looks right now Be sure to include the letters next to the terminals where the wires are inserted.
7 8 Record if you have wires in the following te rminals Do not include jumpers as a part of your count. The thermostat does not need jumpers. Terminal DR □ □ Wire Color RH Re Write down the color of the wires Check mark the wires that are connected to terminals. Next to the check mark. write down the color of the wire. Do not include jumpers as a part of your count.
9 Do you see a wire conn ected to the C terminal? If yes, skip to step 10. If you do not see a C wire , proceed with the options below: Option A - Finding the C- Wire: There might be an extra wire pushed into the wall or wrapped around the wire bundle. Gently pull tl,e wire bundle out of the wall to check for unused wires. If you have an unused wire, connect that wire to the C terminal on your new thermostat in step 13.
Installing your T5 Wi-Fi Thermostat • fJ===>► • TS Wi-Fi Thermostat Screws UWP Mounting System 10 Anchors • Wall
11 Bundle and insert wires through the UWP Pull open the UWP and insert the bundle of wires through the back of the UWP. Make sure at least 1/4-inch of each wire is exposed for easy insertion into the wire terminals. 12 Insert the wall anchors It is recommended that you use the wall anchors included in the box to mount your thermostat. You can use the UWP to mark where you want to place the wall anchors. a) Level the wall plate. b) Mark the location of the wall anchors using a pencil. Drill the holes.
13 Set R-switch position and insert R- wire or wires Set the R-switch up or down based on your wiring notes in Step 7. A Insert wires into the inner holes of the terminals on the UWP. The tabs will stay down once the wire is inserted. If you have 1 R- wire (R, Rh, or Re) 1. Set R- switch to the up position. Insert your R- wire CR, Rh or Re) into R-terminal. or If you have 2 R- wires (R or Rh, and Re) 1. Set R-switch to the down position. ~ -□ 12 2. Insert your Re wire into Re-terminal. 3.
14 Connect remaining wires from Step 8 Tip: Do not mount the UWP to the wall prior to connecting the wires. This wiring is just an example, actual wiring may vary. 10\ Depress the tabs to put the wires into the inner holes of their corresponding terminals on the UWP (one wire perterminal) until it is firmly in place. Gently tug on the wires to verify they are secure. Tip: If you need to release the wires again.
Attach your thermostat Align the thermostat onto the UWP and firmly snap it into place. jo j. - j- --.. -- -- -- 0 0 0 0 0 0 0 0 ©) o 17 Turn your power ON Turn on the power at the breaker box or switch that controls the heating/ cooling system. □@ ON ~ OFF Switch Breaker box 18 Return to the thermostat Return to the thermostat. Confirm the screen shows START SETUP. If it does, continue to "Setup with Honeywell Home App" on page 15.
Setup with Honeywell Home App 2 Select to setup with the app Touch Yes on the USE APP screen. 1 Start Setup with the app Touch STARTSETUP on the, mos tat. 3 Your thermostat is now ready to be configured using the Honeywell Home app a.) Download the "Honeywell Home" app from the App store or Google play. b.) Open the Honeywell Home app. Your thermostat should appear under Thermostat Found. Tap SET UP NOW as shown below to continue. If your thermostat doesn't appear.
How to use your Honeywell Home App • < ~·. Thermostat 72 . Access th0 menu 0 fOU.CJMN!,SOIEDUU •••••••••••••• t • (v r, • ~ • Setdes11ed tefllperature Sel c t Fc1,, mode • • • ••••••••••• Auto/On/( ,rculare Sc/c>ct Syst1:m • • • • ,1,odc Auto/Heat/ CooltOfflEM Heat • It • • • * • • • • ~ liil • • • • • • Scheclr 1/e yow home comfL1,t 0 Interested in more Honeywell products? Visityourhome.honeywell com to learn about all available products connected by the Honeywell Home App.
How to use your T5 Wi-Fi Thermostat Desired temperature Indoor Temperature Adjust temperature Displays desired indoor temperature. Displays current indoor temperature. Touch+ or - to set your desired indoor temperature . • • • • • • • • • • • • •• • • •• • • • •• • •• • • • •• • • • • •• • • • • • • • • • • •• • • ••••• • ••• • • ••••••••••• •• •• • • • • •• • • • • • • Mode Menu ••••• Fan Select system mode Auto/Heat/Cool/Off/ EM Heat (emergency heat).
Manual Setup If your Wi-Fi network is not working, you can alternatively setup your thermostat manually and connect your phone later. 1 Start manual setup Touch START SETUP to begin. 2 Select manual setup On the USE APP screen, touch No. 3 Navigate and edit setup options Use < or > to navigate through all the setup options. To see a list of all setup options. go to pages 20-21. rn1111,[ I111 ·,· .lTn~ 1R1 UI II L LUI ~Li ~ To edit an option value, touch Edit or touch text area.
Manual Setup (cont.) 4 Finish Setup Touch > until you see Finish Setup. Touch Select or touch text area. 5 Setup Wi-Fi At the end of setup process you will be prompted to SETUP WIFI. If your Wi- Fi is still not working, you have to manually set the time and date. Select No on the SETUP WIFI screen. 6 Set time and date Set daylight saving time if you are in an area that follows daylight saving time. Set date, clock format and time on the next screens.
Equipment Setup Options Option# Option Name Option Value (factory default in bold) 120 Schedule Type No Schedule MO-SU= Every day the same MO-FRSASU = 5-1-1 schedule MO-FR SA-SU= 5-2 schedule Each Day= Every day different Note: You can change default MO-FR, SA-SU schedule here. To edit periods during days, temperature setpoints, or to turn Schedule On/ Off, touch MENU from the Home screen and go to SCHEDULE.
Equipment Setup Options Option# Option Name Option Value (factory default in bold) 220 0, 1,2 221 Cool Stages/ Compressor Stages (#200=Conv./ #200=HP) Heat Stages/ Aux/E Stages (#200=Conv./ #200=HP) Note: Select how many Cool or Compressor stages ofyour equipment the thermostat will control. Maximum of 2 Cool/Compressor Stages. HeatStages:0,1,2 Aux/E stages: 0, 1 Note: Select how many Heat or Aux/E stages ofyour equipment the thermostat will control. Maximum of 2 Heat Stages for conventional systems.
Frequently Asked Questions Will the T5 Wi- Fi thermostat still work if Wi-Fi con nection is lost? Yes, the temperature can be adjusted directly at the thermostat. However, some features, including geofencing, are managed only through the Honeywell Home app and will not function while the connection is down. The thermostat will automatically reconnect to Wi-Fi once the network is restored. The T5 Wi-Fi thermostat is not finding the in home Wi- Fi network. thermostat operates in the 2.4GHz range.
Frequently Asked Questions There is an alert that says Wi-Fi Signal Lost. What does that mean? The Wi-Fi signal to the thermostat has been lost. Wait for the thermostat to reconnect or select a new network within the Honeywell Home app configuration menu. If the thermostat is unable to reconnect, you will need to troubleshoot the router to determine the cause.
Honeywell I Home Apple® HomeKit™ Setup Code The TS Wi-Fi supports Apple Home Kit. When prompted by the Honeywell Home app, scan the code on the last page (back cover) of this guide. 2-Year Limited Warranty For Warranty information go to yourhome.honeywell.com Home and Building Technologies In the U.S.: Honeywell 715 Peachtree Street NE Atlanta, GA 30308 Wi-Fi is a registered trademark of Wi-Fi Alliance yourhome.honeywell.com '' U.S. Registered Trademark. (c., 2018 Honeywell International Inc.
Wiring Labels Apply these wiring labels to each wire with the appropriate terminal designation as you remove It from the existing thermostat. atquettes de fils R6tulos para los cables Lorsque vous retirez les fils des bornes du thermostat existant, collez ces etiquettes sur chaque fil correspondant ~ la lettre de la borne. Coloque estos r6tulos, con la designaci6n de las termina les, en cada cable al remover los cables del termostato actual.
T5+ Smart Thermostat Programmable Thermostat RCHT8610WF, RCHT8612WF Following Schedule Fan Mode Product Data Heat Wake Mode Auto Away Home Sleep Menu Fan For more information visit honeywellhome.com Included in your box Quick Install Guide Screws and anchors UWP™ Mounting System (UWP) T5 Smart Thermostat C-Wire Power Adapter (Located under thermostat. Open end of box to remove it.
Read and save these instructions. Removing your old thermostat Tools you will need 1 Smartphone To install your thermostat and photograph existing wiring. Phillips screwdriver Turn power OFF To protect yourself and your equipment, Turn off the power at the breaker box or switch that controls your heating/cooling system. OFF Switch Breaker box Small flat head screwdriver 2 Pencil Home Wi-Fi Password Level ON OFF Honeywell Home app To configure your system and connect to your smartphone.
7 8 Record if you have wires in the following terminals Do not include jumpers as a part of your count. The thermostat does not need jumpers. Terminal Installing your T5 Smart Thermostat Wire Color R Rh Rc Write down the color of the wires Check mark the wires that are connected to terminals. Next to the check mark, write down the color of the wire. Do not include jumpers as a part of your count.
13 Set R-switch position and insert R-wire or wires 16 Set the R-switch up or down based on your wiring notes in Step 7. Attach your thermostat Align the thermostat onto the UWP and firmly snap it into place. ON Insert wires into the inner holes of the terminals on the UWP. The tabs will stay down once the wire is inserted. If you have 1 R-wire (R, Rh, or Rc) 1. Set R-switch to the up position. o 90 2. Insert your R-wire (R, Rh or Rc) into R-terminal.
How to use your Honeywell Home App Manual Setup If your Wi-Fi network is not working, you can alternatively setup your thermostat manually and connect your phone later. Access the menu Thermostat MY HOME 72˚ FOLLOWING SCHEDULE 1 Start manual setup Touch START SETUP to begin. 2 Select manual setup On the USE APP screen, touch No. Set desired temperature 72˚ Select Fan mode Auto/On/Circulate.
Equipment Setup Options Note: ISU options available may vary upon the thermostat model and equipment setup. # ISU 120 ISU Name Schedule Type 125 130 Temp Scale Outdoor Temp 200 System Type 205 Equipment Type ISU Options (defaults in bold) No Schedule MO-SU = Every day the same MO-FR, SA, SU = 5-1-1 schedule MO-FR, SA-SU = 5-2 schedule Each Day = Every day individual Fahrenheit, Celsius No, Internet Notes You can change default MO-FR, SA-SU schedule here.
# ISU 370 ISU Name Heat 1 CPH (Heating cycle rate stage 1) ISU Options (defaults in bold) 1 - 12 CPH 371 Heat 2 CPH (Heating cycle rate stage 2) 1 - 12 CPH 375 Aux Heat CPH (Heating cycle rate Auxiliary Heat) 1 - 12 CPH 425 Smart Response On, Off 429 Max Cool Temperature Min Cool Temperature Max Heat Temperature Min Heat Temperature Air Filters Air Filter 1 Reminder from Min. Cool Temp. to 99 °F or to 37.0 °C (90 °F or 32 °C) from 50 °F or 10.0 °C to Max. Cool Temp. (50 °F or 10 °C) from Min.
Frequently Asked Questions Will the T5 Smart Thermostat still work if Wi-Fi connection is lost? Yes, the temperature can be adjusted directly at the thermostat. However, some features, including geofencing, are managed only through the Honeywell Home app and will not function while the connection is down. The thermostat will automatically reconnect to WiFi once the network is restored. The T5 Smart Thermostat is not finding the in home Wi-Fi network. The thermostat operates in the 2.4GHz range.
Apple® HomeKit™ Setup Code The T5 Smart supports Apple HomeKit. When prompted by the Honeywell Home app, scan the code on the back cover of the guide included with your T5 Smart thermostat. 2-Year Limited Warranty For Warranty information go to honeywellhome.
Wi-Fi® is a registered trademark of Wi-Fi Alliance® Resideo Inc., 1985 Douglas Drive North Golden Valley, MN 55422 www.resideo.com 33-00474-01 M.S. 4-19 | Printed in United States ©2019 Resideo Technologies, Inc. This product is manufactured by Resideo Technologies, Inc., Golden Valley, MN, 1-800-633- 3991. The Honeywell Home trademark is used under license from Honeywell International Inc. All rights reserved.
A ATTENTION: MERCURY RECYCLING NOTICE This product does not contain mercury. However, this product may replace a product that contains mercury. Mercury and products containing mercury should not be discarded in household trash. For more information on how and where to properly recycle a thermostat containing mercury in the United States, please refer to the Thermostat Recycling Corporation at www.thermostat-recycle.org.
Honeywell STOP DO NOT RETURN TO STORE! CALL 1-800-468-1502. If you have installation or other product questions, contact us toll-free at 1-800-468-1502. ® U.S. Registered Trademark. 2008 Honeywell International Inc. 69-2213EFS-02 M.S.
