Install Instructions

ManualsBrandsHoneywell ManualsDamper and Valve LinkagesBonnet Adapter Kit for Johnson Globe Valves (1/2" - 3/4")

Table Of Contents

® U.S. Registered Trademark

INSTALLATION INSTRUCTIONS

62-0167

32004629-001, -002, -003, -004

Bonnet Adapter Kits

FOR Q5020 GLOBE VALVE LINKAGES

DESCRIPTION

The Bonnet Adapter Kits allow you to mount a Q5020

Globe Valve Linkage on some Seimens, Johnson, and

Siebe globe valves. Each kit consists of a bonnet adapter

and stem adapter.

INSTALLATION

When Installing this Product...

1. Read these instructions carefully. Failure to follow

them could damage the product or cause a

hazardous condition.

2. Check the ratings given in the instructions and on

the product to make sure the product is suitable for

your application.

3. Installer must be a trained, experienced service

technician.

Table 1. Valve/Adapter/Linkage Compatibility.

32004629-001 Installation

Once the old actuator is removed, proceed as follows:

1. Place stem adapter on the valve stem.

2. Tighten the set screws.

3. Place the bonnet adapter on the existing valve

bonnet.

4. Tighten the set screw.

5. Install the Q5020 according to the instructions

provided with the linkage.

Fig. 1. 32004629-001 Installation.

Valve

Series

Size (in.) Kit

See

Fig.

Linkage

Siemens

Flowrite

599

1/2 to 3 32004629-001 1 Q5020A,B

Johnson

Controls

VG7000

1/2 and

3/4

32004629-002 2 Q5020D

1 to 2 32004629-003 3 Q5020A,B,D

Siebe

VB-7000

1/2 to 2 32004629-004 4 Q5020D

M17575

STEM ADAPTER

VALVE STEM

SET SCREW (2)

BONNET ADAPTER

SET SCREW

62-0167.fm Page 1 Thursday, September 16, 2004 3:48 PM

Summary of content (2 pages)

PAGE 1
62-0167.fm Page 1 Thursday, September 16, 2004 3:48 PM 32004629-001, -002, -003, -004 Bonnet Adapter Kits FOR Q5020 GLOBE VALVE LINKAGES INSTALLATION INSTRUCTIONS DESCRIPTION 32004629-001 Installation The Bonnet Adapter Kits allow you to mount a Q5020 Globe Valve Linkage on some Seimens, Johnson, and Siebe globe valves. Each kit consists of a bonnet adapter and stem adapter. INSTALLATION STEM ADAPTER When Installing this Product... 1. 2. 3. Read these instructions carefully.
PAGE 2
62-0167.fm Page 2 Thursday, September 16, 2004 3:48 PM 32004629-001, -002, -003, -004 BONNET ADAPTER KITS 32004629-002 and -004 Installation Once the old actuator is removed, proceed as follows: 1. Thread the bonnet adapter onto the valve until it bottoms out on the valve. 2. Thread the stem adapter onto the valve stem until it bottoms out. 3. Install the Q5020 according to the instructions provided with the linkage. STEM ADAPTER BONNET ADAPTER VALVE STEM STEM ADAPTER M17577 Fig. 4.