Datasheet

ManualsBrandsHONEYWELL ManualsSensorsPosition sensor Solder pins

Installation Instructions for the

ISSUE 1

2SS52M Series Magnetoresistive Position

Sensors

PK 80077

HONEYWELLSensing and Control

WARNING

PERSONAL INJURY

• DO NOT USE these products as safety or

emergency stop devices, or in any other

application where failure of the product could

result in personal injury.

Failure to comply with these instructions could

result in death or serious injury.

OPERATING MODE

2SS52M Series are operated by magnetic fields

(North or South) parallel to the sensor package.

NOTICE

Due to the inherently high sensitivity of the

2SS52M, stray magnetic fields parallel to the IC

may affect operation.

SOLDERING/ASSEMBLY

Leads must be adequately supported during any

forming/shearing operation to ensure that the leads

are not stressed inside the plastic case. Recom-

mended PC board wave soldering temperature is

250 to 260°C (482 to 500°F) for 3 seconds

maximum.

ABSOLUTE MAXIMUM RATINGS*

Supply voltage 3.8 to +30 VDC

Voltage externally +24 VDC max. (OFF cond. only)

applied to output -0.5 VDC min. (OFF or ON cond.)

Output ON current 20 mA max.

Temperature -40 to +150°C (-40 to +302°F)

Magnetic flux No limit. Circuit cannot be

damaged by magnetic overdrive.

* Absolute maximum ratings are the extreme limits that

the device will withstand without damage to the device.

However, the electrical and mechanical characteristics

are not guaranteed as the maximum limits (above

recommended operating conditions) are approached, nor

will the device necessarily operate at absolute maximum

ratings.

ELECTRICAL SPECIFICATIONS over 3.8 to 30 VDC and -40 to +150°C unless otherwise noted

Typ. Max. Remarks

Supply Current (without load)

at 25°C, with 16V supply

6 mA 11 mA

10 mA

Max. operated

Max. released

Output Voltage (operated) 0.25 V 0.40 V Sinking 20 mA max.

Output Leakage Current (released) 10 µA Leakage into sensor output

Output Switching Time Rise

Fall

0.2 µs

0.1 µs

1.5 µs

10 to 90%, 1600 Ω, 20 pF load

90 to 10%, 1600 Ω, 20 pF load

MAGNETIC CHARACTERISTICS over 3.8 to 30 VDC Supply Voltage

Temperature Range Max. Operate Min. Release Max. Differential

-25 to +85°C (-13 to +185°F) 25 gauss 5 gauss 7 gauss

-40 to +150°C (-40 to +302°F) 25 gauss 4 gauss 8 gauss

Summary of content (4 pages)

PAGE 1
Installation Instructions for the 2SS52M Series Magnetoresistive Position Sensors WARNING PERSONAL INJURY • DO NOT USE these products as safety or emergency stop devices, or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. OPERATING MODE 2SS52M Series are operated by magnetic fields (North or South) parallel to the sensor package.
PAGE 2
SS52M Series ISSUE 1 PK 80077 MOUNTING DIMENSIONS (for reference only) Tape styles T2 and T3 are available in ammo style package.
PAGE 3
2SS52M Series ISSUE 1 PK 80077 INTERFACE DIAGRAMS NPN (CURRENT SINKING) OUTPUT For application help: call 1-800-537-6945 Honeywell • Sensing and Control 3
PAGE 4
2SS52M Series WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective.