Models 2116-2120 DIGITAL STEEL FIRE & SECURITY SAFE Read this manual carefully and never store it inside the safe!
Models 2116-2120 Digital Steel Fire & Security Safe PACKAGE CONTENTS DO NOT RETURN SAFE TO STORE! 1 – Digital Steel Fire & Security Safe 1 – Operation Manual 2 – Entry Keys 1 – Emergency Override Key 4 – “AA” Batteries 1 – Silica Gel Pack For missing parts or difficulty operating your safe, please contact our Consumer Assistance Department by telephone. Store will not accept returned products without prior authorization. You must first contact our consumer assistance department.
SETUP & OPERATION STEP 1: INSTALL BATTERIES For your convenience, we have included 4 “AA” Batteries that provide the power for the electronic controls. These must be installed before using your safe. 1. 1. Remove the battery compartment cover located on the right side of the control panel by pushing in and to the right. 2. Install the 4 “AA” batteries in the battery compartment as illustrated on the inside of the compartment. 2. 3. If the batteries are put in correctly, the safe will 3.
SETUP & OPERATION STEP 2: SET CALENDAR AND CLOCK Once batteries are installed and the control pad is powered, the next step is to begin by programming the clock and calendar. READ ENTIRE DIRECTIONS AND WRITE DOWN DATE/DAY/TIME BEFORE PROGRAMMING. NOTE: You must enter all information without delays. If the light goes off, you must begin programming again. 1. With the safe door closed and locked, press the “” key followed by the “9” key. The LCD readout will glow amber. 1. EXAMPLE 2.
SETUP & OPERATION STEP 3: UNLOCK AND OPEN THE SAFE This safe is equipped with a dual digital/key lock system that requires entering an active user code to unlock it and an entry key to open. It allows for two separate reprogrammable active user codes. The preset factory user codes are “1 2 3 4” and “1 2 3 4 5 6”. 1. Begin by inserting the entry key into the cylindrical key hole on the left side of the control panel. 2. Turn the key to the left (counter clockwise) as far as it will go. 1. 2. 3.
SETUP & OPERATION STEP 4: PROGRAM NEW USER CODES SECURITY NOTE: To insure privacy, this procedure should be repeated for both of the factory pre-set codes 1. Unlock the safe with the first factory pre-set (or 1. current active) code. 2. If correct code is entered, “OPEN” will appear on the LCD panel, and you will hear a chime tone indicating the safe is unlocked. 3. Immediately enter “” then a new 4-8 digit code followed by the “#” key.
SECURITY FEATURES PRIVACY MODE: If you wish to prevent your personal code from being read on the digital readout, it can be hidden from view by inserting the “” after “#”. Example: “# 1 2 3 4 #”. INCORRECT CODE ENTRY: If an incorrect code is entered, the word “ERROR” will appear on the digital readout and an alert tone will sound. At this time, reenter the correct code. SECURITY LOCKOUT PERIOD: If an incorrect code is entered (3) times, the system will enter lockout mode for 5 minutes.
SECURITY FEATURES HISTORICAL ENTRY DATA RETRIEVAL This safe has the ability to record into memory up to 50 entry records of those gaining access to the safe. To retrieve this data, do the following: Enter user code 1 or user code 2 and display will read “OPEN”. Immediately press “0” to view history beginning with the most recent event. To view previous events, continue pressing “0” to view up to 50 entries.
EMERGENCY ACCESS If you have forgotten your personal access code or the electronic lock is not functioning properly, you can use the Emergency Override Key to gain access. Insert the emergency override key and turn to the right. LOST COMBINATIONS / REPLACEMENT KEYS The following information is required to order replacement combinations and keys: 1.
LIMITED WARRANTY LH Licensed Products, Inc., (“LHLP, Inc.”) warrants that for a period of seven (7) years from the date of purchase, this product will be free from structural or mechanical defects resulting from materials or workmanship. LHLP, Inc., at its sole option and as the purchaser’s sole remedy under this warranty, will repair or replace this product or any component of the product found to be defective during the warranty period.
Manufactured by LH Licensed Products, Inc. 860 East Sandhill Avenue Carson, CA 90746 The Honeywell Trademark is used under license from Honeywell International Inc. Honeywell International Inc. makes no representations or warranties with respect to this product. REV.
