Product Info

PRODUCT DATA
Commercial Touchscreen Thermostat
CONNECTED DEVICE FOR COMMERCIAL BUILDINGS
Trademark Information
TBD
Disclaimer
All images used in this document are for illustrative
purposes only and may not match the actual product.
APPLICATION
TC500A-N/TC500B-NThermostat is an advanced,
configurable, connected device for commercial buildings.
It controls and monitors RTU, AHU, Heat Pump equipment,
and their configurations. This device communicates over
Wi-Fi, Bluetooth, BACnet IP, Sylk, easily integrates with the
building automation system.
The built-in intelligent control algorithms of the device
help to achieve the perfect balance between Energy
Efficiency and Comfort. The device is packaged with
numerous presets suitable for most commercial building
requirements that enable the easy and quick initial setup.
The firmware of the device can be upgraded via Wi-Fi
network. The device has four universal terminals and a
pair of Sylk terminals to connect with sensors or other
accessories. It also has a built-in temperature sensor,
humidity sensor, and proximity sensor.
FEATURES
The device can be easily commissioned through Deploy
app after connected to Gateway.
Easily customizable and intuitive UI.
Supports BACnet system schedule and holiday
configuration.
Multiple, configurable, levels of user privilege access
for features such as Reminders, Occupancy set points,
Date/Time, Schedules, Calendars of special events,
remote and local Manual Override, remote and local
Occupancy Override, Choice of language and units, and
so on.
Multiple, configurable, screen lockouts to prevent
unauthorized settings changes.
High level control algorithms such as Auto Changeover,
Adaptive Intelligent Recovery, Pre-occupancy Purge,
Power up disable time, Freeze protection, and Demand
limit controls are supported.
Settings to switch Fahrenheit to Celsius and vice-versa.
Auto display sleep to save energy when there is no user
action for configured time out.
A LED indicator to show the operational status of the
thermostat when the display goes to sleep mode.
Real-Time Clock time keeping accuracy with 72 hour
retention during power loss.
Equipment Control Features
4H/3C Heat Pump, 3H/3C Conventional and
modulating heat system
Constant speed Fan, 2-speed Fan, and Variable Speed
Fan
Packaged Economizer Coordination Output
Multiple Dehumidification and Humidification options
Service mode to manually command the outputs to test
the operation of the mechanical equipment
Auto mode to switch between heating and cooling
according to the current space temperature
Staging control, PID Tuning, CPH, OAT Lockout, DAT
Lockout, Modulating control
Demand Limit Control to save energy
System Switch Options
Smoke Monitor

Summary of content (6 pages)