Draft 8/12/11 Dolphin™ 99EX/99GX Mobile Computers with Windows® Embedded Handheld 6.
Preliminary Draft 8/12/11 Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.
Preliminary Draft 8/12/11 Table of Contents Chapter 1 - Dolphin 99EX/99GX Terminal Agency Information Laser Safety .........................................................................................................................1-1 Label Locations ..............................................................................................................1-1 Address/Serial Number Label ........................................................................................1-1 Laser Safety Label ...
Preliminary Draft 8/12/11 Chapter 3 - Hardware Overview Standard Configurations...................................................................................................... 3-1 Peripherals for the 99EX and 99GX .................................................................................... 3-2 Accessories for the 99EX and 99GX ................................................................................... 3-4 Front Panel: 99EX and 99GX ......................................................
Preliminary Draft 8/12/11 Chapter 6 - Using the Keyboards Available Keyboards............................................................................................................ 6-1 Keyboard Combinations ................................................................................................ 6-1 Common Buttons ........................................................................................................... 6-1 Using the Function Keys.................................................
Draft 8/12/11 Using the IrDA Port.............................................................................................................. 8-2 IrDA Port Location ......................................................................................................... 8-2 Sending Data ................................................................................................................. 8-2 Receiving Data .........................................................................................
Preliminary Draft 8/12/11 Chapter 10 - Working with the Bluetooth Radio Enabling the Bluetooth Radio ............................................................................................ 10-1 Pairing and Trusted Devices ............................................................................................. 10-2 Connecting to Other Bluetooth Devices ............................................................................ 10-2 Transferring Files................................................
Preliminary Draft 8/12/11 Power ................................................................................................................................ 13-5 Connecting Power to the eBase .................................................................................. 13-5 Charging the Main Battery................................................................................................. 13-6 To Power a Terminal and Charge its Main Battery.....................................................
Preliminary Draft 8/12/11 Power ................................................................................................................................ 16-4 Connecting Power to the Net Base.............................................................................. 16-4 Charging the Main Battery................................................................................................. 16-5 To Power a Terminal and Charge its Main Battery......................................................
Preliminary Draft 8/12/11 x
Preliminary Draft 8/12/11 1 Dolphin 99EX/99GX Terminal Agency Information Dolphin 99EX and 99GX mobile computers meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency guidelines that follow. Read these guidelines carefully before using your Dolphin terminal.
Preliminary Draft 8/12/11 Laser Safety Statement This device has been tested in accordance with and complies with IEC60825-1(Ed. 2.0), EN608251:2007. Complies with 21 CFR 1040.10 and 1040.11, except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. LASER LIGHT, DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT, 1.0 mW MAX OUTPUT: 650nm, pulse duration of 15.5msec.
Preliminary Draft 8/12/11 R&TTE Compliance Statement—802.11a/b/g/n, Bluetooth, and/or GSM Dolphin RF terminals are in conformity with all essential requirements of the R&TTE Directive (1999/5/ EC). This product is marked with in accordance with the Class II product requirements specified in the R&TTE Directive. In addition, this product complies to 2006/95/EC Low Voltage Directive when supplied with the recommended power supply. Honeywell shall not be liable for use of our product with equipment (i.e.
Preliminary Draft 8/12/11 If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful: “Something About Interference.” This is available at FCC local regional offices.
Preliminary Draft 8/12/11 The FCC has granted IMPORTANT NOTE: an Equipment Authorization for this model phone with all reported SAR levels IC Radiation Statement evaluated as Exposure in compliance with the FCC RF exposure guidelines. SAR information on this model phone This EUT is compliance with SAR general exposure limits in IC RSS102 and is on file with the FCC and can be for found underpopulation/uncontrolled the Display Grant section of www.fcc.
Preliminary Draft 8/12/11 Waste Electrical and Electronic Equipment Information This product has required the extraction and use of natural resources for its production. It may contain hazardous substances that could impact health and the environment, if not properly disposed. In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate takeback systems for product disposal.
Preliminary Draft 8/12/11 2 Getting Started Out of the Box Verify that the carton contains the following items: • Dolphin mobile computer (the terminal) • Main battery pack • Quick Start Guide If you ordered accessories for your terminals, verify that they are also included with the order. Be sure to keep the original packaging in the event that the Dolphin terminal should need to be returned for service. For details, see Product Service and Repair on page 18-1.
Preliminary Draft 8/12/11 4. Replace the battery door. Apply pressure to engage the door latch. Note: The battery door must be installed prior to powering the unit. 5. Reattach the hand strap (99EX models only). Battery Error Notification If your terminal displays the following indicators, replace the main battery pack with a Honeywell new Honeywell battery pack. For information on how to remove the main battery pack from the terminal, see Replacing the Main Battery Pack on page 2-4.
Preliminary Draft 8/12/11 Using the Charging/Communication Cables Use only UL Listed power supply, which has been qualified by Honeywell with output rated at 5VDC and 3 amps with the device. ! Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty.
Preliminary Draft 8/12/11 Replacing the Main Battery Pack Note: Before replacing the main battery pack, read the Guidelines for Battery Pack Use and Disposal on page 3-14. ! Ensure all components are dry prior to placing the battery in the terminal. Mating wet components may cause damage not covered by the warranty. 1. Press the Power key to put the terminal in Suspend Mode (see page 2-11). 2. Release the hook securing the hand strap to the back panel of the terminal near the speaker. 3.
Preliminary Draft 8/12/11 Home Screen After the Dolphin terminal initializes the first time, you see the Home screen. Tap to reach the Start screen from the home screen. Tap to access the Dolphin Wireless Manager (see page 8-6) from the home screen. Title Bar The Title bar, located at the top of the screen, displays the active program, the status of various system functions, and the current time. Tapping on the title bar provides access to the Horizontal Scroll.
Preliminary Draft 8/12/11 Icons in the Title Bar Indicator Meaning New text message New voicemail New instant message Vibrate on Ringer off Speakerphone on Voice call in progress Calls are forwarded Call on hold Missed call Data call in progress A battery error has occurred. Replace the main battery pack with a Honeywell Li-poly or Li-ion battery pack.
Preliminary Draft 8/12/11 Icons in the Title Bar Indicator Meaning No active network connection GPRS available GPRS connecting GPRS in use HSDPA available HSDPA connecting HSDPA in use EDGE available EDGE connecting EDGE in use UMTS available UMTS connecting UMTS in use Radio is off The radio is not connected to a network. The radio is connected. The bars indicate the signal strength. No radio signal The terminal is searching for a signal.
Preliminary Draft 8/12/11 Horizontal Scroll The Horizontal Scroll, located at the top of most application windows, provides access to additional application screens. You can flick left or right on the scroll or tap each label on the scroll, until you get to the desired screen. Tapping a label to the left or right of the center item brings new labels into view. Note: Tap the Title bar to access the horizontal scroll if it is not visible on the screen.
Preliminary Draft 8/12/11 File Explorer You can also use the File Explorer to find files and organize these files into folders. 1. Tap > File Explorer . 2. Tap the Up button at the bottom of the screen to move up one level in the directory. 3. You can move files in File Explorer by tapping and holding on the item you want to move, then tapping Cut or Copy on popup menu. 4. Navigate to the folder you want to move the file to, then tap and hold a blank area of the window. 5.
Preliminary Draft 8/12/11 File Provisioning on the 99EX \IPSM\Honeywell The IPSM folder is the only partition on the 99EX that persists across a kernel upgrade (*.UPG file extension). During a kernel upgrade, files are automatically copied from the \IPSM\Honeywell\Autoinstall folder and then installed in the \Honeywell (root file system) folder as part of the upgrade process. \IPSM\Honeywell\AutoInstall The files in the IPSM\Honeywell\AutoInstall folder are only installed when a factory reset or kernel upgr
Preliminary Draft 8/12/11 Resetting the Terminal There are three types of system resets: a soft reset, a hard reset, or a factory reset. The soft and hard resets preserve all data stored in the file system. Contact a Honeywell technical support representative for more information on how to perform a factory reset. Soft Reset (Warm Boot) A soft reset re-boots the device and preserves any objects created in RAM. You would perform a soft reset when: • the terminal fails to respond.
Preliminary Draft 8/12/11 2 - 12
3 Preliminary Draft 8/12/11 Hardware Overview Standard Configurations WLAN & WPAN (99EX and 99GX Models) • Microsoft Windows Embedded Handheld 6.5 Classic • OMAP3715 (1Ghz) • 256MB RAM X 1GB Flash • Four keyboard options • 3.7V Li-poly standard battery pack or optional extended 3.7V Li-ion rechargeable battery pack • Adaptus Imaging Technology: N5603ER/ SR/HD or N5600ER/SR/HD image engines • 802.11a/b/g/n and Bluetooth WLAN, WPAN & Camera (99EX Models Only) • Microsoft Windows Embedded Handheld 6.
Preliminary Draft 8/12/11 WLAN, WPAN, WWAN with GPS & Camera (99EX Models Only) • Microsoft Windows Embedded Handheld 6.5 Classic • OMAP3715 (1Ghz) • 256MB RAM X 1GB Flash • Four keyboard options • 3.7V Li-poly or extended 3.7V Li-ion rechargeable battery pack • Adaptus Imaging Technology: N5603ER/ SR/HD or N5600ER/SR/HD image engines • 802.11a/b/g/n, Bluetooth, and GSM/ HSPA+ • GPS • 3.1 megapixel auto control color camera WLAN, WPAN, & WWAN (99EX Models Only) • Microsoft Windows Embedded Handheld 6.
Preliminary Draft 8/12/11 Dolphin Mobile Base™ Device The Dolphin Mobile Base device is a charging and communication cradle designed specifically for inpremise and in-transit data collection applications. It features a flexible mounting bracket and a cigarette lighter adapter to adapt it to your environment. The serial connector supports RS232 communication and power out to peripheral devices, such as handheld scanners. The USB port is client Hi-Speed 2.0v compliant.
Draft 8/12/11 Accessories for the 99EX and 99GX Each of the following items is sold separately to enhance the capabilities of your Dolphin terminal. Note: When using accessories where the terminal is worn on the body, the terminal’s touch panel must face away from the body. Dolphin Mobile Charger The Dolphin Mobile Charger is a charging cable that connects the terminal directly to a 12 Volt DC power source, such as a cigarette lighter port inside a vehicle, eliminating the need for a cradle.
Preliminary Draft 8/12/11 Battery Pack The rechargable battery pack provides the main power for the terminal. For more information, see Batteries on page 3-13. Front Panel: 99EX and 99GX Note: Your Dolphin model may differ from the models illustrated; however, the features noted are standard for all 99EX and 99GX models unless otherwise noted.
Preliminary Draft 8/12/11 Front Panel Features for the 99EX and 99GX Blue Modifier Key See Using the Modifier Keys on page 6-3. Front Speaker The front speaker is the receiver for handset voice calls. See GSM/HSPA+ Global Radio Dolphin Models on page 9-5. General Notification LED The light emitting diode (LED) located above the top right corner of the LCD display flashes and illuminates during resets, scanning/imaging, and taking a picture. This LED can be programmed by various software applications.
Preliminary Draft 8/12/11 Touch Panel Display The color 3.7 inch liquid crystal display (LCD) touch panel is covered with an industrial, protective lens for greater durability. The video graphic array (VGA) display resolution is 480 X 640. The color LCD (16 bit RGB) uses thin film transistor (TFT) technology. The touch panel backlight illuminates when the screen is touched, but not when the Backlight key is pressed. For more information, see Backlight on page 7-9.
Draft 8/12/11 Back Panel Features for the 99EX and 99GX Battery Door The battery door secures the Li-ion or Li-poly battery pack in the terminal’s battery well. For information on how to remove the battery, see Replacing the Main Battery Pack on page 2-4. Color Camera (99EX Only) The 3.1-Megapixels Resolution color camera provides easy picture capture with Automated Camera Control (ACC). Additional features include automated picture profiles and an Application Programming Interface (API).
Preliminary Draft 8/12/11 Scan Trigger (99GX Only) The back panel of the 99GX contains an integrated, handle for a more ergonomic grip in scanintensive applications. Press the scan trigger to activate the imager/scanner. Stylus Slot The stylus is used to operate the touch panel. The back panel of the terminal features a storage slot to hold the stylus when not in use. The stylus features a special tip for added accuracy and ease of use.
Preliminary Draft 8/12/11 Rear Speaker Handle (99GX Only) Scan Trigger (99GX Only) Lanyard Strap (99GX Only) Handle (99GX Only) The handle is integrated into the back panel of the terminal and is ergonomically designed to be comfortable through repetitive scans. Right Button By default, the Right Button triggers the scanner/imager. You can reassign the button to launch applications or execute commands. For additional information, see Changing Button Assignments on page 7-4.
Preliminary Draft 8/12/11 Bottom Panel: 99EX and 99GX Pin Description 1 GND 2 GND 3 USBC_DET 4 USBC_D- 5 RTS 6 USBC_D+ 7 DTR 8 SPK 9 Audio_GND 10 MIC 11 CTS 12 USBH_D- 13 5V_OUT 14 USBH_D- 15 TXD 16 RXD 17 VCC 18 VCC 2 4 6 8 10 12 14 16 18 1 3 5 7 11 13 15 17 9 Note: Signals referenced are for a DTE device. I/O Connector The I/O connector powers the terminal, charges the main battery, and facilitates communication.
Preliminary Draft 8/12/11 Using the Touch Panel Honeywell defines proper use of the terminal touch panel as using a screen protector and proper stylus. Screen protectors maintain the ongoing integrity (i.e., prevent scratching) of the touch panel, which is why their use is recommended for applications that require a high to medium level of interface with the touch panel, such as signature capture for proof of delivery. Honeywell advocates the use of screen protectors on all Dolphin devices.
Preliminary Draft 8/12/11 • • • • • • Isopropyl Alcohol wipes (70%) CaviWipes™ Virex® 256 409® Glass and Surface Cleaner Windex® Blue Gentle dish soap and water Batteries There are three types of battery power: the main battery pack installed in the back panel, the backup battery located inside the terminal and the Real Time Clock (RTC) battery located inside the terminal. They are designed to work together to prevent data loss when the terminal is in use over long periods.
Draft 8/12/11 Battery Error Notification If your terminal displays the following indicators, replace the main battery pack with a Honeywell Li-poly or Li-ion battery pack. For information on how to remove the main battery pack from the terminal, see Replacing the Main Battery Pack on page 2-4. • appears in the Title bar at the top of the touch screen. • The General Notification LED flashes red. • A Notification appears on the Tile bar at the bottom of the touch screen.
Preliminary Draft 8/12/11 • Although your battery can be recharged many times, the battery life is limited. Replace it after the battery is unable to hold an adequate charge. Internal Backup Battery Located inside the terminal is a 3.6 Volt nickel metal hydride (NiMH) backup battery. The backup battery prevents the terminal from being reset if you need to replace the main battery pack. It retains RAM data during the battery pack exchange. A fully charged backup battery provides 30 minutes of backup time.
Preliminary Draft 8/12/11 There are two DWORD values in this registry entry: MedState and LowState. The default values for these entries are as follows: MedState=25% This sets the Low Battery point to 25%. When the battery hits the percentage charge specified here, the user is notified. LowState=10% This sets the Critical Battery point to 10%. When the battery hits the percentage charge specified here, the user is notified. Note: Warnings do not appear when the terminal is on external power.
Preliminary Draft 8/12/11 Hardware Maintenance When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free cloth. The terminal can be cleaned with a damp cloth. For additional information on hardware maintenance specific to the Dolphin Healthcare Housings, see page 3-12.
Draft 8/12/11 Installing a Memory Card 1. Press the Power key to put the terminal in Suspend Mode. 2. Release the hand strap hook near the speaker on the back panel of the terminal. 3. Remove the battery door. 4. Wait at least 3 seconds, and then remove the battery. 5. Remove the T6 TORX® screw securing the protective door closed. 6. Lift up the lower left corner of the door to access the memory socket. 7.
Preliminary Draft 8/12/11 4 Using the Scan Image Engine Overview The Dolphin terminal houses a compact image engine that instantly reads popular 1D and 2D bar codes and supports omni-directional aiming and decoding for greater flexibility in real-world settings. The image engine can also capture black and white digital images, such as signatures and pictures of damaged inventory.
Preliminary Draft 8/12/11 Depth of Field The depth of field measurements used the following parameters: • Distances are measured from the front of the engine. • +23°C (+73°F), 0 lux • Photographic quality codes Focus N5603/N5600 High Density (HD) Symbology Distance (in/cm) Near Far 3 mil C39/128 2.0 (5.1) 3.4 (8.6) 5 mil C39/128 1.4 (3.6) 7.5 mil C39/128 Delta (in/cm) N5603/N5600 Standard Range (SR) N5603/N5600 Extended Range (ER) Distance (in/cm) Distance (in/cm) Near Far 1.4 (3.
Preliminary Draft 8/12/11 10 mil QR 3.3 (8.4) 5.0 (12.7) 1.7 (4.3) 2.2 (5.6) 7.1 (18.0) 4.9 (12.4) 4.3 (10.9) 10.6 (26.9) 6.5 (16.5) 20 mil QR 2.2 (5.6) 7.9 (20.1) 5.7 (14.5) 2.2 (5.6) 15.5 (39.4) 13.3 (33.8) 2.4 (6.1) 19.6 (49.8) 17.6 (44.7) 32 mil Maxicode 2.4 (6.1) 8.6 (21.8) 6.2 (15.7) 2.5 (6.4) 17.0 (43.2) 14.5 (36.8) 3.9 (9.9) 23.2 (58.9) 19.5 (49.
Preliminary Draft 8/12/11 Decoding The terminal supports two types of image decoding for use in various bar code reading and imaging applications: full-area imaging and Advanced Linear Decoding (ALD). Full-Area Imaging Full-area imaging provides omni-directional reading of linear and non-linear 1D and 2D bar codes, OCR, signature capture, and picture taking. When reading all bar code types using full-area imaging, a positive read can be obtained from many positions; see Aiming Options on page 4-5.
Preliminary Draft 8/12/11 Aiming Options The aiming beams are smaller when the terminal is held closer to the code and larger when it is farther from the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas symbologies with larger bars or elements (mil size) should be read farther from the unit. N5603 Red High-Vis Aiming Pattern If your Dolphin terminal is configured with a 5603 imager, high-vis aimers frame the bar code for more intuitive aiming.
Preliminary Draft 8/12/11 Capturing Images The image-capture process is an intuitive, split-second operation for experienced users. By following the basic guidelines, new users can easily develop their own technique and, with practice, quickly learn to adapt it to different application environments. Image Preview When the imaging process is initiated, the touch screen displays a preview of the object. This is a live video image of what the imager is currently viewing.
Preliminary Draft 8/12/11 4. The touch screen displays a preview of the object, and the decode and scan LEDs light red. 5. Adjust the terminal’s position until the object appears on the screen the way you want it to appear in the image. 6. Hold the terminal still and release the SCAN key, trigger or side button. The scan and decode LEDs flash red, the screen flashes, and the captured image appears on the screen. 7. Unless otherwise specified by the application in use, the image is saved to the \My De
Preliminary Draft 8/12/11 4-8
Preliminary Draft 8/12/11 5 Using the Color Camera Overview Dolphin 99EX terminals equipped with a 3.1-Megapixels Resolution color camera with Automated Camera Control (ACC), and an Application Programming Interface (API) provide easy integration of color picture and video capture into business applications. The camera lens and camera flash are located on the back panel of the terminal. Note: The following feature is not supported in Dolphin 99GX models. Taking a picture using the Camera Demo tool 1.
Preliminary Draft 8/12/11 Options Tap Options > Camera. The Camera Options menu appears. There are five tabs of configurable options accessible from the Camera Options menu. Profile Tab Display Tab The profile tab allows you to customize your camera settings, or chose from several predefined profiles designed to provide the best picture quality for common tasks. Capture Tab Caption Tab File Tab Taking a picture using the Windows Embedded Handheld 6.5 Camera tool 1. Tap 2.
Preliminary Draft 8/12/11 Menu Tap Menu on the Command Bar to adjust the camera settings, switch to video mode, and access additional camera options. Item Descriptions Video Activate Video Mode Mode Set Mode (i.e., Normal, Burst, or Timer) Resolution Set Picture Resolution (i.e., QVGA, VGA, SVGA, XGA, UXGA, or QXGA) Zoom Set Zoom (i.e.
Preliminary Draft 8/12/11 5-4
Preliminary Draft 8/12/11 6 Using the Keyboards Available Keyboards There are four keyboard options in the 99EX series: 34-Key Alpha/Numeric Keyboard SEND END ESC SEND SCAN TAB VOL 2 1 4 GHI SFT PG 3 ABC 0 F2 F6 - SP ; ALT CTRL DEF 7 9 WXYZ , # @ F3 F7 / BKSP : F4 F8 \ DEL — ALPHA PG 8 ABC SFT 9 5 JKL * 0 F2 F6 - SP ; DEF 6 MNO 2 TUV 1PQRS F1 F5 + ENT VOL 4 GHI . ☼ 3 WXYZ , # @ F3 F7 / BKSP : ALT CTRL F4 F8 \ DEL — ALPHA ESC SCAN TAB A + F1 F
Preliminary Draft 8/12/11 Using the Function Keys Name Key Function Backlight Turns the keyboard backlight on and off. ☼ Flashlight ☼ Turns the flashlight on and off. The flashlight is located on the back panel of the terminal. Note: The flashlight function is disabled on all 99GX models. BKSP : 34-Key Moves the cursor back one space each time the key is pressed. If you are typing text, it deletes the previous character each time it is pressed.
Preliminary Draft 8/12/11 Using the Modifier Keys Name Key Function ALPHA ALPHA 34-Key The blue and red keys are used in combination with other keys to type special characters and perform system functions. Each key modifies only the next key pressed. Blue and Red Blue Each keyboard is color-coded to indicate the character typed or function performed when specific keys are pressed immediately after the blue or red modifier key.
Draft 8/12/11 Key Function & PG Moves the cursor down one page. Red Moves the cursor one character to the right. Moves the cursor one character to the left. Note: Additional functionality varies according to the application in use.
Preliminary Draft 8/12/11 34-Key Alpha/Numeric Keyboard SCAN key Left Navigation\SEND key Right Navigation\END key SEND Escape key END ESC Tab key SCAN TAB VOL ☼ ENT PG Up Navigation key Backlight\Flashlight key Enter key Down Navigation key 1 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO ALPHA Mode keys 7PQRS . * Space key F1 + F5 Shift key SFT 9 WXYZ 0 , # - SP ; A LT CTRL Power key CTRL\ALT key Note: The flashlight function ( F2 F6 8 TUV Red key @ F3 F7 / BKSP : F4 F8 \ Backs
Preliminary Draft 8/12/11 34-Key Alpha/Numeric Keyboard Combinations Key NUM (Default) Shift-NUM ALPHA ShiftALPHA Blue Red ESC Escape Left Left Left Left Left Send (Phone) Left Scan Scan Right Right Right Right Right End (Phone) Right Backlight Toggles Keyboard Backlight On/Off Toggles Flashlight On/Off (99EX models only) Toggles Keyboard Backlight On/ Off TAB Tab Tab Tab Tab Tab Tab Up Up Up Up Up Volume Up Prior Down Down Down Down Down Volume Down Next En
Preliminary Draft 8/12/11 Key NUM (Default) Shift-NUM ALPHA ShiftALPHA Blue Red Comma , (comma) < , (comma) < # F1 F1 F1 F1 F1 + F5 F2 F2 F2 F2 F2 - F6 F3 F3 F3 F3 F3 / F7 F4 F4 F4 F4 F4 \ F8 SFT Shift Shift Shift Shift SP Space Space Space Space ; Space BKSP Backspace Backspace Backspace Backspace : Backspace DEL Delete Delete Delete Delete Underscore Delete Power Off/On CTRL Control Control Menu Blue Blue Blue Blue Red Red Red
Preliminary Draft 8/12/11 34-Key Numeric (Calculator) Keyboard SCAN key Left Navigation\SEND key Right Navigation\END key SEND Escape key END ESC Tab key SCAN TAB VOL ☼ ENT PG Up Navigation key Enter key Down Navigation key 8 ABC 9 DEF 7 4 GHI 5 JKL 6 MNO 1PQRS 2 TUV 3 WXYZ . * Space key F1 + F5 Shift key SFT 0 F2 F6 - SP ; A LT CTRL Power key CTRL\ALT key Note: The flashlight function ( Backlight\Flashlight key Red key , # @ F3 F7 / BKSP : F4 F8 \ Backspace key
Preliminary Draft 8/12/11 34-Key Numeric (Calculator) Keyboard Combinations Key NUM (Default) Shift-NUM ALPHA ShiftALPHA Blue Red ESC Escape Left Left Left Left Left Send (Phone) Left Scan Scan Right Right Right Right Right End (Phone) Right Backlight Toggles Keyboard Backlight On/Off Toggles Flashlight On/Off (99EX models only) Toggles Keyboard Backlight On/ Off TAB Tab Tab Tab Tab Tab Tab Up Up Up Up Up Volume Up Prior Down Down Down Down Down Volume Down N
Preliminary Draft 8/12/11 Key NUM (Default) Shift-NUM ALPHA ShiftALPHA Blue Comma , (comma) < , (comma) < # F1 F1 F1 F1 F1 + F5 F2 F2 F2 F2 F2 - F6 F3 F3 F3 F3 F3 / F7 F4 F4 F4 F4 F4 \ F8 SFT Shift Shift Shift Shift SP Space Space Space Space ; Space BKSP Backspace Backspace Backspace Backspace : Backspace DEL Delete Delete Delete Delete Underscore Delete Power Off/On CTRL Control Control Menu Blue Blue Blue Blue Red Red Red ALPH
Preliminary Draft 8/12/11 43-Key Alpha/Numeric Keyboard SCAN key Left Navigation\SEND key Right Navigation\END key END SEND Escape key ESC Tab key SCAN TAB ☼ ENT PG VOL Up Navigation key A+ B 1 C 2 D 3 E F1 F F6 F2 F3 F4 G4 H 5 I 6 F7 F8 F9 Backlight\Flashlight key Enter key Down Navigation key F5 J F10 Number (NUM) Mode keys K @ F11 F13 F14 O F15 V F17 F18 W F22 F23 SP A LT CTRL CTRL\ALT key N U SFT Power key Note: The flashlight function ( M 9 Q*.
Draft 8/12/11 43-Key Keyboard Combinations Key ALPHA (Default) ESC Escape Left Left Scan Scan Right Right Backlight Toggles Keyboard Backlight On/Off TAB Tab Up Up Up Up Down Down Down Down Enter Return A a A B b B 1 ! F2 C c C 2 @ F3 D d D 3 # F4 E e E F f F G g G 4 $ F7 H h H 5 % F8 I i I 6 ^ F9 J j J K k K 6 - 12 Shift-ALPHA NUM Shift-NUM Blue Red Left Left Left Send (Phone) Left Right Right Right End (Phone) Right
Preliminary Draft 8/12/11 Key ALPHA (Default) Shift-ALPHA NUM Shift-NUM Blue Red L l L 7 & F12 M m M 8 * (multiply) F13 N n N 9 ( F14 O o O P p P Q q Q . (period) > R r R 0 ) S s S , (comma) < T t T U u U ; F21 V v V : F22 W w W _ (underscore) F23 X x X / F24 Y y Y \ F25 SFT Shift SP Space BKSP Backspace Z z Power Off/On CTRL Control Control Menu Blue Blue Blue Blue Red Red Red NUM Toggles between NUM lock mode a
Preliminary Draft 8/12/11 55-Key Full Alpha/Numeric Keyboard Left Navigation\SEND key Escape key ESC Tab key Right Navigation\END key SCAN key SCAN TAB VOL ☼ ENT PG Up Navigation key 1 2 3 BKSP 4 5 6 Backspace key DEL 7 8 9 Delete key SFT .
Preliminary Draft 8/12/11 55-Key Keyboard Combinations Key Normal Shift Blue Red ESC Escape Left Left Left Send (Phone) Left Scan Scan Right Right Right End (Phone) Right Backlight Toggle Keyboard Backlight On/Off Toggle Flashlight On/ Off (99EX models only) Toggle Keyboard Backlight On/ Off TAB Tab Up Up Up Volume Up Prior Down Down Down Volume Down Next Enter Return SP Space 1 1 ! 1 1 2 2 @ 2 2 # 3 3 3 BKSP Backspace 4 4 $ 4 4 5 5 % 5 5 6 6
Preliminary Draft 8/12/11 Key Normal Shift Blue Red SHIFT Shift Period . (period) > * (multiply) . (period) 0 0 ) 0 0 Comma , (comma) < _ (underscore) , (comma) A a A + (add) F1 B b B - (subtract) F2 C c C ( F3 D d D ) F4 E e E = F5 F f F ! F6 G g G @ F7 H h H $ F8 I i I & F9 J j J _ (underscore) F10 K k K ? F11 L l L \ F12 M m M / F13 N n N ~ F14 O o O ' F15 P p P ; F16 Q q Q : F17 R r R ‘ (back qu
Preliminary Draft 8/12/11 Key Normal Shift Blue Red V v V v or V F22 W w W w or W F23 X x X x or X F24 Y y Y y or Y F25 Power Off/On CTRL Control Blue Blue Red Red Z z Menu Z z or Z z or Z 6 - 17
Preliminary Draft 8/12/11 6 - 18
Preliminary Draft 8/12/11 7 System Settings Overview Customized settings are available on the System Settings menu. Tap screen opens. > Settings and the settings Icon Description Bluetooth Configures the Bluetooth radio. See Working with the Bluetooth Radio on page 101. Clock & Alarms Set the system clock, date, time and schedule alarms. See Clock & Alarms on page 7-2. Lock Password protect the terminal to limit access to the terminal.
Preliminary Draft 8/12/11 Icon Description System Adjusts system settings. See System Menu on page 7-7. Microsoft My Phone Synchronizes your phone’s contacts, calendar, tasks, text messages, music, photos, videos, and other documents with your My Phone account at http:\\myphone.microsoft.com. Clock & Alarms The Clock & Alarms settings can be accessed from the Home screen or the Settings Menu. 1. On the Home screen, tap the line that displays the time and date OR Tap 2.
Draft 8/12/11 Personal Menu To access the Personal Menu, tap sonal Menu. > Settings > Personal. The screen opens displaying the Per- Icon Description Buttons Program the side buttons to perform specific tasks. See Buttons on page 7-3. Owner Information Enter your contact information (e.g., name, company, address, telephone number and E-mail address). Phone This Phone icon is present on Dolphin models equipped with WWAN radio (GSM/ UMTS/GPRS/EDGE) capabilities.
Draft 8/12/11 Changing Button Assignments 1. After HotKeys is enabled, tap > Settings > Personal > Buttons . Note: The buttons that appear on this window are the only buttons that can be programmed via the Buttons setting. You cannot add buttons to this window. 2. To change button assignment, tap on the name of the button in the Button column, and then select a program or command in the Assign a program drop down list. 3. Tap OK to save. 4.
Draft 8/12/11 Command Description Opens the menu or performs the action displayed on the right side of the Command bar. Activates the scanner/imager. Changes the screen orientation from portrait to landscape. Scrolls down in the open application. Scrolls left in the open application. Scrolls right in the open application. Scrolls up in the open application. Opens the Start menu.
Preliminary Draft 8/12/11 3. Navigate to the Windows folder and open the Start Menu (My Device > Windows > Start Menu > Programs), tap and hold a blank area of the window, and tap Paste Shortcut on the pop-up menu. Note: If there is no blank space available in the window, tap on Menu > Edit > Paste Shortcut. 4. Tap to verify that the program now appears on the Start menu.
Preliminary Draft 8/12/11 System Menu The System menu enables you to verify and sometimes alter system parameters. To access the System menu, go to Start > Settings > System. Tap the appropriate icon to open that system setting. Icon See Page About See About on page 7-8. Backlight See Backlight on page 7-9. Battery See Battery on page 7-10. Certificates See Certificates on page 7-10. Customer Feedback See Customer Feedback on page 7-10. Encryption See Encryption on page 7-11.
Preliminary Draft 8/12/11 Icon See Page External GPS See External GPS on page 7-11. Five Volt Control See Five Volt Control on page 7-12. Smart Sensors See Smart Sensor on page 7-12. Managed Programs See Managed Programs on page 7-14. Memory See Memory on page 7-15. Power See Power on page 7-16. RIL See RIL on page 7-16. Regional Settings See Regional Settings on page 7-16. Remove Programs See Remove Programs on page 7-17. Screen See Screen on page 7-18.
Preliminary Draft 8/12/11 Copyrights Screen Displays important copyright information. Backlight The Backlight system setting enables you to customize backlight functionality for the display. The backlight for the color display is user-defined. The Backlight system setting screen contains three tabs: Battery Power, External Power, and Brightness. Tap > Settings > System > Backlight.
Preliminary Draft 8/12/11 Battery The Battery system settings menu contains two tabs: Battery Status and Log Config. The Battery Status tab provides the status of the main battery pack (e.g., Battery Time to Full or Battery Time to Empty, Voltage, Current, Temperature, Chemistry, and Serial Number). The Log Config Tab allows you to configure the BatteryLogFile.
Preliminary Draft 8/12/11 Encryption Encryption gives you the option of encrypting files placed on storage cards so that those files cannot be read by any other device. Error Reporting Error Reporting gives you the option of enabling or disabling the error reporting function of Windows Embedded Handheld 6.5. External GPS External GPS determines which port a third-party GPS software application can use to access the GPS receiver.
Preliminary Draft 8/12/11 Five Volt Control Five Volt Control gives you the option to manually enable 5V output to supply power to an external device. By default, 5-Volt Output automatically turns on when AC power is applied to the terminal. If you want to use a USB memory stick without AC power, then you must manually turn on the 5-Volt Output. Do not leave 5-Volt output enabled when you are not using it to supply power to an external device.
Preliminary Draft 8/12/11 Event Track displays an event log summary of detected free fall events exceeding 2 ft. over 250 ms. The summary includes the time, date, and duration of the most recent 50 events. Several options are provided for audible notification of free fall events. Light Settings Light Sensor Settings customize how the terminal responds to the environmental lighting conditions in which the terminal is being used.
Preliminary Draft 8/12/11 Accelerometer Calibration Tap Start to calibrate the integrated accelerometer sensor used for motion detection. When calibration is complete, the "Accelerometer Calibration Finished!" message window appears. Managed Programs Managed Programs are a list of programs that are managed if enrolled to enterprise domain. Managed Programs is the client-side that works with the server product System Center Mobile Device Manager (MDM).
Draft 8/12/11 Memory The Memory applet shows the capacity and usage of the Storage and Program portions of the Flash file system. The Storage portion includes the IPSM folder, which can be detailed under the Storage Card tab. When the Program portion becomes too full, you can use the Task Manager to remove any unnecessary tasks. Main Screen This screen displays the usage statistics of the flash memory.
Preliminary Draft 8/12/11 RIL The RIL Information screen displays useful statistics for the GSM WAN Voice module (PH8). To verify whether or not the GSM radio is enabled, check the Dolphin Wireless Manager (see page 8-6). Power Power system settings contains two tabs: Battery and Advanced Tap > Settings > System > Power Battery Tab The battery tab displays the power level status of the main battery and the status of the backup battery. Note: The Backup Battery gauge registers either 0% or 100%.
Preliminary Draft 8/12/11 The terminal is loaded with a number of pre-programmed regional settings. Select one from the list and the results appear on the screen. To see specific settings or to change a specific setting, tap on one of the tabs, make the change, and tap OK to save it. Remove Programs Remove Programs enables you to remove programs installed on the terminal. Any program (usually CAB or DLL files) stored in the \\IPSM\Honeywell\Autoinstall folder re-installs after a software upgrade or a facto
Preliminary Draft 8/12/11 Screen The Screen system setting contains three screens: General, Clear Type, and Text Size. General Screen Orientation The General screen enables you to set the dynamic screen rotation. Three choices of screen orientation are supported: Portrait, Landscape (right-handed), and Landscape (lefthanded). Align Screen The General Tab also allows you to re-align the screen. You need to re-align the screen if tapping buttons or icons with the stylus no longer seems to work appropriately.
Draft 8/12/11 Text Size Screen The Text Size screen enables you to perform font scaling within certain views of the: • Home screen, • Contacts, • Calendar, • Messaging, and • Tasks. Font scaling means that you can increase or decrease the point size of the font on application windows. To change the font size, move the slider toward Smallest or Largest. The Example text changes to reflect the font change. Tap OK to save the new font size setting.
Preliminary Draft 8/12/11 Using the Task Manager Applications To view the status of the programs running on your mobile computer, tap the Menu button at the bottom of the screen, then tap View > Applications. From the application list, you can: • Tap and hold on an application, then tap Switch To on the pop-up menu. • Tap and hold on an application, then tap End Task or End All Tasks on the pop-up menu. Note: Anytime you stop a running program, it frees up memory.
Preliminary Draft 8/12/11 8 Communication Connections Menu The Connections system setting provides access to the terminal’s various wireless communication options. Icon Tapping this icon… Beam Enables infrared communication. See Receiving Data on page 8-3. Connections Opens Microsoft’s connections manager. See Connections Manager on page 8-4. Dolphin Wireless Manager Manages the wireless radios installed in the terminal. See Dolphin Wireless Manager on page 8-6.
Draft 8/12/11 Using the IrDA Port Using the IrDA port, you can send and receive data between the terminal and other devices equipped with infrared. This can include, but is not limited to, Windows Embedded Handheld information such as Contacts and Tasks, as well as software upgrades. IrDA Port Location IrDA Port Note: Your Dolphin model may differ from the models illustrated; however, the features noted are standard for all 99EX and 99GX models unless otherwise noted.
Preliminary Draft 8/12/11 4. The IrDA port searches for a receiving IrDA port in the vicinity. The selected device reads “Pending.” 5. When the IrDA port finds the aligned IrDA port, it immediately starts sending the selected file. The selected device reads “Sending.” 6. When the file transfer is complete, the selected device reads “Done.” Receiving Data The Beam Setting must be set to receive all incoming beams from other infrared devices. 1. Verify that beam settings are set to receive.
Preliminary Draft 8/12/11 Connections Manager Microsoft’s Connections Manager sets up multiple network connections to Internet Service Providers (ISPs) via external modem. Do NOT enter connection parameters in the Connections Manager if: • you are using one of the on-board wireless radios to connect to a network. The Dolphin terminal uses the settings from each radio’s configuration utility to connect. The connections manager is used primarily to setup WAN modem dial up connections.