® Dolphin 7600 Mobile Computer with Windows Mobile® 6.
Disclaimer Honeywell International Inc. (“Honeywell”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Honeywell to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of Honeywell.
Table of Contents Chapter 1 - Agency Approvals Label Locations ....................................................................................................................1-1 Approvals by Country...........................................................................................................1-2 R&TTE Compliance Statement—802.11b/g and/or Bluetooth .............................................1-2 Dolphin RF Terminal—802.11b/g, Bluetooth, .....................................................
29-Key Numeric Keyboard .................................................................................................. 4-4 Navigation Keys............................................................................................................. 4-4 Hardware Application Buttons ....................................................................................... 4-5 Toggling Between Alpha and Numeric Modes...............................................................
Connections Manager ......................................................................................................... 7-4 Task Tab........................................................................................................................ 7-4 Advanced Tab................................................................................................................ 7-5 Dolphin Wireless Manager ...............................................................................................
Chapter 12 - Technical Specifications Terminal Technical Specifications ..................................................................................... 12-1 Dolphin HomeBase Device................................................................................................ 12-3 Dolphin QuadCharger Device............................................................................................ 12-5 Chapter 13 - Customer Support Product Service and Repair...........................................
1 Agency Approvals Label Locations Dolphin 7600 terminals meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency guidelines that follow. Please read these guidelines carefully before using your Dolphin terminal. Compliance Label Molded-in Text (see page 1-1) Molded-in Text This Class B Digital Device Complies with Canadian ICES-003.
Approvals by Country Country Safety EMC & Radio U.S.A. UL60950-1 (CB Scheme) FCC Part 15, Subpart C, 15.
Dolphin RF Terminal—802.11b/g, Bluetooth, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules.
The crossed out wheeled bin symbol informs you that the product should not be disposed of along with municipal waste and invites you to use the appropriate separate take-back systems for product disposal. If you need more information on the collection, reuse, and recycling systems, please contact your local or regional waste administration. You may also contact your supplier for more information on the environmental performances of this product.
2 Getting Started Out of the Box Verify that your carton contains the following items: • Dolphin 7600 mobile computer (the terminal) • Main battery pack (3.7v, Li-ion) • AC power supply • Localized plug adapters • User CD Note: Be sure to keep the original packaging in case you need to return the Dolphin terminal for service; see Product Service and Repair on page 13-1. Step 1. Install the Main Battery ! Use only the Li-ion battery packs provided by Honeywell.
Step 3. Boot the Terminal The terminal begins booting as soon as power is applied and runs by itself. Do NOT press any keys or interrupt the boot process. Only tap the screen when prompted. When the boot process is complete, the Today Screen (see page 2-2) appears and the terminal is ready for use. Today Screen System resets (see Resetting the Terminal on page 3-25) complete on the Today screen.
Icons in the Navigation Bar Indicator Meaning The terminal could not synchronize data with the workstation via ActiveSync New e-mail or text message (SMS) New voicemail New instant message Ringer off Voice call Voice call in progress Calls are forwarded Call on hold Missed call Data call in progress Battery levels (1–4). Tap this icon to open the Power system setting and see the charge percentage (see page 6-12). Critical battery.
Icons in the Navigation Bar Indicator Meaning Roaming Radio is disabled The radio is not connected to a network Radio connected No radio signal The terminal is searching for a signal Radio signal strength Wi-Fi on Wi-Fi data call Pending alarm Bluetooth Command Bar Located at the bottom of the Today screen, the command bar displays running applications. This area displays various icons that access applications running on the terminal. Use the right and left arrows to navigate through these icons.
Selecting Programs Tapping Start opens the drop-down menu, which provides access to the most common system functions and programs. To open a program, tap Start > Programs. Then, tap the program icon on the menu. Using the Stylus The terminal comes with a stylus inserted into the Stylus Slot (see page 3-10), Use this stylus (or your finger) to select or enter information on the touch screen. The stylus functions as a mouse; generally, a tap is the same as a click.
2-6 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary
3 Hardware Overview Standard Configurations WPAN / WLAN WPAN • • • • • • • • • • • • • Windows Mobile 6.0 Classic Samsung 2440 400 MHz 128MB RAM X 128 MB (non-volatile) Memory 29-key numeric keyboard or 38-key alpha keyboard 2.8” 1/4 VGA TFT color display Li-ion battery: 3.7V / 3240 mAh / 12.0 Wh 5300SR image engine Bluetooth and 802.11b/g radios Power cable (included in each box) • • • • • Windows Mobile 6.
Peripherals The following items are sold separately and enhance your terminal’s capabilities. For information about how to purchase these items, contact a Honeywell sales representative. Dolphin HomeBase™ Device The Dolphin HomeBase device is a charging and communication cradle. There are two versions of this device: one that supports USB and another that supports RS-232 communication. These two options enable your terminal to interface with the majority of PC-based enterprise systems.
Front Panel Features Decode LED Scan LED 1/4 VGA Touch Screen Display (screen protector installed at the factory) Microphone Hardware Application Buttons Keyboard (29-key numeric) Decode and Scan LEDs The Scan LED lights red when you press the Scan trigger in scanning applications. The Decode LED lights green when a scanned bar code is successfully decoded. Both LEDs are user-programmable.
Touch Screen Display The display is a 65,536-color LCD (Liquid Crystal Display) covered by a touch screen lens. The 2.8” 1/4 VGA (Video Graphic Array) is TFT (Thin Film Transistor) color, backlit, and the resolution is 240 x 320; see Display Backlight on page 3-4. ! Dolphin terminals ship with a screen protector already installed over the touch screen lens to help prevent damage to the touch screen. Do NOT remove this screen protector before initial use.
1. You will need a strong, flat, plastic card (a credit card, for example) to wedge under the existing screen protector. Note: If you have one, you can also use the small plastic squeegees designed for touch panels. 2. Press the Blue + Backlight keys to put the terminal in Suspend Mode (see page 3-26). 3. Carefully apply the flat edge of your plastic card to the upper right corner of the touch screen. Catch the edge of the screen protector and pull it up and away from the touch panel.
4. Wipe the screen with a clean, non-abrasive, lint-free cloth. Note: Use ionized air, if available, to blow additional dirt or particles off the touch panel. Installing Your Screen Protector When installing a new screen protector, use a flat plastic card (such as a credit card) to apply the screen protector smoothly and remove any air bubbles. Note: 1. 3-6 If you have one, use the small plastic squeegees designed for touch panels.
2. Clean the touch panel thoroughly with a clean, non-abrasive, lint-free cloth. Make sure nothing is attached to the top of the touch panel. 3. Release the left edge of the releasing paper on the screen protector. 4. Align the exposed edge of the screen protector along the left edge of the touch panel. Make sure that it lies flush with edges of the touch panel. Note: 5. To reposition the screen protector, lift up gently and reapply.
6. Pull smoothly and evenly from left to right until the screen protector is applied. Press gently but firmly. Touch Panel 7. Use the card as necessary to smooth out any air pockets or bumps after application. Press gently but firmly. 8. Press the Backlight 9. Verify that the screen accepts input from the stylus as usual. If not, re-apply the screen protector. 10. Press the Blue 3-8 key to wake the terminal and check the touch panel with the stylus.
11. Clean the surface of the screen protector with a clean, non-abrasive, lint-free cloth. 12. Press the Backlight key to wake the terminal. 13. For maximum performance, recalibrate the screen. Tap Start > Settings > System tab > Screen > Align Screen. 14. Follow the instructions on the screen.
Back Panel Features Image Engine Window Accessory Attachment Stylus Slot Rear Speaker Finger Saddle I/O Connector Accessory Attachment Use this button to attach accessories; see Using the Accessory Attachment on page 3-11. Finger Saddle This is a slightly depressed and angled area of the back panel that is designed to cradle or “saddle” your pointer finger while holding the terminal.
Using the Accessory Attachment The accessory attachment is a standard tab designed to fit universal accessories available for most cell phones. An accessory must be used for body worn operation. Attaching a Belt Clip The accessory attachment on the back panel fits universal swivel clips designed for belts or even pedestal mounts (not available from Honeywell). Simply insert the tab into the slot until you hear a click or follow the instructions that came with the clip or accessory.
Side Panel Features DC Power Jack Headset Jack IrDA Port Side Button Access Door Side Door Note: This graphic shows the left side of the terminal. Access Door This door covers the memory card slot. To increase memory, install a memory card in this slot. This terminal supports microSD™ and microSDHC™ memory cards. For details, see Installing Memory Cards on page 3-13.
Side Door The rubber door on the left side panel provides access to the Headset and DC power jacks. When closed, the side door seals the terminal from moisture and particle intrusion thus preserving the terminal’s environmental rating. Installing Memory Cards This terminal supports microSD and microSDHC memory cards up to 4GB. To install an SD card, you must open the access door on the side panel (Side Panel Features, page 312). Access door removal requires a Torx 5 (T5). 1. Press the Blue 2.
6. Replace the access door and tighten the screw. The access door must be properly sealed before resuming terminal operation. Failure to seal the access door may cause damage not covered by the warranty. 7. Press the Backlight 8. To verify that the operating system recognizes the new memory card, Tap Start > Programs > File Explorer and navigate to the My Device\Storage Card folder. You should see the contents of the memory card displayed on the screen. 3 - 14 key to resume operation.
Bottom Panel Features I/O Connector Hand Strap Slot Hand Strap Slot There is an adjustable, elastic hand strap available for purchase with the terminal. When installing the hand strap, you loop the elastic strip through this slot. For instructions, see Attaching the Hand Strap on page 3-11. I/O Connector The I/O mechanical connector is designed to work exclusively with peripherals and cables designed for the Dolphin 7600 terminal.
Connecting the USB Cable Connect the USB cable to the I/O connector to facilitate USB communication between the terminal and host workstation. I/O Connector Host Workstation USB Cable *Power Port USB Connector *This is a communication-only cable until you plug the power cable into the power port.
Connecting the Power Cable The power port on the back end of the USB connector fits the power cable that comes with each terminal. To charge the terminal while communicating, connect the power cable to the power port.
ActiveSync Communication To synchronize, ActiveSync 4.5 or higher must be installed and configured for the appropriate communication type on the host workstation and the Dolphin terminal. Dolphin terminals ship with ActiveSync already installed. Therefore, if ActiveSync is already installed on the host workstation, you just need to connect the Dolphin terminal to the host workstation (via Dolphin peripheral) to initiate communication. If ActiveSync 4.
Setting Up the Host Workstation Verify that ActiveSync is configured to use the appropriate communication type by clicking File > Connection Settings. For RS-232 communication, connect to COM1. For USB communication, check Allow USB connections. Note: You can have both USB and RS-232 selected in the software without impacting processing. However, your hardware setup should use only RS-232 or USB, not both.
The Mobile Device folder opens in Windows Explorer. The terminal is now treated as a mass storage device, and transferring files is as simple as dragging and dropping or copying and pasting as you would for moving files between folders on your hard drive.
Battery Power Dolphin terminals feature intelligent battery technology with two types of battery power: • • The main battery pack on the back panel (see Main Battery Pack on page 3-21) The backup battery located inside the terminal (see Internal Backup Battery on page 3-24) Both batteries work together to prevent data loss when the terminal is used over long periods of time.
• Replace defective batteries immediately; using a defective battery could damage the Dolphin terminal. • Never throw a used battery in the trash. It contains heavy metals and should be recycled according to local guidelines. • Don’t use a battery in any other manner outside its intended use in Dolphin terminals and peripherals. • Don’t short-circuit a battery or throw it into a fire; it can explode and cause severe personal injury. • Excessive discharge damages a battery.
2. Drill-down to HKEY_LOCAL_MACHINE > System > CurrentControlSet > Control > Power. 3. Change the Value Data of the BattPowerOff and ExtPowerOff entries. 4. Tap OK to save changes. Note: These changes will not persist through a cold boot. To ensure that these settings persist through cold boots, you need to use the RegBackup Power Tool. For more information about Registry Power Tools, refer to the Dolphin Power Tools User’s Guide available for download at www.honeywell.com/aidc.
Internal Backup Battery Located inside the terminal, the backup battery is a 2.4V nickel metal hydride (NiMH) battery. The internal backup battery prevents the terminal from being reset when you remove the main battery pack. This battery retains RAM data and allows the real-time clock to remain operational for up to 30 minutes.
Resetting the Terminal There are two ways to reset the Dolphin terminal: a soft reset and a hard reset. Soft Reset (Warm Boot) A soft reset re-boots the terminal without losing RAM data. You would perform a soft reset 1) after installing software applications that require a reboot, 2) after making changes to certain system settings, or 3) when the terminal fails to respond. 1. Press and hold Red + ESC for approximately 5 seconds.
Suspend Mode Suspend mode suspends terminal operation. The terminal appears to be “off” when in suspend mode. The terminal is programmed to go into suspend mode automatically when inactive for a specified period of time. You can set this time period in the Power setting. To Put the Terminal in Suspend Mode Press the Blue Note: + Backlight keys. You should always put the terminal in suspend mode when you change the battery pack; see Changing the Main Battery Pack on page 3-21.
4 Using the Keyboards Overview There are two keyboard options: a 29-key keyboard and the 38-key keyboard. 29-Key Numeric Keyboard 38-Key Alpha Keyboard P2 P1 P3 P4 SCAN SEND END ESC PG SFT PG F1 1 F4 4 GHI F7 7 PQRS TAB F3 F2 2 ABC 3 DEF F6 F5 5 JKL 6 MNO F9 F8 8 TUV 9 WXYZ F10 BKSP 0 START SP . The buttons are recessed under the overlay for maximum durability and the panel is backlit for maximum viewability in various lighting conditions.
Function Keys Function keys appear on both keyboards and perform specific functions. Name Key Function Backlight Toggles the keyboard backlight on and off. Backspace Backspace moves the cursor back one space. If you are typing text, a character is deleted each time you press the backspace key. Escape Cancels an action. Enter Performs the same function as the Enter key on a PC or workstation. Scan • Activates the image engine to scan a bar code or take an image.
Alpha/Numeric Indicator The Navigation bar features an icon that indicates the alpha/numeric status of the keyboard. This icon changes when the keyboard status changes. Icon Keyboard Status The keyboard is in lowercase alpha mode. The keyboard is in shifted (uppercase) alpha mode. The keyboard is in numeric mode.
29-Key Numeric Keyboard Hardware Application Buttons P2 P3 P1 Escape P4 SCAN SEND END ESC PG SFT PG Navigation Keys Scan Enter Shift TAB Tab F1 1 2 ABC F4 5 JKL F7 6 MNO 8 TUV 9 WXYZ F10 BKSP 0 Alpha Indicators F9 F8 7 PQRS 3 DEF F6 F5 4 GHI Backspace F3 F2 START SP Space . Backlight Modifier Keys Navigation Keys Located in the center of each keyboard for easy access with either hand, the navigation keys enable you to move the cursor through application screens.
Hardware Application Buttons These four buttons are programmed to launch software applications when the Today Screen (see page 2-2) is on the screen. Hardware Application Buttons P2 P3 P1 SCAN P4 SEND END To customize these settings, tap Start > Settings > Personal tab > Buttons Buttons Column Matching Hardware Button Buttons 1–4 Buttons P1—P4 on the 29-key keyboard. Left Left side button; see Side Button on page 3-12. Right Right side button; see Side Button on page 3-12. .
Toggling Between Alpha and Numeric Modes The 29-key keyboard defaults to numeric mode, which means that the keyboard boots up to numeric mode after each hard reset. Numeric mode is when you type numbers with the number keys. Alpha mode is when you type letters or characters with the number keys. The keyboard switches between alpha and numeric modes easily.
29-Key Blue Key Combinations (Alpha Mode) Tap the Blue modifier key to switch to alpha mode for the next key pressed. Double-tap the Blue modifier key to switch to alpha mode permanently.
Key Character 9 ( 0 ) 29-Key Red Key Combinations Special Characters Key Combination Character Red + Left Arrow - Red + Right Arrow + Red + BKSP * Red + SP # Red + . , Red + P1 / Red + P2 = Red + P3 ; Red + P4 \ Functions 4-8 Key Combination Function Red + ESC (hold) Soft reset (warm boot) Red + TAB (hold) Hard reset (cold boot) Red + Up Arrow Page up Red + Down Arrow Page down Red + 1 F1 Red + 2 F2 Red + 3 F3 Red + 4 F4 Red + 5 F5 Red + 6 F6 Red + 7 F7 Re
Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Key Combination Function Red + 9 F9 Red + 0 F10 Rev (b): Preliminary 9/29/2008 4-9
38-Key Alpha Keyboard Scan Navigation Keys Tab Backspace Enter Escape Space Shift Backlight NUM Lock Key Modifier Keys Toggling Between Alpha and Numeric Modes The 38-key keyboard defaults to lowercase alpha mode, which means that the keyboard boots up to lowercase alpha mode after each hard reset. Numeric mode is when you type numbers with the number keys. Alpha mode is when you type letters or characters with the number keys. The keyboard switches between alpha and numeric modes easily.
38-Key Red Key Combinations Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Key Combination Function Red + ESC (hold) Soft reset (warm boot) Red + TAB (hold) Hard reset (cold boot) Red + Down Arrow P1 Red + Up Arrow P2 Red + Left Arrow P3 Red + Right Arrow P4 Red + Left Side Button P5 Red + Right Side Button P6 Red + A F1 Red + F F2 Red + K F3 Red + P F4 Red + U F5 Red + E F6 Red + J F7 Red + O F8 Red + T F9 Red + Z F10 Rev (b): Preliminary 9/29/2008 4 - 11
38-Key NUM Lock Mode • To switch to numeric mode for the next key pressed, tap the NUM key once. • To lock into numeric mode, double-tap the NUM key. • If locked in numeric mode, double-tap NUM key again to switch back to alpha mode. Numbers Key Character B 1 C 2 D 3 G 4 H 5 I 6 L 7 M 8 N 9 R 0 Key Character J \ Q .
Special Functions Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Key Character A Volume up F Volume down E SP Rev (b): Preliminary 9/29/2008 4 - 13
4 - 14 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary
5 Using the Image Engine Overview The Dolphin terminal houses a compact image engine using Adaptus™ Imaging Technology that instantly reads all popular 1D and 2D bar codes and supports omni-directional aiming and decoding. The image engine can also capture digital images. *Pull the plastic tab to remove the plastic film cover over the image engine window before activating the image engine. Available Engines 5300 Standard Range (5300SR) 8.3 mil Linear *Working Range: (.020cm) 10 mil PDF417 (.
Supported Bar Code Symbologies Symbology Type Symbology Name 1D Symbologies Codabar Code 3 of 9 Code 11 Code 32 Pharmaceutical (PARAF) Code 93 Code 128 EAN with Add-On EAN with Extended Coupon Code EAN-8 EAN-13 GS1-128 GS1 Databar Interleaved 2 or 5 2D Symbologies Aztec Codablock Code 16K Code 49 Composite Data Matrix GS1 Databar MaxiCode Micro PDF OCR PDF417 QR Code Composite Codes Aztec Mesa Codablock F EAN·UCC GS1 Databar-14 OCR OCR US Money Font MICR (E 13 B) and SEMI Font OCR-A OCR-B Postal C
Activating the Engine When a scanning application is open, press the SCAN key to activate the image engine. You can also press one of the side buttons (see page 3-12), which are programmed to activate the image engine in a scanning application by default. Using Demos Demos are software utilities loaded on all Dolphin terminals that demonstrate the advanced features of the terminal. There are two Demos feature the image engine: Image Demo and Scan Demo.
5. When the bar code is successfully decoded, the decode LED lights green and the terminal beeps. Sample Bar Codes You can use the following bar codes to verify decoding: Sample 128 Sample PDF417 Code 128 PDF417 Test Message Omni-Directional Scanning Positions The high-vis aiming pattern frames the bar code to provide you with the best scanning performance. Note: To achieve the best read, the aiming beam should be centered horizontally across the bar code.
Capturing Images The image-capture process is an intuitive, split-second operation for experienced users. By following basic guidelines, however, new users can easily develop their own technique and, with practice, quickly learn to adapt to different application environments. Image Preview When the imaging process is initiated, the touch screen displays a preview of the object.
5-6 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary
6 System Settings Overview Customized settings are available on the Start menu. Tap Start > Settings and settings screen opens displaying the Personal tab. Settings consists of three tabs: Personal, System, and Connections. Personal Tab System Tab Connections Tab Tab Description See Page Personal Customizes buttons, set SIP options, and adjust headset settings. 6-2 System Adjusts system settings. 6-7 Connections Establishes network connections settings.
Personal Tab To access the Personal tab, go to Start > Settings. The screen opens displaying the Personal tab. Icon Description For more information… Buttons Program the side buttons to perform specific tasks. See Buttons on page 6-3. Input Customizes the SIP. See Input on page 6-4. Lock Password protect the terminal to limit access to the terminal. Menus Customizes what appears on the Start menu. Owner Information Enter your contact information.
Buttons Buttons programs both keyboard buttons and the side buttons to launch applications or execute commands. The default button assignments that appear on the Buttons window are inactive until you enable the HotKeys Power Tool. To Enable HotKeys 1. Tap Start > Power Tools and tap the HotKeys icon once assignments in the Buttons setting are active. 2. Verify the assignment by tapping the button on the keyboard. .
Additional Functions The Assign a program list also contains the following commands: Command Description Opens the soft input panel. Nothing happens when the button is pressed. This is the default setting for the LSide and RSide buttons and means that pressing either button activates the image engine. Performs the same function as tapping OK on the screen. Scrolls down in the open application. Scrolls left in the open application.
Menus You can add existing programs you use often, such as File Explorer, to the Start menu for faster access. You are not installing the program, just allowing access to it from the Start menu. To add programs to the Start menu, you can use • The Menus setting on the Personal tab (see page 6-5), • File Explorer (see page 6-5), or • ActiveSync (see page 6-6). Note: The Start menu can hold only seven applications at a time. Using System Settings 1. Tap Start > Settings > Personal tab > Menus 2.
2. Tap and hold on the program, then tap Copy on the pop-up menu. 3. Navigate to the Windows folder and open the Start Menu (My Device > Windows > Start Menu), tap and hold a blank area of the window, and tap Paste Shortcut on the pop-up menu. 4. Tap the Start menu to verify that the program now appears on it.
System Tab The System tab enables you to verify and sometimes alter system parameters. To access the System tab, go to Start > Settings > System tab. Tap the appropriate icon to open that system setting. For details, • • • • • • • • • • • • • See About on page 6-7. See Backlight on page 6-8. See Certificates on page 6-8. See ClearType Tuner on page 6-8. See Clock & Alarms on page 6-9. See Encryption on page 6-9. See Error Reporting on page 6-9. See External GPS on page 6-10. See Memory on page 6-10.
Backlight The Backlight system setting enables you to customize backlight functionality for the display. The backlight for the color display is user-defined. Tap Start > Settings > System tab > Backlight. There are two tabs: The Battery tab determines display backlight settings when the terminal is running on battery power. The External tab determines display backlight settings when the terminal is running on external power. The options on each tab are the same.
Clock & Alarms This setting sets the system clock, which means that all scheduled items run according to this setting. The time and date need to be reset after every hard reset of the terminal so that the system clock is accurate. On the Today screen, tap the line that displays the time and date, The Clock Settings screen appears. The selected time sets the system clock.
External GPS If a Windows Mobile 6.0-based device is equipped with a GPS module, External GPS is a Microsoft tool that determines which port an external GPS software application can use. The Dolphin 7600 terminal is not equipped with a GPS module. Memory The Memory system setting displays capacity and usage statistics for both RAM (volatile) and IPSM/ Storage Card (non-volatile) memory. Access this setting whenever you receive system messages about memory.
This tab displays the current capacity and usage statistics of the selected memory type; IPSM or Storage Card. Storage Card Tab Select the memory type from the drop-down list. IPSM is selected by default. Total storage card memory=The total MB of memory capacity of IPSM or Storage Card. In use=The MB currently being used. Free=The MB that is still available for use. IPSM—Short for Internal Persistent Storage Manager, this is the on-board Flash memory that is non-volatile.
Power Power system settings contains three tabs: Battery and Advanced. Battery Tab Displays the remaining charge of batteries. For more information about the terminal’s batteries, see Battery Power on page 3-21. Advanced Tab Determines power time-outs. For On battery power, select from the drop-down list, the number of minutes of inactivity you want to pass before the terminal powers off when running on battery power.
Remove Programs Remove Programs enables you to remove programs installed on the terminal. Use this setting to troubleshoot when you receive messages that the terminal is out of memory. The programs removed are removed from RAM memory. Any program (usually CAB or DLL files) stored in the Autoinstall folder (My Device > IPSM > Autoinstall) will re-install after the next hard reset. For information about the hard reset process, see Hard Reset (Cold Boot) on page 3-25. 1. Tap Remove Programs.
Screen The Screen system setting contains three tabs: Alignment, Clear Type, and Text Size. Alignment Tab Orientation–The default orientation for the screen is Portrait. Select one of the Landscape options to change the screen orientation. Align Screen–You need to re-align the screen if tapping buttons or icons with the stylus no longer seems to work appropriately. Tapping Align Screen brings up the align screen window where you are guided to tap a target several times.
7 Connecting the Terminal Connections Tab The Connections system setting provides access to the terminal’s various communication options. Icon Description See Page Beam Controls whether or not the terminal can receive data via IrDA. 7-3 Bluetooth Configures the Bluetooth connection. This icon appears only if a Bluetooth radio and driver is installed on the terminal. 8-1 Connections Opens Microsoft’s connections manager.
Infrared Communication Using the IrDA port, you can send and receive data between the terminal and other devices equipped with infrared. This can include, but is not limited to, Windows Mobile information such as Contacts and Tasks, as well as software upgrades. The maximum data transfer speed is 115 Kbps. IrDA Port Location IrDA Port To send or receive, the IrDA ports of both devices - whether it’s two terminals, or a terminal and a host device - must be aligned with each other and within a close range.
5. When the IrDA port finds the IrDA port of the other device, it immediately starts sending the selected file. The selected device reads “Sending.” 6. When the file transfer is complete, the selected device reads “Done.” Receiving Data The Beam Setting must be set to receive for the terminal to receive data from other infrared devices. 1. Verify that beam settings are set to receive. Tap Start > Settings > Connections tab > Beam. The Beam Settings window should appear as follows: 2.
Connections Manager The connections manager sets up various network connections to Internet Service Providers (ISPs) via external modem. To open the connections manager, tap Start > Settings > Connections tab > Connections icon . Server-Assigned IP Addresses All server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP). Zero-Config Wi-Fi The zero-config Wi-Fi feature of Windows Mobile is disabled on Dolphin 7600 terminals.
Proxy Server Connections If you are connected to your ISP or private network during synchronization, the terminal should download the proper proxy settings during synchronization with the PC. If these settings are not on your PC or need to be changed, ask your ISP or network administrator for the proxy sever name, server type, port, type of Socks protocol used, and your user name and password.
Dolphin Wireless Manager The Dolphin Wireless Manager provides a centralized interface that enables and disables all the on-board radios. Each radio has its own configuration program and the Dolphin Wireless Manager also provides shortcuts to the configuration utilities for each radio. There are two radio options: 802.11b/g and Bluetooth. 1. 802.11b/g The WLAN radio is configured in the Honeywell WLAN Secure Wireless Client (SWC).
Accessing Radio Configuration Utilities Each of the three radios have their own configuration utilities that you can access through the Menu. For 802.11b/g Tap WLAN Settings to open the SWC and configure the radio. Refer to the Honeywell WLAN SWC User’s Guide, which is available for download from the 7600 product page at www.honeywell.com/aidc. For Bluetooth Tap Bluetooth Settings to open the Bluetooth Manager and configure the radio (see page 8-1).
COM Port Assignment Table COM Port Description COM0 Unused COM1 Serial Port: RS-232 Connector on the bottom panel COM2 Not accessible COM3 IrDA: Serial Infrared (SIR) up to 115 Kbps COM4 Not accessible COM5 Bluetooth DUN COM6 IrCOMM COM7 Unused COM8 USB Serial: Virtual USB Serial port for ActiveSync COM9 Bluetooth BTHATCI server 7-8 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary
Network Cards The Network Cards setting displays the network cards installed in the terminal. 1. Tap Start > Settings > Connections > Network Cards. 2. Tap on an adapter in the list to review its settings. (Server-assigned IP addresses use DHCP.) 3. If you make a change on one of these tabs, tap OK to confirm the changes. 4. You must perform a soft reset to update the registry entries; see Soft Reset (Warm Boot) on page 325.
USB to PC The USB to PC applet enables you to switch between RNDIS (Remote Network Driver Interface Specification) USB and Serial USB communication. Dolphin 7600 terminals default to Serial USB. Honeywell recommends using Serial USB. To change this setting, tap Start > Settings > Connections tab > USB to PC is not selected, which indicates Serial USB. . The enable option To switch to RNDIS USB, select Enable advanced network functionality and tap OK to save. (Wait as the terminal makes the change.
Installing Additional Software Dolphin terminals ship with the operating system, radio drivers, and custom Honeywell software already installed. These default programs install when your terminal first boots up. You can install additional software programs to the terminal provided that the following parameters are met: • • • The software program was created for the Windows Mobile platform. The terminal has enough memory to store and run the program. The program has an EXE, CAB, or DLL extension.
If the File is Not an Installer Some programs cannot be installed on workstations because they are designed exclusively for Windows Mobile-based devices. In these cases, the appropriate files must be stored on the host workstation and transferred to the terminal via ActiveSync Explore. Note: You know that the program is not an installer because an error message stating that the program is valid but designed for a different type of computer appears when you try to install the program on the workstation. 1.
8 Working with the Bluetooth Radio Enabling the Bluetooth Radio You enable the Bluetooth radio in the Dolphin Wireless Manager (see page 7-6). 1. Tap Start > Settings > Connections tab > Dolphin Wireless Manager . 2. Tap anywhere inside the Bluetooth rectangle and Bluetooth begins activating. 3. When the radio is activated (i.e., transmitting a signal), the OFF button changes to ON. Now, the Bluetooth radio is transmitting a signal.
Connecting to Other Bluetooth Devices You need to perform a device discovery and then select a discovered device and connect to it. Pairing happens as part of the connection process. 1. In the Dolphin Wireless Manager, tap Menu > Bluetooth Settings. OR Tap Start > Settings > Connections tab > Bluetooth . 2. Tap Add new device. The terminal begins searching for discoverable Bluetooth devices. 3. Select a device in the list and tap Next.
4. You are prompted to enter a passcode. If the device has a specific passcode, enter it in the Passcode field and tap Next. If the device does not have a specific passcode, enter one in the Passcode field and tap Next. The Bluetooth radio tries to connect with the device. 5. If you created a passcode, you will be prompted by the other device to enter the same passcode. Enter the created passcode to establish a paired connection.
8. The device appears in the list on the main window. 9. After the passcodes have been accepted on both sides, you have a trusted (“paired”) connection. Pairing and Trusted Devices The terminal does support pairing. Pairing happens during general connection setup. Paired devices are "trusted" devices. This means that there is unrestricted access to all services (including services that require authorization and authentication). A connection can exclude pairing.
Types of Devices and Services When you tap Add new device on the Devices tab, the Bluetooth radio scans for discoverable Bluetooth devices in range, which are Bluetooth devices that have been made discoverable. Device Types The types of devices in the vicinity of the radio appear in the list of discovered devices. Supported Services Only the services that are mutually supported on both devices appear on the Partnership Settings window.
Connecting to Bluetooth Printers 1. Make sure the Bluetooth printer is in range and set to be discoverable by other Bluetooth devices. 2. Look up the Bluetooth printer’s broadcasted ID. 3. Perform a device discovery (Tap Settings > Connections > Bluetooth > Add new device.) 4. Look for the Bluetooth printer’s broadcasted ID in the list of discovered devices. 5. Click on the Bluetooth printer’s ID and wait for the prompt to enter a Passcode. 6. If required, enter the Passcode and tap Next.
Transferring Files 1. Tap Start > Programs > File Explorer. 2. Navigate to the file you want to transfer. 3. Tap and hold on the file and select Beam File on the popup menu. 4. The Bluetooth radio begins searching for devices. When a Bluetooth device is first found, it appears as an Unknown device; the icon indicates that the device is a Bluetooth device. As data is retrieved, the device IDs appear in the list. 5. Tap the device to begin sending the selected file. 6.
Making the Terminal Discoverable By default, the Dolphin terminal is not discoverable, which means that the terminal will not be found by other Bluetooth devices. To make the terminal discoverable, tap the Mode tab on the Bluetooth Settings window. Select Make this device visible to other devices and tap OK.
9 Dolphin HomeBase Device Overview The Dolphin HomeBase device is a charging and communication cradle that supports full-speed USB 1.1 communication with a workstation. You can also purchase a serial RS-232 HomeBase device. Battery Charging The HomeBase device completes a full charge of the main battery pack in less than four hours. In addition to charging, the HomeBase device powers the intelligent battery charging system in the terminal that protects the battery from being damaged by overcharging.
Front Panel Terminal Well Dock LED Terminal Well Place the terminal in this well to communicate with a host device, power the terminal, and charge its battery. Dock LED Turns solid green when the terminal is properly seated in a powered HomeBase device. When this light is on, the terminal is connected to the HomeBase device. Rubber Feet The bottom panel has four rubber feet–one at each corner–to stabilize the unit on a flat surface.
Back Panel DC Power Jack Pivot Connector USB Port Pivot Connector This pivoting connector swivels 90 degrees. The default position is horizontal, with the connectors facing straight out the back panel. The pivot connector stops in both the horizontal and vertical positions, with the connectors facing out the bottom panel. DC Power Jack Connect the power cable to this power jack; see Powering the HomeBase Device on page 9-4. USB Port This USB port is full-speed (v1.1).
Powering the HomeBase Device The terminal requires 5 volts DC input for communication and battery charging; the power adapter on the power cable converts the voltage from the power source to 5 volts DC. Only power adapter cables from Honeywell convert the voltage appropriately. The same power cable that ships with each terminal can be used to power the HomeBase. This cable contains a plug adapter for each geography (US, UK, EU, etc.). Plug Adapter 1 Power Adapter Power Cable 1.
Charging the Main Battery The HomeBase powers the terminal and fully charges its main battery pack in less than four hours. As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-Ion batteries. The process monitors changes in temperature, current, and voltage. Inserting a Terminal 1. Install the battery pack in the terminal; see Install the Main Battery on page 2-1. 2.
Mounting the Dolphin HomeBase Device If you want to mount the HomeBase to a vertical surface, be sure to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is seated in the HomeBase. Back Panel Dimensions .15 in. (3.85 mm.) .32 in. 8.06mm Diameter, 2 places 1.44 in. (36.7 mm.) .53 in. 13.65mm, 2 places 3.99 in. (101.42 mm.) 1.85 in. (46.87 mm.) 4.35 in. (110.47 mm.) Mounting Guidelines 1.
Bottom Panel Dimensions .55 in. (14.07 mm.) .67 in. (16.97 mm.) 3.73 in. (94.88 mm.) Note: The pivot connector should be facing straight out the bottom panel (as shown) when mounting the HomeBase to a vertical surface.
9-8 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary
10 Dolphin QuadCharger Device Overview The Dolphin QuadCharger device is a four-slot charging station that charges up to four Li-ion battery packs in four hours. For more details about charging, see Battery Charging on page 10-3. ! Use only the peripherals, power cables, and power adapters from Honeywell. Use of peripherals, cables, or power adapters not sold/manufactured by Honeywell may result in damage not covered by the warranty. ! Use only the Li-ion battery packs provided by Honeywell.
Back Panel Power Supply Connector Power Switch Power Supply Connector Use this connector to attach the power supply to the QuadCharger device. The universal power supply accepts input voltages between 90-265 volts. Power Switch Toggle the power switch to turn the QuadCharger device on and off. Supplying Power to the QuadCharger Device Use the power adapter cable that comes with the QuadCharger device so that the input voltage is adjusted appropriately. 1.
Battery Charging Inserting and Removing Battery Packs To insert a battery pack, place the end of the battery without the locking tab into the bottom of the charging pocket and snap the battery into place with a hinging motion. To remove a battery pack, push the locking tab down and pull the battery away from the charging slot with a hinging motion. Charging Process The QuadCharger device charges Li-ion battery packs in four hours. Each charging slot works independently of the other three.
Mounting the QuadCharger Device The QuadCharger device should be mounted on a dry, stable surface such as a desktop or workbench, or a flat, vertical surface such as a wall. Mounting Location When choosing a location for the QuadCharger device: • Keep in mind that the mounting location must allow users easy access to power switch and power connector. • Do NOT place the QuadCharger device in an enclosed space because restricted air flow can cause the temperature to elevate, which can effect charging.
Bottom Panel Mounting Dimensions 11 in. (278.93 mm.) 4.78 in. (121.4 mm.) 1.42 in. 1.17 in. (36 mm.) (29.7 mm.) 6.17 in. (156.8 mm.) .99 in. (25.2 mm.) .13 in. (3.4 mm.) .99 in. (25.2 mm.) DIN Rail Dimensions .14 in. (3.6 mm.) .7 in. (17.8 mm.) .98 in. (25 mm.) .25 in. 1.38 in. (6.3 (35 mm.) mm.) 1 in. (27mm.) .04 in. (1 mm.) Mounting Guidelines 1. Before you begin, make sure you have two screws that are size #5–diameter measurement of 0.125 in. (3.18 mm). 2.
Troubleshooting If you encounter problems with the QuadCharger device, refer to chart below for possible solutions. If problems persist, please contact Technical Assistance (see page 13-2). Problem Issue The Status LED does not come on when I insert a battery pack into a slot. Check the power connections on the QuadCharger device; make sure the POWER switch is ON and the battery pack is properly seated. The Status LED lights red during charging.
11 Dolphin Mobile Mount Overview The Dolphin Mobile Mount provides easy and secure access to the Dolphin terminal in mobile environments. ! Use only the peripherals, power cables, and power adapters from Honeywell. Use of peripherals, cables, or power adapters not sold/manufactured by Honeywell may result in damage not covered by the warranty.
2. The latch at the top should grip the back of the image engine window slot.
Mounting The Dolphin Mobile Mount ships with a standard RAM mount (101B). You attach one ball joint that you attach to the back panel of the mount (with the fasteners provided).
Then, you attach the rest of the RAM mount. Then, fasten the RAM mount to a stable surface.
12 Technical Specifications Terminal Technical Specifications Basic Features Operating System: Windows Mobile 6.0 Development Environment: Honeywell SDK for Windows Mobile 6.
Terminal Technical Specifications Composite Codes: Aztec Mesa, Codablock F, EAN·UCC, GS1 Databar-14 OCR: OCR-A, OCR-B, OCR-US Money Font Postal Codes: Postnet and most international 4 state codes, Australian Post, British Post, Canadian Post, China Post, Japanese Post, KIX (Netherlands) Post, Korea Post, Planet Code Wireless WLAN (optional): 802.
Dolphin HomeBase Device Structural Dimensions 4 in. high X 4.4 in. wide X 3.7 in. deep (10.2 cm. X 11.2 cm. X 9.4 cm.) Weight 11.2 oz.
Dolphin HomeBase Device Fire Retardant: 12 - 4 UL 94-VO Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary
Dolphin QuadCharger Device Structural Dimensions 11 in. long X 4.8 in. wide X 1.5 in. high (27.9 cm. long X 12.2 cm. wide X 3.8 cm. high) Weight 15.1 oz. (428g) Material Case: Polycarbonate ABS blend Color: Gray Mounting Use DIN rail slide to mount to a desktop or wall; see DIN Rail Dimensions on page 10-5.
12 - 6 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary
13 Customer Support Product Service and Repair Honeywell provides service for all its products through service centers throughout the world. To obtain warranty or non-warranty service, contact the appropriate location below to obtain a Return Material Authorization number (RMA #) before returning the product. North America Telephone: (800) 782-4263 Fax: (803) 835-8012 E-mail: naservice@handheld.
Technical Assistance If you need assistance installing or troubleshooting your device, please call your distributor or the nearest technical support office: North America/Canada Telephone: (800) 782-4263 (8 a.m. to 6 p.m. EST) Fax number: (315) 554-6705 E-mail: natechsupport@handheld.com Latin America Telephone: (803) 835-8000 Telephone: (800) 782-4263 E-mail: latechsupport@handheld.com Brazil Telephone: +55 (21) 3535-9100 Fax: +55 (21) 3535-9105 E-mail: brsuporte@handheld.
Limited Warranty Honeywell International Inc. ("Honeywell") warrants its products to be free from defects in materials and workmanship and to conform to Honeywell’s published specifications applicable to the products purchased at the time of shipment.
How to Extend Your Warranty Honeywell offers a variety of service plans on our hardware products. These agreements offer continued coverage for your equipment after the initial warranty expires. For more information, contact your Sales Representative, Customer Account Representative, or Product Service Marketing Manager from Honeywell, or your Authorized Reseller.
Honeywell 700 Visions Drive P.O.