Preliminary Draft, Not for Release - Please Review 2-3-2015 Dolphin™ 75e powered by Android 4.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Table of Contents Chapter 1 - Dolphin 75e Terminal Agency Information Label Locations ....................................................................................................................1-1 Model Number and Serial Number.................................................................................1-1 Approvals by Country...........................................................................................................
Preliminary Draft, Not for Release - Please Review 2-3-2015 File Browser Power Tool ................................................................................................... 2-12 Browser Menu.............................................................................................................. 2-12 \Honeywell ................................................................................................................... 2-12 AutoInstall Settings..........................................
Preliminary Draft, Not for Release - Please Review 2-3-2015 Capturing Images ................................................................................................................ 4-6 Taking an Image with the Imaging Demo ...................................................................... 4-6 Using the IQ Image Demo to decode intelligent bar codes and capture images........... 4-7 Using the Signature Demo..........................................................................................
Preliminary Draft, Not for Release - Please Review 2-3-2015 Wi-Fi Network Connections ................................................................................................. 7-2 Turning Wi-Fi Networking On or Off .............................................................................. 7-2 Connecting to a Wi-Fi Network ...................................................................................... 7-2 Receiving Network Notifications ....................................................
Preliminary Draft, Not for Release - Please Review 2-3-2015 Power .................................................................................................................................. 9-4 Connecting Power to the HomeBase .................................................................................. 9-5 Charging the Main Battery................................................................................................... 9-5 Charging a Spare Battery in the Auxiliary Battery Well ......
Preliminary Draft, Not for Release - Please Review 2-3-2015 Charging the Main Battery................................................................................................. 11-4 To Power a Terminal and Charge its Main Battery...................................................... 11-5 Removing the Cable .......................................................................................................... 11-6 Chapter 12 - Dolphin 70e Black ChargeBase (Model 70e-CB) Overview...................
Preliminary Draft, Not for Release - Please Review 2-3-2015 Communication.................................................................................................................. 13-5 Establishing Ethernet Communication......................................................................... 13-5 Bottom Panel ............................................................................................................... 13-6 Optional DIN Rail Mount ..................................................
Preliminary Draft, Not for Release - Please Review 2-3-2015 x
Preliminary Draft, Not for Release - Please Review 2-3-2015 1 Dolphin 75e Terminal Agency Information Dolphin 75e handheld computers meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency guidelines that follow. Read these guidelines carefully before using your Dolphin terminal.
Preliminary Draft, Not for Release - Please Review 2-3-2015 FCC Requirements Dolphin RF Terminal—802.11a/b/g/n/ac, Bluetooth, and/or GSM This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
Preliminary Draft, Not for Release - Please Review 2-3-2015 The highest reported SAR values for head, body-worn accessory and simultaneous transmission use conditions are: ____ W/kg (____ g), ____ W/kg (____ g) and ____ W/kg (____ g). The highest reported CE SAR values for head, body-worn accessory and simultaneous transmission use conditions are: ____ W/kg (____ g), ____ W/kg ( ____ g), ____ W/kg ( ____ g).
Preliminary Draft, Not for Release - Please Review 2-3-2015 Microwaves The radio in the Dolphin RF terminal operates on the same frequency band as a microwave oven. Therefore, if you use a microwave within range of the Dolphin RF terminal you may notice performance degradation in your wireless network. However, both your microwave and your wireless network will continue to function.
Preliminary Draft, Not for Release - Please Review 2-3-2015 2 Getting Started Out of the Box Verify that the carton contains the following items: • Dolphin 75e handheld computer (terminal) • 1 GB, 2 GB or 4 GB microSD™ Memory Card (Optional) • 3.7V Li-ion rechargeable battery • USB charge/communication cable • Power adapter with regional plug adapters • Quick start guide • Compliance regulatory sheet If you ordered accessories for your terminals, verify that they are also included with the order.
Preliminary Draft, Not for Release - Please Review 2-3-2015 4 3 5 Apply pressure to the edges of the battery door before engaging the lock to ensure the door is properly closed. 6 Charge the Battery The power source for the Dolphin terminal is the 3.7V Li-ion rechargeable battery located under the battery door on the back panel of the device. See Battery on page 3-8 for additional information on battery storage, use, and disposal.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Using the USB Charge/Communication Cable (Model 70e-USB ADAPTERKIT) Dolphin 75e terminals ship with a USB Charge/Communication Cable and a power adapter with regional plug adapters. The USB Charge/Communication cable provides two options for charging the terminal.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Power On the Terminal To turn the terminal On, press and release the Power button during the initial boot process. . Do not press any buttons or attempt to remove the battery The Welcome Screen The first time you power up the Dolphin terminal, a Welcome screen appears after the boot process is finished.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Customize the Home Screen and Access Apps The Android™ operating system provides space for user customization and control with five Home Screen panels. Notification/Status Bar Search Bar Clock Widget Home Screen Panel Swipe left or right with your finger to scroll between five Home screen panels. Personalize the panels with your choice of app shortcuts, folders, and widgets.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Notification Panel A plus sign icon appears on the status bar when the quantity of notifications exceed the available space on the bar. To view all notifications, touch and hold the status bar, and then drag down. Tap a notification to open the related application. Swipe up from the bottom of the screen to close the notification panel.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Icon Meaning Icon Error with text or multimedia message delivery Meaning Bluetooth incoming file notification Terminal is connected to a computer using a USB cable ABD active (USB debugging enabled) Uploading data Wi-Fi network connected and signal strength Downloading data Ethernet status - disconnected Download finished Ethernet status - connected Synchronizing data Music player active Error with sync or sign-in The terminal could n
Preliminary Draft, Not for Release - Please Review 2-3-2015 Hints: • To create a folder, drag and drop an app icon on top of another icon. • To move a shortcut from the Favorites tray to the Home screen panel, touch and hold the item, and then drag and drop the icon onto the Home screen. To add a widget: 1. Touch All Apps . 2. Select the Widget tab. 3. Touch and hold the widget you want to add. The terminal vibrates and switches to the Home screen. 4. Drag and drop the widget into the desired position.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Button Function Back Back to the previous screen. Volume Raises or lowers the volume of the active speaker. Hotkeys You can configure the Scan button and the Left and Right side buttons of the terminal to launch specific applications. Touch All Apps > Power Tools > Configure Hotkeys . Touch the box next to the key being configured. Select the app you want assigned to the key from the associated menu.
Preliminary Draft, Not for Release - Please Review 2-3-2015 2. Drag the to the right or press the Menu button To adjust the timeout limit, touch All Apps to unlock the terminal. > Settings > Display > Sleep. Airplane Mode Turn On Airplane mode to disable all the terminal radios that transmit voice or data. 1. Press and hold the Power button until the Options menu displays. 2. Touch Airplane Mode to toggle the mode on or off. When Airplane Mode is turned on, shows on the status bar.
Preliminary Draft, Not for Release - Please Review 2-3-2015 3. Pull the battery latch back and remove the battery. Battery Latch 4. Insert the new battery and install the battery door. 5. Apply pressure to the edges of the battery door to ensure the door is properly closed. Engage the door lock. 6. Press the Power button . Important: All battery and connector doors must be present, undamaged, and properly closed to maintain the environmental rating of the terminal.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Connecting the Terminal to a Computer via a USB Connection You can transfer files (e.g., pictures, music, and videos) between your computer and the terminal using the supplied USB Charge/Communication cable or a Dolphin 70e Black HomeBase with a standard USB cable. Note: The terminal supports Hi-Speed USB communication (USB 2.0) with a maximum data transfer rate of 480 Mbps. 1.
Preliminary Draft, Not for Release - Please Review 2-3-2015 AutoInstall Settings Touch All Apps > AutoInstall Settings . If AutoInstall is enabled, the Internal storage\Honeywell\Autoinstall folder on the Dolphin terminal is searched for zip files containing applications. Each zip file is compared to the applications presently installed on the Dolphin terminal: • If the application is not installed, AutoInstall installs the application.
Preliminary Draft, Not for Release - Please Review 2-3-2015 2 - 14
Preliminary Draft, Not for Release - Please Review 2-3-2015 3 Hardware Overview Standard Configurations for the Dolphin 75e WLAN, WPAN & Camera WLAN, WPAN, NFC & Camera • • • • Android 4.4 Qualcomm APQ8074AB Processor 2GB RAM X 16GB Flash 3.7V Li-ion rechargeable standard or extended battery pack • Dedicated imager capable of decoding standard 1D and 2D bar code symbologies • 8.0 megapixel auto focus color camera • 802.11a/b/g/n/ac and Bluetooth • • • • • • • • Android 4.
Preliminary Draft, Not for Release - Please Review 2-3-2015 QuadCharger (Model COMMON-QC) The QuadCharger is a compact 4-slot battery charging station designed for use with Dolphin 75e 3.7V Li-ion rechargeable batteries. For additional information on the common QuadCharger, visit the Dolphin 75e product page at www.honeywellaidc.com or contact your local sales representative. Accessories for the Dolphin 75e Each of the following items is sold separately to enhance your terminal’s capabilities.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Features of the Dolphin 75e Front, Bottom, and Right Panels For a description of each callout, see page 3-4.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Feature Descriptions: Front, Bottom, and Right Panels Back Button By default, the Back button returns you to the previous screen. Bottom Speaker The integrated bottom speaker sounds audio signals as you scan bar code labels and enter data. The integrated speaker also supports playback of wave and MP3 files, software mixer, and speaker phone for VoIP audio.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Touch Panel Display The color 4.3 inch (liquid crystal display (LCD) touch panel is covered with an industrial, protective lens for greater durability. The wide video graphic array (WVGA) display resolution is 800 X 480. The touch panel can be activated with a finger or with the optional stylus. The touch panel backlight illuminates when the screen is touched.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Back, Top, and Left Panels For a description of each callout, see page 3-7.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Feature Descriptions: Back, Top, and Left Panels Audio Jack The audio jack is located under the protective door on the top of the terminal. To access the jack gently lift the edge of the door marked with an arrow. The 3.5mm audio jack supports both speaker (stereo) and microphone (mono) headsets. Battery The 3.7V Li-ion rechargeable battery provides the main power for the terminal and is protected by the battery door.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Power Button The Power button button is pressed. located on the top of the terminal initiates multiple functions depending on the length of time the • A quick press of the button toggles Suspend Mode On or Off. To modify this feature, see Power Key on page 6-2.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Important Battery and Battery Door Replacement Guidelines Follow the guidelines listed below when ordering batteries and/or battery doors. • Size (e.g., standard or extended): The battery and battery door must be the same size. • Type (e.g., locking or non-locking): The battery and battery door must match your terminal type. See details above.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Important Charging Guidelines Source Current Specifications Battery charging times can be significantly lengthened or charging may not occur if the terminal is drawing more currant than is supplied by the charging peripheral (e.g., HomeBase, eBase, Mobile Base, or ChargeBase), USB wall charger, or USB Host (e.g., workstation PC). • The maximum current supplied through a charging peripheral is 2.0A.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Checking Battery Power and Monitoring Battery Power Use Touch All Apps > Settings > Battery to display information the battery status (charging or discharging), the level (percentage) of charge remaining on the battery, and a breakdown of battery usage statistics for any running apps and services. Battery level and Battery status. Touch to view History details. Touch an item to view usage details and adjust power use.
Preliminary Draft, Not for Release - Please Review 2-3-2015 • Never throw a used battery in the trash. Promptly dispose of used batteries in accordance with local regulations. • Do not short-circuit a battery or throw it into a fire; it can explode and cause severe personal injury. Do not allow metallic conductive objects to contact battery terminals. • If you observe that the Honeywell battery supplied is physically damaged, please send it to Honeywell International Inc.
Preliminary Draft, Not for Release - Please Review 2-3-2015 3. Pull the battery latch back and remove the battery. Battery Latch 4. Lift the card retention flap, slide the memory card (contacts facing down) into the socket, and then close the retention flap. Memory Card Socket Memory Card (contacts facing down) Retention Flap 5. Install battery and battery door. Apply pressure to the edges of the battery door to ensure the door is properly closed, and then engage the door lock. 6.
Preliminary Draft, Not for Release - Please Review 2-3-2015 3 - 14
4 Preliminary Draft, Not for Release - Please Review 2-3-2015 Using the Scan Image Engine Overview The Dolphin 75e terminal houses a compact image engine that instantly reads popular 1D and 2D bar codes and supports omni-directional aiming and decoding for greater flexibility in real-world settings. The image engine can also capture black and white digital images, such as signatures and pictures of damaged inventory.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Supported Bar Code Symbologies Symbology Type Symbology Name 1D Symbologies Codabar Code 3 of 9 Code 11 Code 32 Pharmaceutical (PARAF) Code 93 Code 128 EAN with Add-On EAN with Extended Coupon Code EAN-8 EAN-13 GS1-128 GS1 Databar Interleaved 2 or 5 ISBT 128 Matrix 2 of 5 MSI Plessey Straight 2 of 5 IATA Straight 2 of 5 Industrial Telepen Trioptic Code UPC with Add On UPC-A UPC-E Aztec Codablock A Codablock F Data Matrix GS1 Databar MaxiCode
Preliminary Draft, Not for Release - Please Review 2-3-2015 4. The bar code is decoded and the results appear on the screen. Decode Results Scan Statistics See Configuring the Scan Demo Application on page 4-4. Touch the dots or swipe left or right to scroll through the decode results of past scans. Automatic Scanning Enable Automatic scanning mode to activate the imager for continuous scanning without requiring the operator to touch Scan for each bar code presented in the field of view of the imager.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Configuring the Scan Demo Application 1. Open the Scan Demo application, and then press the Menu button 2. Touch Setting or Symbology Setting . . Touch Setting to access the Scan Demo settings screen. Touch Symbology Setting to access the Symbologies Settings screen. 3. Modify the settings to meet your application needs, and then press the Back button screen.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Touch to access the advanced symbology settings. Check the box to enable a symbology. Using the ScanTool Power Tool Note: Detailed information on the ScanTool Power Tool is provided in the Dolphin Power Tools for Mobile Devices Powered by Android™ User’s Guide, available for download at www.honeywellaidc.com. 1. Touch All Apps > Power Tools > ScanTool . 2. Touch one of the Quick Start applications.
Preliminary Draft, Not for Release - Please Review 2-3-2015 3. Touch the arrow box to view and modify the advanced settings (e.g. suffix, prefix, minimum and maximum length) for the symbology. Aiming Beam The aiming beam is smaller when the terminal is held closer to the code and larger when it is farther from the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas symbologies with larger bars or elements (mil size) should be read farther from the unit.
Preliminary Draft, Not for Release - Please Review 2-3-2015 2. Point the Dolphin terminal at the object. 3. Adjust the terminal’s position until the object appears on the touch screen the way you want it to appear in the image. Note: Touch the 4. Touch to toggle the targeting cross hair on the touchscreen on or off. or press the Scan button to capture the image. 5. To save the captured image, press the Menu button. 6.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Using the Signature Demo The Signature Demo captures a signature on the touch screen. 1. Touch All Apps > Demos . Swipe right to scroll to the Signature Demo, then touch . 2. Using a finger or the optional stylus, sign the touch screen. Touch screen signature area. Date Stamp Touch to clear signature screen without saving. Touch to adjust the pen width of the signature displayed on the screen. Touch to save image of signature. 3.
Preliminary Draft, Not for Release - Please Review 2-3-2015 5 Using the Color Camera Overview Dolphin 75e terminals are equipped with 8.0-Megapixel auto focus cameras to provide easy integration of color picture and video capture into business applications. The camera lens and camera flash are located on the back panel of the terminal. Camera Lens Camera Flash Pictures and videos captured using the Camera app are stored on the micorSD card in the DCIM folder under Camera (mnt\sdcard\DCIM\Camera).
Preliminary Draft, Not for Release - Please Review 2-3-2015 Note: Touch the thumbnail preview to access options to share the picture. Select the picture again to open the Gallery app where you can edit or delete the picture by pressing the Menu button. 6. Press the Back button to close the app. Taking a Panoramic Picture 1. Open the Camera 2. Touch app (see page 5-1). to switch to panorama mode. 3. Point the camera lens at the beginning of the scene you want capture. 4. Touch a guide.
Preliminary Draft, Not for Release - Please Review 2-3-2015 6 Settings Overview The Settings allows you to verify and/or alter system parameters to customized your terminal to meet your specific needs. Touch All Apps > Settings or pull down the notification panel, and then touch the Settings icon next to the date. Wireless & Network Settings See "Wireless & Networks Settings" on page 7-1 and Establishing Ethernet Communication on page 10-6.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Auto-rotate screen By default, the display automatically adjusts the orientation of the screen between landscape and portrait when the terminal is rotated. Touch the Auto-rotate screen checkbox to toggle the option on or off. Sleep The Sleep setting enables you to customize backlight functionality for the display.
Preliminary Draft, Not for Release - Please Review 2-3-2015 • Downloaded Displays all apps downloaded to the terminal. To sort the list, press the Menu button , and then touch Sort by size or Sort by name. • On SD Card Displays only apps designed to be stored either on the SD card or on the internal storage of the terminal. A green checkmark indicates the app is stored on the SD card. Apps that prohibit movement do not appear on the list.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Personal Settings Accounts & sync Touch Accounts & sync from the Settings screen to add, remove, and manage exchange accounts (e.g., e-mail) and allow apps to automatically schedule and sync data. To add an account: 1. Touch All Apps > Settings > Accounts & Sync. 2. Touch Add account. 3. Touch the type of account to add. 4. Follow the on-screen instructions to enter the required information for the account type selected.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Encryption You can encrypt all the data on your Dolphin terminal using the Encrypt phone option as an advanced security measure in case your device is ever lost or stolen. When the terminal is encrypted, you must enter a numeric PIN or password each time you turn the power on. The Screen Lock PIN or password you set up is the same PIN or password used for encryption security and cannot be set independently. Warning: You cannot reverse encryption.
Preliminary Draft, Not for Release - Please Review 2-3-2015 2. Touch All Apps > Settings > Security > Credential Storage. 3. Touch Install from SD card. 4. Touch the file name of the certificate to install and enter a password if required. 5. Touch OK. 6. Enter the name of the certificate, and then touch OK. Note: Once an encrypted certificate is installed on the terminal, it is automatically deleted from the SD card.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Backup & reset Touch Backup & reset from the Settings screen to access options for backing up and restoring your data, settings, and account information on the terminal. There are three options available under the Backup & Restore heading: • Back up my data - Touch to enable or disable backing up your app data, Wi-Fi passwords, and other settings to Google servers.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Touch Status to view following terminal information: • • • • • • • battery status, remaining charge level of the battery, signal strength, service state, Wi-Fi MAC address, Bluetooth address, and serial number. Note: The content of the About phone and Status screen are base on the terminal model type.
7 Preliminary Draft, Not for Release - Please Review 2-3-2015 Communication Wireless & Networks Settings Under the Wireless & Networks heading on the Settings screen there are options for turning the onboard wireless radios in the terminal on or off and for configuring network connections. Connecting the Terminal to a Wireless Network You connect the terminal to a wireless network through the on-board radios (802.11a/b/g/n and/or Bluetooth).
Preliminary Draft, Not for Release - Please Review 2-3-2015 Wi-Fi Network Connections Turning Wi-Fi Networking On or Off 1. Touch All Apps > Settings . 2. Touch the Wi-Fi OFF/ON toggle box to turn the radio or . Connecting to a Wi-Fi Network 1. Touch All Apps > Settings 2. Verify the Wi-Fi is turned > Wi-Fi. . 3. The terminal searches for available Wi-Fi access points within range of the device.
Preliminary Draft, Not for Release - Please Review 2-3-2015 • Network notification Turn on or off available Wi-Fi network notification. • Keep Wi-Fi on during sleep Set how the Wi-Fi radio reacts when the terminal enters sleep (Suspend) mode (i.e., Always, Only when plugged in, or Never). • Wi-Fi idle timeout. Adjust how long the Wi-Fi may be idle before the radio is automatically turned off (i.e.
Preliminary Draft, Not for Release - Please Review 2-3-2015 • Scan and add networks. • View general information on current and scanned access points. • View detailed information on the current access point and roaming statistics. Note: On the Power Tools screen, select Connection Manager Wireless Manager for direct access the manager without opening the . Note: Refer to the User’s Guide for Dolphin Power Tools for Mobile Devices powered by Android for additional information.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Disconnecting from a VPN 1. Drag the status bar down from the top of the touch screen to view the Notification panel. 2. Touch the VPN connection notification to disconnect. Ethernet Communication See "Establishing Ethernet Communication" on page 10-6.
Preliminary Draft, Not for Release - Please Review 2-3-2015 7-6
8 Preliminary Draft, Not for Release - Please Review 2-3-2015 Working with Bluetooth and NFC Technology Bluetooth Technology Turning the Bluetooth Radio On or Off Bluetooth™ is a short-range wireless communications technology used to exchanged data between devices over a distance of approximately 26.2 feet (8 meters). Before you can connect or pair your terminal to another device using Bluetooth technology, you must first turn on the Bluetooth radio. 1. Touch All Apps > Settings . 2.
Preliminary Draft, Not for Release - Please Review 2-3-2015 1. Touch All Apps > Settings . 2. Verify the Bluetooth radio is activated . 3. Touch Bluetooth. 4. Touch Dolphin 75e (default terminal name) at the top of the screen to make the device discoverable. The terminal starts a 2 minute count down during which time the terminal is temporarily discoverable by other devices using Bluetooth technology.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Near Field Communication (NFC) Technology NFC technology provides the ability for short-range, wireless data transfer between the terminal and NFC tags or other NFC enabled devices placed in close proximity to the back of the terminal. Suspend mode and the screen lock temporarily turns the NFC radio off.
Preliminary Draft, Not for Release - Please Review 2-3-2015 5. Touch Select SE then choose the embedded secure element (eSE) SmartMX. Note: If you want to turn off a previously selected SE, select None from the Select SE > Change SE list. Card Emulation is enabled (checked) by default when an SE is selected. Reading NFC Tags 1. Verify NFC is enabled (see page 8-3). 2. Hold the NFC tag close to the back of the terminal.
Preliminary Draft, Not for Release - Please Review 2-3-2015 To Write a contact on an NFC tag: 1. Touch NFC Tag Demo 2. Touch Write a contact from inside the NFC Demos app. . 3. Select a contact from your saved contacts list. 4. Hold the writable or rewritable NFC tag close to the back of the terminal. A “Write successful” popup message displays on the screen. To Write a message on an NFC tag: 1. Touch NFC Tag Demo 2. Touch Write a message from inside the NFC Demos app. . 3.
Preliminary Draft, Not for Release - Please Review 2-3-2015 8. Touch the reduced screen image. The terminal automatically initiates a Bluetooth pairing. Once pairing is complete, the file is sent. The file image and saved location are displayed on the receiving terminal screen when the transfer is successful. By default, the file is saved to the root Honeywell/nfcbtdemo folder of the microSD card. 9. Select the Back button to exit the demo.
Preliminary Draft, Not for Release - Please Review 2-3-2015 9 Dolphin 70e Black HomeBase (Model 70e-HB) Overview The Dolphin 70e Black HomeBase (Model 70e-HB) is a charging and communication cradle that supports USB Hi-Speed 2.0v communication, which enables the terminal to interface with the majority of PC-based enterprise systems. The HomeBase also contains an auxiliary battery well that charges a spare Honeywell standard or extended battery.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Capacity The base holds one terminal and features an auxiliary battery well behind the terminal well that can charge a battery pack independently of the terminal well. This means that one base can charge two battery packs: the one installed in the terminal and a spare. ! We recommend use of Honeywell peripherals, power cables, and power adapters.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Parts and Functions Front Panel Auxiliary Battery Well Terminal Well 2 COMM LED AUX Battery LED Dock LED Terminal Well Place the terminal in this well to communicate with a host device, power the terminal, and charge the installed battery pack. The base completely charges the main battery in a Dolphin terminal in 4 hours for the standard battery or 6 hours for the extended battery.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Back Panel Auxiliary Battery Well USB Port DC Power Jack Auxiliary Battery Well The base enables you to charge an additional battery pack independently of the terminal well in 4 hours for the standard battery or 6 hours for the extended battery. This feature ensures that you can always have a fully-charged battery for your terminal. See "Charging a Spare Battery in the Auxiliary Battery Well" on page 9-5 USB Port This USB port is USB v2.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Connecting Power to the HomeBase Power Adapter 1. Plug the A/C power cord into the power adapter. 2. Plug the power cable into the power connector on the back of the HomeBase. A/C Power Cord 3. Plug the A/C power cord into a grounded power source. 4. The base is now powered. Power Cable Charging the Main Battery The base provides power to the Dolphin terminal and allows the charging of the terminal’s battery.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Communication Dolphin terminals support USB communications out of the box. The base also supports USB communications via the USB port located on the back. The base acts as a USB device by interfacing the USB signals of the Dolphin terminal to the USB of the host workstation. Using a standard USB cable, the base’s USB interface allows the Dolphin terminal to communicate with a workstation.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Installing the DIN Rail 1. Slide the DIN rail into the slot along the bottom panel of the base. DIN Rail Slot 2. Use the appropriate hardware to secure the DIN rail to the desk or flat surface.
Preliminary Draft, Not for Release - Please Review 2-3-2015 9-8
Preliminary Draft, Not for Release - Please Review 2-3-2015 10 Dolphin 70e Black eBase (Model 70e-EHB) Overview The Ethernet Base (eBase) enables a single Dolphin 75e computer to communicate with a host device over an Ethernet network. The 70e-EHB charger is designed for use with the following Dolphin models and batteries, manufactured for Honeywell International Inc: Dolphin Model Battery Model No. Battery Part No. Battery Specification Dolphin 75e 70e-BTSC BAT-STANDARD-02 Li-ion 3.7V, 6.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Capacity The base holds one terminal and features an auxiliary battery well behind the terminal well that can charge a battery pack independently of the terminal well. This means that one base can charge two battery packs: the one installed in the terminal and a spare. Dimensions 65.6 mm [2.58 inches] 129.3 mm [5.09 inches] Weight eBase weight: 310g [.683 lbs] Note: Weight excludes packaging, cables and power supply. 10 - 2 116.3 mm [4.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Parts and Functions Front Panel Auxiliary Battery Well Terminal Well 2 COMM LED AUX Battery LED Dock LED Terminal Well Place the terminal in this well to communicate with a host device, power the terminal, and charge the installed battery pack. The eBase completely charges the main battery in a Dolphin terminal in 4 hours for the standard battery or 6 hours for the extended battery.
Preliminary Draft, Not for Release - Please Review 2-3-2015 COMM LED Indicates the status of the connection and data transfer between the Dolphin terminal and the host device. This color means… Green A USB Connection is established with the host workstation. Note: Ethernet activity is indicated by RJ45 integrated LED on the back panel of the base.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Bottom Panel For details on how to mount the eBase, see Mounting the eBase on page 10-8. Serial Number Label MAC Address Label Compliance Label Power The base requires 12 Volts DC input for communications, battery charging, and power output to the terminal; the power adapter included with the base converts the voltage from the AC power source to 12 Volts DC.
Preliminary Draft, Not for Release - Please Review 2-3-2015 1. Install the battery pack in the terminal; see page 2-1. 2. Slide the terminal into the terminal well. The Dock LED illuminates blue. Battery charging begins immediately if required by the Dolphin terminal. Note: When the terminal is docked, the Battery Icon changes from to indicating the terminal is running on external power. Battery charging occurs in the background.
Preliminary Draft, Not for Release - Please Review 2-3-2015 1. Touch All Apps > Settings > Ethernet configuration. 2. Select Ethernet configuration, again. 3. Select Static IP under Connection Type, and then input the IP address and any additional information based on your network configuration. 4. Touch Save. Ethernet Proxy Settings To set up a proxy to use when accessing your network with Ethernet: 1. Touch All Apps > Settings > Ethernet proxy settings. 2. Input the Proxy host name and Proxy port.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Mounting the eBase Set the base on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is in the base.
Preliminary Draft, Not for Release - Please Review 2-3-2015 10 - 9
Preliminary Draft, Not for Release - Please Review 2-3-2015 10 - 10
Preliminary Draft, Not for Release - Please Review 2-3-2015 11 Dolphin 70e Black Mobile Base (Model 70e-MB) Overview The Dolphin Mobile Base charging cradle is designed specifically for in-premise and in-transit data collection applications. The base features a mounting bracket and a cigarette lighter adapter to adapt it to your environment. The 70e-MB charger is designed for use with the following Dolphin models and batteries manufactured for Honeywell International Inc: Dolphin Model Battery Model No.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Mobile Base Components Terminal Charging Well Speaker Spring Latch Power Adapter Power Jack Speaker Volume Control Mounting Lever Two point Adjustable Arm Suction Cup Base Adjustable Arm with Suction Cup Base for Windshield Mounting The Mobile Base includes a two point adjustable arm with a suction cup base for fixed mount locations (e.g., a car windshield).
Preliminary Draft, Not for Release - Please Review 2-3-2015 Mounting the Mobile Base Safety Precautions Honeywell is not responsible for any damages caused to you, your vehicle, or other individuals due to the installation of the Dolphin Mobile mount. Follow these safety precautions when mounting the mobile base: ! Do not mount the base in a location where it prevents safe operation of the vehicle and/or impedes the vehicle operator's field of view.
Preliminary Draft, Not for Release - Please Review 2-3-2015 3. To adjust the angle of the bracket arm, twist the thumb screws counterclockwise to loosen the locks. Reposition the angle of the arm, and then twist the knobs clockwise to lock the arm into position. Thumb screws for arm angle adjustments. 4. Insert the power cable connector into the power jack on the Mobile Base. 5. Twist the cable connector 90° clockwise to engage the cable lock. 4 5 6.
Preliminary Draft, Not for Release - Please Review 2-3-2015 To Power a Terminal and Charge its Main Battery ! Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty. ! We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. 1. Install the main battery in the terminal; see Install the Battery on page 2-1. 2.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Removing the Cable ! Attempting to remove the cable without disengaging the lock may result in damage to the base and power cable not covered by the warranty. 1. Twist the cable 90° counterclockwise to disengage the cable lock. 2. Remove the cable from the power jack.
Preliminary Draft, Not for Release - Please Review 2-3-2015 12 Dolphin 70e Black ChargeBase (Model 70e-CB) Overview The Dolphin 70e Black ChargeBase is a 4-slot charging cradle that can power four Dolphin terminals, and charge their main batteries in 4 hours for the standard battery or 6 hours for the extended battery. The 70e-CB charger is designed for use with the following Dolphin models and batteries manufactured for Honeywell International Inc: Dolphin Model Battery Model No. Battery Part No.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Dimensions 59.75 mm [2.35 inches] 427.11 mm [16.80 inches] 98.8 mm [3.89 inches] Weight ChargeBase weight: 674g [1.49 lbs.] Note: Weight excludes packaging, cables and power supply. Parts and Functions Front Panel Terminal Wells (Qty. 4) Dock LED (Qty. 4) Terminal Wells The base contains four terminal wells, which offer independent battery charging for each docked terminal.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Back Panel Power Supply Connector Power Supply Connector This connector receives input from the power adapter. Plug the power connector cable from the power adapter into this connector. Bottom Panel For details on how to mount the base, see Mounting the ChargeBase on page 12-4. Serial Number Label Compliance Label Power The terminal requires 12 Volts DC input for battery charging and power output to the terminal.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Connecting Power to the ChargeBase Power LED A/C Power Cord Power Connector Cable Power Adapter 1. Plug the A/C power cord into the power adapter. 2. Plug the power cable into the power connector on the back of the ChargeBase. 3. Plug the A/C power cord into a grounded power source. 4. The base is ready to begin charging terminals.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Bottom Panel DIN Rail Slot Rubber Feet, Qty. 6 Optional DIN Rail Mount A DIN rail (7.5 X 35 mm) may be installed on the bottom of the base to provide the optional security of mounting the base to a flat horizontal surface with hardware. Additional Hardware • DIN Rail, Qty. 1 • 3/16 in. dia x 5/8 in. long pan head screw, Qty. 2 • 1/2 in. OD x 7/32 in. ID x 3/64 in. thick washer, Qty. 4 • 3/16 in. dia nut, Qty.
Preliminary Draft, Not for Release - Please Review 2-3-2015 12 - 6
Preliminary Draft, Not for Release - Please Review 2-3-2015 13 Dolphin 70e Black Net Base (Model 70e-NB) Overview The Net Base enables up to four Dolphin 75e handheld computers to communicate with a host device over an Ethernet network. In addition, the Net Base provides a second RJ45 Ethernet port for connection to an additional device such as a printer, workstation, Net Base, or another Net Base.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Dimensions 59.75 mm [2.35 inches] 427.11 mm [16.80 inches] 98.8 mm [3.89 inches] Weight Net Base weight: 694g [1.53 lbs.] Note: Weight excludes packaging, cables and power supply. Parts and Functions Front Panel Terminal Wells (Qty. 4) Dock LED (Qty. 4) Terminal Wells The base contains four terminal wells, which offer independent battery charging for each docked terminal.
Preliminary Draft, Not for Release - Please Review 2-3-2015 DOCK LEDs The Dock LED indicates if the terminal is properly seated in the charging well. Each well has a dedicated Dock LED, which illuminates blue when a terminal is properly seated in the charging well. Back Panel Yellow LED (Qty. 1 Per Port) Green LED (Qty. 1 Per Port) Port 1: 10/100Mbps RJ45 Ethernet Port Port 2: 10/100Mbps RJ45 Ethernet Port DC Power Jack RJ45 Ethernet Ports The Net Base contains two RJ45 Ethernet ports.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Bottom Panel For details on how to mount the base, see Mounting the Net Base on page 13-6. MAC Address Label Serial Number Label Compliance Label Power The terminal requires 12 Volts DC input for battery charging and power output to the terminal. The power adapter included with the base, converts the voltage from the AC power source to 12 volts DC.
Preliminary Draft, Not for Release - Please Review 2-3-2015 1. Install the battery in the terminal, see page 2-1. 2. Slide the Dolphin terminal into one of the four terminal wells. The Dock LED for the well illuminates blue. Charging begins immediately if required by the Dolphin terminal. Note: When the terminal is docked, the Battery Icon changes from to indicating the terminal is running on external power. Battery charging occurs in the background.
Preliminary Draft, Not for Release - Please Review 2-3-2015 1. Touch All Apps > Settings > Ethernet proxy settings. 2. Input the Proxy host name and Proxy port. If required, designate when to bypass the proxy. 3. Select Done. Displaying the Net Base and Terminal IP Address Once the Dolphin terminal has been successfully connected to the network through Net Base, the terminal uses the Net Base IP address. The IP address can be used by any application on the Dolphin terminal.
Preliminary Draft, Not for Release - Please Review 2-3-2015 Installing the DIN Rail 1. Slide the DIN Rail into the DIN Rail slot on the bottom panel of the base. DIN Rail 2. Turn the base and DIN Rail right side up. 3. Use the appropriate hardware to secure the DIN Rail to a stable, flat horizontal surface.
Preliminary Draft, Not for Release - Please Review 2-3-2015 13 - 8
14 Preliminary Draft, Not for Release - Please Review 2-3-2015 Customer Support Product Service and Repair Honeywell International Inc. provides service for all of its products through service centers throughout the world. To obtain warranty or non-warranty service, please visit www.honeywellaidc.com, and select Support > Contact Service and Repair to see your region’s instructions on how to obtain a Return Material Authorization number (RMA #). You should do this prior to returning the product.
Preliminary Draft, Not for Release - Please Review 2-3-2015 HII’S RESPONSIBILITY AND PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT WITH NEW OR REFURBISHED PARTS.
Preliminary Draft, Not for Release - Please Review 2-3-2015
Preliminary Draft, Not for Release - Please Review 2-3-2015 Honeywell Scanning & Mobility 9680 Old Bailes Road Fort Mill, SC 29707 www.honeywellaidc.
