Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 OneWireless Extended Temperature Multinode Professional Installation Guide Honeywell Industrial Automation and Control Ft. Washington, Pennsylvania NOTICE – HONEYWELL INTERNATIONAL, INCORPORATED TRADE SECRET - PROPRIETARY Proprietary Notice: This document and the information contained herein are confidential to, and the property of Honeywell, Inc.
Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 APPROVAL SIGNATURES _________________________________________________________________ Soroush Amidi, Product Marketing Date _________________________________________________________________ William Osei-Bonsu, Hardware Engineering Date _________________________________________________________________ David Shipley, Agency Compliance Date Revision Record Revision AT6 FCF: Date 03-JUL-2008 Purpose/Distribution Draft for Peer Review an
Honeywell Proprietary and Confidential AT8 51121312 REVISIONS TABLE OF CONTENTS 1 DESIGNATION, SCOPE AND PREFACE........................................................................................... 6 1.1 DESIGNATION ..................................................................................................................................... 6 1.1.1 Model Numbers and Revisions :..................................................................................................6 1.2 SCOPE ....
Honeywell Proprietary and Confidential 11.1 11.2 AT8 51121312 REVISIONS DSSS, FHSS 2.4GHZ RADIO: ......................................................................................................... 20 802.11A/B/G ACCESS POINT AND BRIDGE (MESH) RADIO ................................................................... 21 12 EQUIVALENT ISOTROPICALLY RADIATED POWER (EIRP)........................................................ 22 13 EIRP LIMITS, DSSS 2.4GHZ RADIO ....................................
Honeywell Proprietary and Confidential AT8 51121312 REVISIONS LIST OF FIGURES Figure 1 –Diagram of Multinode Unit showing various external attributes ____________________________ 12 Figure 2 – Dimension of the Multinode Device _________________________________________________ 17 LIST OF TABLES Table 1 – Assembly Number and Revision........................................................................................................... 6 Table 2 –Table of Abbreviations and Definitions .................
Honeywell Proprietary and Confidential 1 AT8 51121312 REVISIONS DESIGNATION, SCOPE AND PREFACE 1.1 Designation HONEYWELL ONEWIRELESS MULTINODE DEVICE. 1.1.1 Model Numbers and Revisions : This document is valid for the following Multinode assembly number: MULTINODE EXTENDED TEMPERATURE Model Hardware Assembly Description Number # / Revision Multinode Extended Temperature – 802.11a/b/g and WNMF 51153884-200 / C 2.4GHz FHSS Radios WNMS 51153884-201 / C Multinode Extended Temperature – 802.
Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 1.4 Abbreviations & Definitions The term Honeywell Multinode Device (or simply Multinode) will be used to describe the composite unit which includes the Honeywell DSSS or FHSS Radio Board, 3eTI Mesh Board, Power Supply board, and all subassemblies housed inside the Multinode enclosure.
Honeywell Proprietary and Confidential 2 AT8 51121312 REVISIONS FEDERAL COMMUNICATION COMMISSION (FCC) 2.1 FCC Compliance Statements This device complies with Part 15 of FCC Rules and Regulations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
Honeywell Proprietary and Confidential 4 AT8 51121312 REVISIONS RF Safety Statement: To comply with FCC’s and Industry Canada’s RF exposure requirements, the following antenna installation and device operating configurations must be satisfied. Remote Point-to-Multi-Point antenna(s) for this unit must be fixed and mounted on outdoor permanent structures with a separation distance between the antenna(s) of greater than 20cm and a separation distance of at least 20cm from all persons.
Honeywell Proprietary and Confidential 5 5.1 5.2 FCF: 51121312 REVISIONS AT8 FCC and Industry Canada (IC) Identification Numbers: FCC Identification Numbers: • Honeywell Multinode DSSS Radio o Limited Modular Approval o Federal Communication Commission Identification: S57 - 51306343 • Honeywell Multinode FHSS Radio o Limited Modular Approval o Federal Communication Commission Identification: S57 - WNMNFHSS • Honeywell Extended Temperature Multinode 802.
Honeywell Proprietary and Confidential 6 51121312 REVISIONS AT8 INTENDED COUNTRY USAGE 6.1 NORTH AMERICA Country UNIIITED STATES CANADA 6.2 ISO 3166 2 letter code US CA AUSTRALIA AND NEW ZEALAND Country AUSTRALIA NEW ZEALAND 6.
Honeywell Proprietary and Confidential 7 AT8 51121312 REVISIONS MULTINODE GENERAL DESCRIPTION 7.1 Intended Use The Multinode unit is a key component of the Honeywell Wireless Network for Secure Industrial Application (WNSIA). It provides wireless mesh connectivity for wireless sensor networks and wireless worker appliances. The Multinode uses powerful radios to communicate with gateway devices connected to a wired DCS network, and a low-powered radio to communicate with wireless sensors.
Honeywell Proprietary and Confidential 8 AT8 51121312 REVISIONS PRODUCT SPECIFICATIONS 8.1 Direct Sequence Spread Spectrum (DSSS) Radio, 2.4GHz Warning! The Multinode unit must be Professionally Installed in accordance with the requirements specified in this document. See Section 10, for professional installation maximum power setting requirements.
Honeywell Proprietary and Confidential 8.2 AT8 51121312 REVISIONS Frequency Hopping Spread Spectrum (FHSS) Radio, 2.4GHz Warning! The Multinode unit must be Professionally Installed in accordance with the requirements specified in this document. See Section 10, for professional installation maximum power setting requirements. Only the specified power settings, antenna types and gains and cable lengths (attenuation) as outlined in this document are valid for Multinode installations.
Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 8.3 IEEE 802.11a/b/G (Wi-Fi) Radios The Multinode has two IEEE 802.11 radios for implementing client (access point) and mesh (bridge) networks. Warning! The Multinode unit must be Professionally Installed in accordance with the requirements specified in this document. See Section 11, for professional installation maximum power setting requirements.
Honeywell Proprietary and Confidential 8.4 51121312 REVISIONS AT8 Multinode User Environment Item Specification Operating Temperature: Storage Temperature: Operating Humidity: -40 OC to +75 OC -40 OC to +75 OC 0 to 100% RH Table 6 – Specifications User Environment Multinode Device. 8.5 Multinode Power Specifications Item Operating Voltage: Power Consumption (typical): Specification 20.4Vdc to 26.4Vdc 25W Table 7 – Power Specifications Multinode Device. 8.
Honeywell Proprietary and Confidential 8.7 AT8 51121312 REVISIONS Dimensions Figure 2 – Dimension of the Multinode Device FCF: OneWireless Extended Temperature Multinode Professional Installation Guide FMF: Made by: David Shipley Issue: AT8, 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W A 51121312 SIZE Sh. No.
Honeywell Proprietary and Confidential 9 AT8 51121312 REVISIONS Cables 9.1 External Interface Cables Cable Type Specification External CAT5E Ethernet Stranded Core 24VDC Power Ground Conductor Note: • • • Multiconductor, AWG AWG10 Qty Comments/Specification 2 Routed through conduit hub.
Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 9.2 Antenna Cables Cable Honeywell Application Part # DSSS, FHSS, 50018278-001 802.11 DSSS, FHSS, 50018278-003 802.11 DSSS, FHSS, 50018278-010 802.11 Cable Type 400 Series 400 Series 400 Series Connector Type NM – NM Frequency Length (GHz) (m) 2.4/5.8 1 Loss (dB) 1.0 / 2.0 NM – NM 2.4/5.8 3 1.5 / 2.5 NM – NM 2.4/5.8 10 2.5 / 3.5 Table 9 - Antenna Cable Specifications for Multinode Device. 10 Antenna Lightning Arrestors 10.
Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 11 Approved Antenna Types/Gains 11.1 DSSS, FHSS 2.
Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 11.2 802.11a/b/g Access point and Bridge (Mesh) Radio Antenna Type Antenna Application Manufacturer Manufacturer Part Number Honeywell Part Number Beam Width Peak Gain (dBi) 3.5 Omni (integral) Point to MultiPoint Air802 ANOM245XM 51506534 -200 Omni 5.3 4.
Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 12 Equivalent Isotropically Radiated Power (EIRP) In radio communication systems, Equivalent isotropically radiated power (EIRP), or alternatively, Effective isotropic radiated power is the amount of power that would have to be emitted by an isotropic antenna (that evenly distributes power in all directions and is a theoretical construct) to produce the peak power density observed in the direction of maximum antenna gain.
Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 13 EIRP LIMITS, DSSS 2.4GHz RADIO Antenna Type Omni Omni Sector Freq. (GHz) Max. Ant. Gain (dBi) Min. Cable Length (m) Min. Cable Loss (dB) Integral 2.4 5 0 0 Remote 2.4 8 1 1.0 Remote 2.4 14 1 1.0 Radio Usage / Application Point to MultiPoint Point to MultiPoint Point to MultiPoint Max. Radio Output Power (dBm) Max.
Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 14 EIRP LIMITS, FHSS 2.4GHz RADIO Antenna Type Omni Omni Sector Freq. (GHz) Max. Ant. Gain (dBi) Min. Cable Length (m) Min. Cable Loss (dB) Integral 2.4 5 0 0 Remote 2.4 8 1 1.0 Remote 2.4 14 1 1.0 Radio Usage / Application Point to MultiPoint Point to MultiPoint Point to MultiPoint Max. Radio Output Power (dBm) Max.
Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 15 EIRP LIMITS, 802.11a (5.8GHz) Access Point and Bridge Radio Ant. Type Radio Usage / Application Freq. (GHz) Max. Ant. Gain (dBi) Min. Cable Length (m) Min. Cable Loss (dB) Omni Point to Multi-Point Integral 5.8 802.11a 7.0 0 0 Omni Point to Multi-Point Remote 5.8 802.11a 12 1 2 Sector Point to Multi-Point Remote 5.8 802.11a 17 1 2 Yagi Point to Multi-Point Remote 5.8 802.11a 16.5 1 2 Dish Fixed Pt. to Pt.
Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 16 EIRP LIMITS, 802.11a (5.4GHz) Access Point and Bridge Radio Ant. Type Radio Usage / Application Freq. (GHz) Max. Ant. Gain (dBi) Min. Cable Length (m) Min. Cable Loss (dB) Max. Radio Output Power (dBm) Max. EIRP (dBm) ProInstall Power Setting Agency/ Country Omni Point to Multi-Point Integral 5.4 802.11a 7.0 0 0 21 28 -14 ETSI Omni Point to Multi-Point Remote 5.4 802.
Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 17 EIRP LIMITS, 802.11b/g (2.4GHz) Access Point and Bridge Radio Ant. Type Radio Usage / Application Freq. (GHz) Max. Ant. Gain (dBi) Min. Cable Length (m) Min. Cable Loss (dB) Omni Point to Multi-Point Integral 2.4 802.11b/g 4.0 0 0 Omni Point to Multi-Point Remote 2.4 802.11b/g 8 1 1 Sector Point to Multi-Point Remote 2.4 802.11b/g 14 1 1 Max. Radio Output Power (dBm) Max.
Honeywell Proprietary and Confidential AT8 51121312 REVISIONS 18 Setting Power and Country Code: DSSS-FH Radio Warning! The Multinode unit must be Professionally Installed in accordance with the requirements specified in this document. Only the specified power settings, antenna types and gains and cable lengths (attenuation) as outlined in this document are valid for Multinode installations. Set the radio power level using the Authentication Device application.
Honeywell Proprietary and Confidential AT8 51121312 REVISIONS 19 Setting Power & Country Code: 802.11 Access Point & Bridge Radio Warning! The Multinode unit must be Professionally Installed in accordance with the requirements specified in this document. Only the specified power settings, antenna types and gains and cable lengths (attenuation) as outlined in this document are valid for Multinode installations.
Honeywell Proprietary and Confidential AT8 51121312 REVISIONS The authorization code is: “Raptor2007!” without the quote (YOU MUST KEEP THIS AS A SECRET) Change the following options based on values you determined in Section 11: Country Code Adjustment to Max TX power of Access Point Radio (increase or decrease) Adjustment to Max TX power of Bridge Radio (increase or decrease) After applying the changes, you will be notified to reboot the unit for any changes to take effect.
Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 19.1 Power Setting Reference Table, 802.11 Access Point & Bridge Radio: Multinode Bridge and Access Point Radio Ports WIRELESS MODE 802.11a 802.11a 802.11b/g mixed 802.11b/g mixed CHANNEL TX PWR MODE Data Rate 120 (5.6GHz) FIXED, 8 157 (5.785GHz) FIXED, 8 7 (2.442GHz) FIXED, 8 6 (2.
Honeywell Proprietary and Confidential AT8 51121312 REVISIONS 20 RF Safety, Maximum Permissible Exposure (MPE) statement To comply with FCC’s and Industry Canada’s RF exposure requirements, the following antenna installation and device operating configurations must be satisfied.
Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 21 AGENCY COMPLIANCE 21.1 Radio and EMC Certifications 21.1.1 Federal Communication Commission (FCC) Specification: FCC Part 15.247 Subpart B for unintentional radiators Specification: FCC Part 15.247 Subpart C for intentional radiators 21.1.2 Industry Canada (IC) Method: RSS-210, Issue 7 RSS-Gen, Issue 2 ICES-003, Issue 4 21.1.3 European Telecommunications Standards Institue (ETSI) Emissions Specification and Method: EN 300 328 V1.7.
Honeywell Proprietary and Confidential AT8 51121312 REVISIONS 21.2 Product Safety Agency Certifications 21.2.1 Canadian Standards Association (CSA) CSA electrical equipment requirements for use within Division 2 and Zone 2 hazardous locations. IEC61010-1 (2nd Edition, 2001-02), "Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use, part 1: General Requirements Canadian Standards Association Standard C22.2 No.
Honeywell Proprietary and Confidential AT8 51121312 REVISIONS 21.2.2 Factory Mutual (FM) FM electrical equipment requirements for use within Division 2 and Zone 2 hazardous locations. Factory Mutual Approval Standard Class No. 3600, "Electrical Equipment for Use in Hazardous (Classified) Locations - General Requirements Factory Mutual Approval Standard Class No. 3810, "Electrical and Electronic Test, Measuring, and Process Control Equipment Factory Mutual Approval Standard Class No.
Honeywell Proprietary and Confidential AT8 51121312 REVISIONS 21.2.3 European ATEX Certification (ATEX) The completely assembled Multinode will conform to European electrical equipment requirements for use within Zone 2 Hazardous Locations.