Installation Instructions

ManualsBrandsHoneywell International ManualsElectronicsDALI module without power supply

31-00305-01

Honeywell INNCOM PC50X DALI Module

Overview

The Honeywell INNCOM Digital Addressable Lighting Interface (DALI) module is a multifunctional

lighting controller which can feature as a component in the Integrated Room Automation System

(IRAS). It can communicate wirelessly via RF or Bluetooth, reducing the need for cabling or it can be

used in more traditional hardwire applications.

The module itself will be used in conjunction with other INNCOM tools for project design, installation,

commissioning and can also feature in both INNcontrol 3 and INNcontrol 5 Energy Management

Systems (EMS). To provide flexibility and efficiency, the module supports both over the air and over

the wire updates..

Beautifully designed, the compact PC50X module can be DIN-rail mounted or surface mounted by

using the 4 screw holes. It offers 2 ports to support 2 channels which can each support up to 32 DALI

devices and offers 2 I/O ports which can be used to include a door sensor. The indicative LEDs will

display the operational status and connectivity of the controller.

INSTALLATION INSTRUCTIONS

Summary of content (6 pages)

PAGE 1
Honeywell INNCOM PC50X DALI Module INSTALLATION INSTRUCTIONS Overview The Honeywell INNCOM Digital Addressable Lighting Interface (DALI) module is a multifunctional lighting controller which can feature as a component in the Integrated Room Automation System (IRAS). It can communicate wirelessly via RF or Bluetooth, reducing the need for cabling or it can be used in more traditional hardwire applications.
PAGE 2
DALI-INSTALLATION INSTRUCTIONS Before Installation WARNING! Install all equipment in accordance with the National Electric Code and in a manner acceptable to the local authority having jurisdiction. Read these carefully before installing equipment. Failure to follow all instructions may result in equipment damage or a hazardous condition. WARNING! This controller and its components may be susceptible to electrostatic discharge (ESD). Use appropriate ESD grounding techniques while handling the product.
PAGE 3
DALI-INSTALLATION INSTRUCTIONS Mounting WARNING! Be sure that the controller does not have power connected while mounting. For DIN rail mounting: 1. Using screw driver to push the active clip to downward. 2. Hang up Dali module on din rail, by the upper 2 fixed clips.
PAGE 4
DALI INSTALLATION INSTRUCTIONS 3. Move active clip to upward to fasten Dali module on din rail. 4. Insert 4 terminals into the corresponding connecters of module.
PAGE 5
DALI-INSTALLATION INSTRUCTIONS For Wall mounting: 1. Attach Dali module on wall by 4 screws as shown below: 2. Insert 4 terminals into the corresponding connectors of the module IMPORTANT! Avoid mounting in areas where acid fumes or other deteriorating vapors can attack the metal parts of the controller, or in areas where escaping gas or other explosive vapors are present. IMPORTANT！User should keep more than 20CM away from the device when operating.
PAGE 6
DALI-INSTALLATION INSTRUCTIONS Conformance statement X FCC ID: GTC-20150x.NPS This device complies with part 15.of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.