Lyric™ C1 Wi-Fi Security Camera USER MANUAL Download the Lyric app To setup and use your new security camera, search for Honeywell Lyric in the App Store or Google Play. GET IT ON Lyric Before you begin Read these instructions carefully. Failure to follow these instructions may damage the product.
Need help? If you need help at any point during the installation and setup of the Wi-Fi Security Camera, please contact Honeywell Lyric Support: Web: YourHome.Honeywell.com Email: MyLyric@honeywell.
Contents Welcome • 1 Camera overview • 2 Placement • 3 With stand • 3 Without stand • 3 Installation • 4 Download the Honeywell Lyric app • 4 Launch the Lyric app • 4 Connect the power cord • 4 Connect • 5 Connect to mobile device • 5 Connect to Wi-Fi • 5 Status LEDs • 6 Operation • 7 Remove/replace the stand • 7 Lyric app experience • 7 Reset • 7 SD card • 7 iii
App overview • 8 Livestreaming • 9 Configure alerts • 10 Select alert notification type • 10 Select alert recipients • 11 Review clips • 11 Camera settings • 12 Turn the LED on and off • 14 Turn the microphone on and off • 14 Motion detection • 15 Sound detection • 16 Smoke or carbon monoxide alarm detection • 17 Delete a camera • 18 iv
Set up detection zones • 20 Geofencing setup • 19 App settings and account info • 22 Manage messages • 23 Frequently Asked Questions • 24 Specifications • 27 FCC Regulations • 28 Warranty • 29 v
vi
Welcome Congratulations on your purchase of Honeywell’s Lyric™ C1 Wi-Fi Security Camera. You can monitor visitors, pets, and family yourself—anytime, anywhere. What’s in the box? You should find: • Honeywell Lyric C1 Wi-Fi Security Camera • Optional mounting screws • Power cord • 8 GB microSD Card Download the app To setup and use your new camera, search for Honeywell Lyric in the App Store or Google Play. After downloading, follow the instructions in the app.
Camera overview Camera lens LED indicator Power cord Reset hole Stand SD card and slot 2
Placement With stand Place the camera in a desired location for viewing and recording. Without stand You can also mount the camera directly to the wall without the stand.
Installation Download the Honeywell Lyric app Note: Have your Wi-Fi password available and confirm your router communicates at 2.4 GHz before installation. 1 2 Make sure bluetooth is enabled on your mobile device. 3 Download the Honeywell Lyric app. GET IT ON Lyric Search for Honeywell Lyric in the App Store or Google Play. Carrier 8:08 AM 100% Add New Device Select a device to installl Launch the Lyric app 4 5 Launch the Lyric app.
Connect Carrier Connect to mobile device 1 2 3 4 8:08 AM Connect Scan code to connect camera Enable bluetooth on your mobile device. The app will look for the camera. • For one camera, it will connect automatically. • For more than one camera, the app will prompt you to select one camera at a time. Each camera has a unique MAC ID printed on the back. Use that ID to select the camera you want to connect. A QR code will display in the app.
Status LEDs During Wi-Fi connection and camera operation, the LED shows the status of the camera. LED Camera state During installation Blinking Blue Powered up. Ready to begin setup. If the LED blinks blue during setup, it has lost bluetooth connection. Unplug it and plug it back in again. See “Connect the power cord” on page 4 for instructions. Solid Blue Connected to App. Ready to complete setup. Solid Red (for 2 seconds) Setup timed out, or connection failed. The LED will then turn solid purple.
Operation Remove/replace the stand The C1 Camera stand is connected to the camera by a magnet. If you want to remove the stand to hang the camera on the wall or replace the SD card, simply pull the stand off of the camera. To replace, just snap it back on the camera. Lyric app experience When you launch the application, live video from your camera is displayed. If you have multiple cameras, a list of them is displayed. Select a camera from the list to view live video from that camera.
App overview These are the controls available during livestream. Camera on/off Press to turn the camera on or off. Motion/sound detector Press to turn the motion or sound detection alerts on or off during livestream. Snapshot control Press to take pictures during livestream. Images are saved to mobile device’s photos. Push to Talk Press and hold to speak out of the camera. Release to stop. Video clips When the camera detects motion or sound, it records a clip.
Livestreaming You can use your security camera to get a live look-in wherever you place the camera. Each livestream session lasts 90 seconds. When one livestream session ends, you can start a new one if you like. Use the Push to Talk button to talk to someone through the camera. Livestreams are not saved to the SD card, and are not uploaded to your cloud storage. By default, livestreams are in HD. If data limits are a concern, change this setting to Auto or Low. See “Video quality” on page 13.
Configure alerts When the camera detects a sound or motion, it sends an alert to the app. 1 Press the Alerts icon when a red bubble appears. 2 The Alerts are displayed with the Alert type and the date/time stamp. 3 Press an alert to view the 30-second video clip. 4 Swipe left, then press Dismiss to remove the Alert. 5 To dismiss all Alerts, press Edit, then press DISMISS ALL. Select alert notification type 1 Press the side menu button on the home screen. 2 3 Press Alerts and Notifications.
Select alert recipients You can choose multiple people to have access to the camera and receive Alerts. 1 Press the side menu button on the home screen. 2 3 Press Manage Users. 4 Enter the email address of the person you want to add to the camera then press SEND. Press Add User at the bottom of the app. Review clips 1 Swipe up from the bottom of the home screen to show clips. 2 3 Press a clip to watch it. Press FILTER to sort the clips, then select a filter type (All, New, Viewed, Downloaded).
Camera settings Camera settings can be controlled in the app. You can set up things like night mode, use Lyric’s Geofencing capability, and turn on Motion or Sound Detection, and other settings. 1 Press the side menu button on the home screen. 2 Press the camera you want to change the settings on. Look for the name you gave the camera when installed. 3 To change the camera mode, press Camera Mode. 4 Press a setting for the camera mode: • Manual - turn the camera on or off using the app.
Video quality You can change the quality of your video stream. This will help limit data use on your mobile device. 1 Press the side menu button on the home screen. 2 Press the camera you want to change the settings on. Look for the name you gave the camera when installed. 3 4 Press Video Quality. Press a setting for video quality: • Auto - the camera adjusts its settings automatically. • Low - lower quality video that uses less data or bandwidth (VGA).
Turn the LED on and off If you want to turn the camera’s LED off (or back on), it is easy to do using the app. 1 Press the side menu button on the home screen. 2 Press the camera you want to change the settings on. Look for the name you gave the camera when installed. 3 Use the Camera LED switch to turn the LED on or off. Turn the microphone on and off If you want to turn the camera’s microphone off (or back on), it is easy to do using the app. 1 Press the side menu button on the home screen.
Motion detection You can turn motion detection on or off, as well as adjust the sensitivity. 1 Press the side menu button on the home screen. 2 Press the camera you want to change the settings on. Look for the name you gave the camera when installed. 3 4 Press Motion Detection. 5 Adjust how big a movement triggers a Motion Event by selecting Off, Low, Medium, or High. • Off - ignores all movement. • Low - detects only big movement. • Medium - detects general movement and changes in environment.
Sound detection You can turn sound detection on or off, as well as adjust the sensitivity. 1 Press the side menu button on the home screen. 2 Press the camera you want to change the settings on. Look for the name you gave the camera when installed. 3 4 Press Sound Detection. 5 Adjust the volume of sound that triggers a Sound Event by selecting Low, Normal, or High. • Low – detects only loud sounds, such as a motorcycle or food processor, around 80–100 decibels.
Smoke or carbon monoxide alarm detection If your smoke or carbon monoxide alarm goes off and your camera is on, it will send you an alert that a smoke or CO alarm has been detected. To test this feature, press and hold the Test button on your smoke/CO detector for at least 5 seconds or 3 cycles of the detector’s alarm. A shorter test might not trigger a sound event.
Delete a camera If you need to remove a camera from your account, it is easy to do using the app. 1 Press the side menu button on the home screen. 2 Press the camera you want to delete. Look for the name you gave the camera when installed. 3 4 Press Camera Configuration. Press DELETE CAMERA. Note: Deleting the camera from the app will result in losing all stored video clips that have not been saved to another device. 5 To re-install the camera, follow the steps in “Launch the Lyric app” on page 4.
Geofencing setup If you set up the camera to use geofencing to turn itself on and off, the camera will sense where you are through the location of your mobile device. Note: Turn geofencing on in the camera settings. See “Camera settings” on page 12. 1 Press the side menu button on the home screen. 2 3 Press Geofence. 4 When geofencing is on, the Location Status will indicate whether you are Home or Away.
Set up detection zones Draw your own alert zones for extra sensitivity or to ignore background motion such as a ceiling fan. 1 Press the side menu button on the home screen. 2 Press the camera you want to change the settings on. Look for the name you gave the camera when installed. 3 Press Motion Detection. Note: The app will need access to the camera so you can set up detection zones. 4 The default area for Zone 1 is the entire snapshot. To re-size, drag the rectangle from any corner or edge.
Set up detection zones 6 7 8 Press Zone 2. Press Enable this Detection Zone. Re-size or re-locate Zone 2 the same way you did Zone 1. Note: Zones can not overlap.
App settings and account info Follow these steps to see app settings such as version info, help, etc. 1 Press the side menu button on the home screen. 2 3 Press App Settings & Info. Select any of the menu options for more information. Follow these steps to see your account information, such as name, email address, password reset, etc. 1 Press the side menu button on the home screen. 2 3 Press My Account. Change your name, email address, password, or access. Follow the steps in the app to complete.
Manage messages Use the app to view and manage messages about motion or sound detected by your camera. 1 Press the side menu button on the home screen. 2 3 4 5 Press Messages. The messages are displayed. Press a message to read it. Press the back arrow to go back to the list of messages.
Frequently Asked Questions What kind of maintenance does my security camera need? Your camera requires no maintenance. What should I do if I get a message that the security camera is unavailable? 1. Check that the security camera is connected to power. 2. Check for any notification from Honeywell sent via email about scheduled maintenance. 3. Check that your home Wi-Fi network is working, and the camera LED is solid green. 4.
Can I modify the frames per second for smaller file sizes? No. The camera adjusts this automatically. The default rate is 30 frames per second. Can I connect the security camera to a computer to download recorded clips? No. Clips are accessible only through the app. Clips can be downloaded and saved to your mobile device, but you need to do so before the clips are deleted based on your storage tier of 1, 7, or 30 days.
What if I get too many motion or audio event notifications? Try setting up detection zones, and create exclusion zones by setting sensitivity as Off or Low. See “Set up detection zones” on page 20. You can also change the motion or sound sensitivity settings to Off or Low (see “Motion detection” on page 15 and “Sound detection” on page 16) How close must the security camera be to my internet router? The range of distance of the Wi-Fi signal is determined by your router.
Specifications Dimensions (W x H x D): 2.5 x 4.4 x 1.8 in. (6.3 x 11.2 x 4.6 cm) Weight Camera & Base: 4 oz. (113 g) Weight Camera Alone: 3oz. (85 g) Video Resolution: 720p HD @ 30 fps Video Resolution: 1 MP JPEG Video Compression: MPEG-4 (H.264) Field of View: 135° / 5x Digital Zoom Wi-Fi Connectivity: IEEE 802.11 b, g, n; Single Band 2.4 GHz Minimum Bandwidth: 1.333 Mbps Power Supply: 5V / 2A AC Operating Temp.
FCC Regulations § 15.19 (a)(3) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. § 15.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. IC Regulations This device complies with Industry Canada license-exempt RSSs.
Lyric™ C1 Wi-Fi Security Camera Home and Building Technologies Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 YourHome.Honeywell.com ® U.S. Registered Trademark © 2017 Honeywell International Inc. 33-00267—01 M.S. 05-17 Printed in U.S.A.