Use and Care Manual

Hardware inside

Before You Start

Read each step carefully before starting. It is very important to ensure each step followed in

correct order, otherwise assembly difficulties may occur.

Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all

parts are included.

Work in a spacious area, preferably on a carpet close to where the unit will be used.

Keep the handtools close at hand. Do not use power tools to assemble your furniture.

They may scratch or damage the parts.

A x 8

Ø1/4"(6,3 mm) x 40 mm

C x 8

Ø1/4"(6,3 mm)

E x 1

Ø3,5 mm x 20 mm

B x 8

Ø1/4"(6,3 mm)

D x 3

Ø3 mm x 14 mm

F x 1

Ø1/4"(6,3 mm) x 28 mm

WALL

/WAND

/MUR

/PARED

/MURO

PAGE 1
Ax8 Ø1/4"(6,3 mm) x 40 mm Bx8 Ø1/4"(6,3 mm) Cx8 Ø1/4"(6,3 mm) Dx3 Ø3 mm x 14 mm Ex1 Ø3,5 mm x 20 mm Fx1 Ø1/4"(6,3 mm) x 28 mm Before You Start Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur. Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included. Work in a spacious area, preferably on a carpet close to where the unit will be used.