Personal Audio Enhancer PAE-200 User Manual English VitaSound TV™
PAE-200 TV In the Box 1 6 PAE-200 TV handset Analog (RCA) AV cable 2 7 PAE-200 TV Base unit Transmitter Headset case 3 Headset 4 AC/DC USB adaptor 5V 1A 8 Hanging Neck strap 9 Ear tips (large/regular/small) 5 USB cable
Contents Introduction 1 Reset PAE-200 Handset 9 Safety and Operation Instruction 1 Handset and Base Unit auto-connection 10 PAE-200 Handset Identifying Parts 2 Color Pairing 11 PAE-200 Base Unit Indentifying Parts 3 FAQ 12-13 Getting Started 4 Technical Specification 14 Base Unit Installation and Operation 5-6 Application 15 Handset Charging 6 Other Optional Accessories 16 Certification and Compliance 17 PAE-200 Handset Operation Power On 7 Adjust Volume 7 Select Volume Boo
1 2 PAE-200 Handset Indentifying Parts 3 Top 6 8 4 7 9 5 Left Front 10 1 Headset port (connect to headset) 2 Hook for neck strap 3 Power button 4 EQ mode button 5 EQ mode indicator (1-4) 6 Power indicator 7 Volume level indicator 8 Volume booster switch 9 Volume adjust buttons 10 Reset button 11 Charging port for Base Unit Right 11 Bottom 2
PAE-200 Base Unit Indentifying Parts OPTICAL L R COAXIAL OPTICAL COAXIAL DIGITAL AUDIO IN 14 15 18 19 16 17 12 12 Power indicator 13 Power button (transmitting) 14 Charging dock for PAE Handset 15 Analog (RCA) audio-in port 16 Audio input mode switch (Optical/Coaxial) 17 Optical audio-in port 18 Coaxial audio-in port 19 USB power adaptor port 13 3
Getting Started 15 of the Base Unit to the RCA audio-out port of the TV box 19 1. Connect the RCA audio cable from the Analog audio-in port 2. Connect the USB power adaptor to the Base Unit power port 3. Put the Handset to the Base unit charging dock 4. After charging, put on the neck strap 5. Plug the headset to the headset port 6. Power on the TV and the TV box 7. Press the power button 8. Press the power button 9. When the Handset connects to the Base unit, the power indicator 10.
Base Unit Installation and Operation Installation of Base Unit to TV 1. Connect the Base Unit with one end of the analog (RCA) audio cable Analog (RCA) audio cable HD TV TV box OPTICAL L R COAXIAL OPTICAL COAXIAL DIGITAL AUDIO IN Red connector to Red port, White connector to white port 2.
Base Unit Power ON/OFF and Indicator 1. Press the power button until the Red power indicator is ON 2. It is ready to connect to the Handset when the red light is ON 3. Press and hold the power button until the power indicator is OFF 1 Press 2 3 2 3 Press and Hold Charging PAE Handset 1. Put the Handset into the Base Unit charging dock No need to turn on the Base Unit and Handset during battery charging 2. The power indicator of the Handset will turn on during battery charging 3.
Power on the Handset Press and hold Press and hold the power button until the Red power indicator is on and flashing. It will search and connect to the Base Unit automatically. The indicator will stop flashing and turn to green color when the Handset is paired to the Base Unit. Adjust Volume Press and release Press and release the Volume adjust button button to increase the volume level. button to lower the volume level.
Select EQ Sound Mode EQ mode indicator The PAE-200 is equipped with 4 different EQ sound modes. User can select the sound mode according to the personal preferences EQ mode button EQ mode 1 : overall optimized EQ mode 2 : Low frequency boost EQ mode 3 : Medium frequency boost EQ mode 4 : High frequency boost The corresponding indicator will be lit up after sound mode is selected.
Reset the PAE-200 When the PAE-200 cannot be operated in any situation, press the rest button by a small pin object to reset the PAE-200 Handset. Reset button Headset To achieve the best sound performance, please use the headset provided by VitaSound. After uses, please unplug the headset from the PAE and put it into the headset case. Ear tips Pairs of large, regular & small ear tips are also provided. User can choose the one to fit.
Auto-connection between PAE-200 and Base Unit blue trademark If the Handset color of the PAE-200 TV and the “VitaSound” trademark color on the Base Unit Transmitter are the same, they will be connected automatically within a range of 10 meters. No pairing progress is required. Auto-conn ection 10 meters blue color If two Base Units are installed within 5 meters, transmitting signal will be interfered. Power off either one of them according usage situation to prevent signal interference.
Color Pairing and Connection If the Handset color of PAE-200 and the “VitaSound” trademark color on the Base Unit are not matched, the Handset and Base Unit will not be paired. Please be aware of the PAE-200 Handset color and the “VitaSound” trademark color of the Base Unit before use.
Frequently Asked Questions Symptom Possible Cause The PAE-200 Handset is not working The PAE-200 Handset is off. The PAE-200 Handset is out of battery The PAE-200 Handset is hang off. All indicators of the PAE-200 Handset turn off themselves, except the power indicator. The behavior is normal. The indicators will be off automatically for power saving when no operation is performed for 40 seconds. The Handset battery is running low. The Base Unit is power off.
Symptom Possible Cause No sound is produced from the headset while the Red indicator of the PAE-200 Handset is solid No audio signal from the Base Unit or TV on and the wireless connection is normal. The PAE-200 Handset and the Base Unit are out of Auto-connection between the the 10 meters operation range. PAE-200 Handset and the Base The auto-connection dose NOT work when the Unit is not working PAE-200 Handset color and the “VitaSound” trademark color on the Base Unit are different.
Technical specification PAE-200 TV Handset Dimensions: Weight: Battery: Operation time: Charging time: Headset Socket: Output signal frequency range: EQ sound mode: Volume control: Output power: Digital signal processing: 100.2mm x 60mm x 19.1mm 88 gram Built-in rechargeable lithium-ion, 2000 mAh 6 – 8 hours (fully charged) 4 – 5 hours 3.5mm stereo jack plug 200 – 16,000 Hz 4 modes 8 steps (4dB/step) 60 mW (16Ω load) 32 kHz sampling frequency 16 bit resolution in stereo Radio communication frequency: 2.
Smart phone Wall plug power adaptor MP3 player Laptop/PC Tablet USB cable Power adaptor 3.
Optional Accessories Leather Case Neck Strap Clip Case Belt Clip Case Optical Cable Coaxial Cable Over the Ears Headphone In Ear Headset T-coil Neck Loop Hanging Neck Strap Reset Pin 3.
FCC statement FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ----Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
www.vitasound.com info@vitasound.com 1-877-967-0742 PAE-200 Eng Version 1.