Use and Care Manual

ManualsBrandsHonda ManualsGas Snow Blowers28 in. Hydrostatic Wheel Drive Two-Stage Gas Snow Blower with Electric Start and Joystick Chute Control

QUICK FIND

CONTENTS

Add Fuel . . . . . . . . . . . . . . . . . . . . . . . . 5 Engine Oil Change . . . . . . . . . . . . . . . 16 Maintenance Schedule . . . . . . . . . . . . . . . . . . . 15

Check the Engine Oil Level . . . . . . . . . 5 Engine Oil Recommendations . . . . . . 16 Operating the Controls . . . . . . . . . . . . . . . . . . . . 7

Dealer Locator Information . . . . . . . . . 26 How to Contact Honda . . . . . . . . . . . . 26 Spark Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

FOR YOUR SAFETY . . . . . . . . . . . . . . 2 Features . . . . . . . . . . . . . . . . . . . . . . 10 STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

PARTS AND CONTROLS . . . . . . . . . . 3 Fuel Gauge . . . . . . . . . . . . . . . . . . 10 Storage Preparation. . . . . . . . . . . . . . . . . . . . 19

INITIAL SNOW BLOWER SETUP . . . . 4 LED Work Light. . . . . . . . . . . . . . . 10 Storage Precautions . . . . . . . . . . . . . . . . . . . 21

List of Parts . . . . . . . . . . . . . . . . . . . . 4 Snow Clearing Bar . . . . . . . . . . . . 10 Removal from Storage. . . . . . . . . . . . . . . . . . 21

Add Engine Oil. . . . . . . . . . . . . . . . . . 4 Auger-Lock Indicator. . . . . . . . . . . 10 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . 21

Please Register Your Snow Blower . . 4 Hour Meter . . . . . . . . . . . . . . . . . . 10 Engine Problems . . . . . . . . . . . . . . . . . . . . . . 21

Before Using Your Snow Blower . . . . 4 Starting the Engine . . . . . . . . . . . . . 10 Drive Problems . . . . . . . . . . . . . . . . . . . . . . . 21

BEFORE EACH OPERATION . . . . . . . 5 Stopping the Engine. . . . . . . . . . . . . 11 Snow Blower Problems . . . . . . . . . . . . . . . . . 22

Check Your Snow Blower . . . . . . . . . 5 Clearing Snow . . . . . . . . . . . . . . . . . 12 TECHNICAL INFORMATION . . . . . . . . . . . . . . 22

Check Your Work Area . . . . . . . . . . . 5 Snow-clearing Tips . . . . . . . . . . . . . 13 Serial Number Locations . . . . . . . . . . . . . . . . 22

Check the Engine Oil Level . . . . . . . . 5 Removing Obstructions . . . . . . . . . . 13 High Altitude Operation . . . . . . . . . . . . . . . . . 22

Add Fuel . . . . . . . . . . . . . . . . . . . . . . 5 SERVICING YOUR SNOW BLOWER 14 Emission Control System. . . . . . . . . . . . . . . . 23

OPERATION. . . . . . . . . . . . . . . . . . . . . 6 Maintenance Safety . . . . . . . . . . . . . 14 Air Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Snow Blower Safety. . . . . . . . . . . . . . 6 Maintenance Schedule . . . . . . . . . . 15 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . 24

Operating the Controls. . . . . . . . . . . . 7 Engine Oil Change. . . . . . . . . . . . . . 16 AVOIDING FUEL-RELATED PROBLEMS . . . . 25

Engine Switch . . . . . . . . . . . . . . . . . 7 Engine Oil Recommendations . . . . . 16 CUSTOMER INFORMATION . . . . . . . . . . . . . . 26

Auger-lock Indicator . . . . . . . . . . . . 7 Spark Plug . . . . . . . . . . . . . . . . . . . . 16 Parts, Accessories, and Service Items . . . . . 26

Hour Meter . . . . . . . . . . . . . . . . . . . 7 Track Adjustment. . . . . . . . . . . . . . . 17 Dealer Locator Information . . . . . . . . . . . . . . 26

Fuel Valve Lever . . . . . . . . . . . . . . . 8 Tire Inspection . . . . . . . . . . . . . . . . . 17 How to Contact Honda. . . . . . . . . . . . . . . . . . 26

Starter Grip . . . . . . . . . . . . . . . . . . . 8 Auger and Blower Inspection. . . . . . 17 Honda Publications . . . . . . . . . . . . . . . . . . . . 26

Throttle Lever . . . . . . . . . . . . . . . . . 8 Shear Bolt Replacement . . . . . . . . . 17 DISTRIBUTOR’S LIMITED WARRANTY . . . . . 27

Choke Knob . . . . . . . . . . . . . . . . . . 8 Skid Shoes and Scraper . . . . . . . . . 17 EMISSION SYSTEM WARRANTY. . . . . . . . . . 28

Shift Lever. . . . . . . . . . . . . . . . . . . . 8 TRANSPORTING . . . . . . . . . . . . . . . . 18 PRODUCT REGISTRATION . . . . . . . . . . . . . . 31

Chute Control Switch . . . . . . . . . . . 8 Before Loading . . . . . . . . . . . . . . . . 18

Drive Clutch Lever . . . . . . . . . . . . . 8 Loading . . . . . . . . . . . . . . . . . . . . . . 18

Auger Clutch Lever . . . . . . . . . . . . . 9

Steering Control Levers . . . . . . . . . 9

Height Adjusting Lever . . . . . . . . . . 9

QUESTIONS?

Contact your Honda dealer.

There is a dealer locator at

powerequipment.honda.com

00X31V45 A152

OWNER’S MANUAL

HSS928A • HSS1332A

SNOW BLOWER

Before operating the snow blower for the first time, please read this

Owner’s Manual. Even if you have operated other snow blowers,

take time to become familiar with how this snow blower operates and

practice in a safe place until you build up your skills.

Summary of content (32 pages)

PAGE 1
OWNER’S MANUAL HSS928A • HSS1332A SNOW BLOWER Before operating the snow blower for the first time, please read this Owner’s Manual. Even if you have operated other snow blowers, take time to become familiar with how this snow blower operates and practice in a safe place until you build up your skills. QUICK FIND Add Fuel . . . . . . . . . . . . . . . . . . . . . . . . 5 Engine Oil Change . . . . . . . . . . . . . . . 16 Maintenance Schedule . . . . . . . . . . . . . . . . . . .
PAGE 2
Important Message to Parents WELCOME Congratulations on your selection of a Honda snow blower! We are certain you will be pleased with your purchase of one of the finest snow blowers on the market. We want to help you get the best results from your new snow blower and to operate it safely. This manual contains the information on how to do that; please read it carefully.
PAGE 3
PARTS AND CONTROLS Track-Type Models Wheel-Type Models SHIFT LEVER THROTTLE LEVER CHUTE CONTROL SWITCH CHUTE GUIDE (double-articulating for HSS1332A electric-starter model only) SNOW DISCHARGE CHUTE FUEL TANK CAP LED WORK LIGHT CHUTE CONTROL SWITCH THROTTLE LEVER SHIFT LEVER FUEL TANK CAP CHUTE GUIDE SNOW DISCHARGE CHUTE FUEL VALVE LEVER SNOW CLEARING BAR ENGINE SERIAL NUMBER MUFFLER ENGINE OIL FILLER CAP AUGER AUGER TRACK DRIVE CLUTCH LEVER HEIGHT ADJUSTING LEVER ENGINE SWITCH DRIVE CLUTCH
PAGE 4
INITIAL SNOW BLOWER SETUP Add Engine Oil The snow blower is shipped WITHOUT OIL in the engine. List of Parts With help from an assistant, carefully remove the snow blower and loose parts from the carton and compare the loose parts against the following list. Contact the authorized Honda dealer from whom you purchased the snow blower if any of the loose parts shown are not included with your snow blower. Ref No. Description Qty.
PAGE 5
BEFORE EACH OPERATION Your safety is your responsibility. A little time spent in preparation will significantly reduce your risk of injury. Read and understand this manual. Know what the controls do and how to operate them. Familiarize yourself with the snow blower and its operation before you begin using it. Know how to quickly shut off the snow blower in case of an emergency.
PAGE 6
Never use stale or contaminated gasoline or an oil and gasoline mixture. Avoid getting dirt or water in the fuel tank.  WARNING Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel.
PAGE 7
Adjust the snow discharge chute to avoid hitting the operator, bystanders, windows, and other objects with ejected snow. Stay clear of the snow discharge chute while the engine is running. Children and pets must be kept away from the area of operation to avoid injury from flying debris and contact with the snow blower. Refuel with Care Operating the Controls Engine Switch Gasoline is extremely flammable, and gasoline vapor can explode. Allow the engine to cool if the snow blower has been in operation.
PAGE 8
Fuel Valve Lever FUEL VALVE LEVER FORWARD The fuel valve opens and closes the fuel line leading from the fuel tank to the carburetor. Make sure that the fuel valve lever is positioned exactly at either the ON or OFF position. When the snow blower is not in use, always leave the fuel valve lever in the OFF position to reduce the possibility of fuel leakage.
PAGE 9
Auger Clutch Lever Depress the auger clutch lever to start the snow blowing mechanism. If the drive clutch lever is engaged, the auger clutch lever will lock engaged when it is depressed. However, the auger clutch lever will unlock when the drive clutch lever is released. DISENGAGED AUGER CLUTCH LEVER AUGER CLUTCH DISENGAGE Pull both steering control levers at the same time to momentarily disengage the transmission.
PAGE 10
Features Fuel Gauge FUEL GAUGE The fuel gauge indicates the amount of fuel in the tank. When the fuel gauge needle enters the EMPTY position, refill the tank as soon as possible. LED Work Light Make sure that all rotating parts are stopped completely before removing a foreign object. FULL Hour Meter (HSS1332A Electric-starter model) EMPTY The hour meter shows the accumulated engine running time of the snow blower. Use it as a guide for inspection or maintenance.
PAGE 11
3. In cold weather or when the engine is cold, move the choke knob to the CLOSED position and move the throttle lever to the FAST position. FAST 6. While warming the engine up, also warm the transmission as follows: a. Check that the shift lever is in the “N” (Neutral) position. 4. Start the engine.
PAGE 12
3. Move the throttle lever to the SLOW position. SLOW 2. Check that the auger clutch lever is released and move the shift lever to select the desired drive speed. FAST N (NEUTRAL) R (REVERSE) FAST Slower ground speed is recommended for removing deep or hard-packed snow. THROTTLE LEVER OFF F (FORWARD) SLOW FAST Faster ground speed is recommended for removing heavy or wet snow. 4. Turn the engine switch to the OFF position. SLOW SHIFT LEVER 3.
PAGE 13
Snow-clearing Tips For best efficiency, clear snow before it hardens and turns to ice. Do not reduce engine speed while clearing snow. Operating tips for clearing hard or deep snow: • Reduce forward speed. If this is not sufficient, use the shift lever to clear snow with a back and forth motion. • Clear a narrower swath. Make several passes with the auger overlapping the cleared areas.
PAGE 14
SERVICING YOUR SNOW BLOWER Proper maintenance is essential for safe, economical, and trouble-free operation. It will also help reduce air pollution. To help you properly care for your snow blower, the following pages include a maintenance schedule, routine inspection procedures, and simple maintenance procedures using basic hand tools.
PAGE 15
Maintenance Schedule Every year REGULAR SERVICE PERIOD (1) Perform at every indicated month or operating hour interval, whichever comes first.
PAGE 16
Engine Oil Change Engine Oil Recommendations Drain the oil while the engine is still warm to ensure rapid and complete draining. Oil is a major factor affecting performance and service life. Use a 4-stroke automotive detergent oil. 1. Place the snow blower on a level surface. SAE 5W-30 is recommended for general use. 2. Place a suitable container below the engine (right side) to catch the used oil, then remove the oil filler cap and the drain plug.
PAGE 17
Track Adjustment 2. Turn the engine switch to the OFF position, and remove the cap from the spark plug. Make sure the tracks are clean and dry before adjustment. The tracks cannot be correctly adjusted if clogged with snow or debris, or coated with ice. 3. Clean the auger and blower of snow, ice, or any other foreign particles. With the snow blower resting on its tracks, check track deflection by pressing down midway between the wheels with a force of 11 lbf (49 N). 5. Replace any broken shear bolts.
PAGE 18
Auger clearance: Ordinary snow conditions Smooth, ice-covered surfaces Rough or uneven surfaces 5/32 – 5/16 in (4.0 – 8.0 mm) 0 – 3/16 in (0 – 5.0 mm) 1 – 1-3/16 in (25.0 – 30.0 mm) 4. If the truck bed has a low roof or cover with less than 5 ft (1.5 m) of headroom, lower the discharge deflector for better clearance or remove the discharge chute assembly. 5. Ensure there is sufficient fuel in the tank. The engine may stall on the ramp if there is not enough fuel in the tank. Loading NOTICE 1.
PAGE 19
The Distributor’s Limited Warranty does not cover fuel system damage or engine performance problems resulting from neglected storage preparation. STORAGE Storage Preparation Proper storage preparation is essential for keeping your snow blower trouble-free and looking good. The following steps will help to keep rust and corrosion from impairing your snow blower’s function and appearance, and will make the engine easier to start when you use the snow blower again.
PAGE 20
4. After draining, tighten the drain knob and turn the fuel valve to the OFF position. 5. Remove the fuel sediment cup. Do not remove the O-ring. Confirm the O-ring is properly positioned and in good condition. Contact your authorized Honda dealer if the O-ring needs to be replaced. 2. Remove the negative (–) cable from the battery negative (–) terminal and then remove the positive (+) cable from the battery positive (+) terminal.
PAGE 21
Fuse Replacement Rotate the fuse holder cover and pull the fuse out. If blown, replace with a fuse of the same type and rating. HSS1332A (electric start) HSS928A (electric start) TROUBLESHOOTING Engine Problems Starter operates, but engine will not start Possible cause Correction Throttle not in the proper position. Throttle must be in the FAST position. Choke not in the proper position Choke should be in the OFF position for a hot start. Choke should be in the ON position for a cold start.
PAGE 22
Snow Blower Problems Won’t blow snow Possible cause Correction Auger clutch lever is in the DISENGAGED position. Move lever to the ENGAGED position (see page 8). Shear bolt(s) broken. Replace broken shear bolt(s) (see page 17). Discharge chute restricted. Foreign object stopping the auger from rotating. Clear the discharge chute of obstructions (see page 10). Remove the foreign object. Belt worn, not on the pulleys or not properly installed. See servicing Honda snow blower dealer.
PAGE 23
Emission Control System Source of Emissions The combustion process produces carbon monoxide, oxides of nitrogen, and hydrocarbons. Control of hydrocarbons and oxides of nitrogen is very important because, under certain conditions, they react to form photochemical smog when subjected to sunlight. Carbon monoxide does not react in the same way, but it is toxic.
PAGE 24
Specifications Frame Frame HSS928A Track/ Elec. Start Track Description code 28.9 in (735 mm) Dry weight [mass] 30.5 (775 mm) 43.5 in (1,105 mm) 37.0 in (940 mm) 265 lb (120 kg) 276 lb (125 kg) 36.6 in (930 mm) 231 lb (105 kg) Width of snow clearance 28.0 in (710 mm) Height of snow clearance 21.7 in (550 mm) Snow throwing distance (varies with snow conditions) Max. 52 ft (16 m) Clearing capacity Track 243 lb (110 kg) Overall length Overall height SAFA 58.5 in (1,485 mm) 32.
PAGE 25
AVOIDING FUEL-RELATED PROBLEMS When properly maintained, your Honda powered product should provide years of trouble-free operation. This includes the fuel system. However, gasoline can quickly deteriorate (in as little as 30 days) causing starting or running problems and, in some cases, damage to the fuel system. Most fuel-related problems can be avoided by following the precautions listed below.
PAGE 26
CUSTOMER INFORMATION Parts, Accessories, and Service Items Contact an authorized Honda servicing dealer to purchase any of these (or other) Honda Genuine items for your snow blower. Replacement Parts Item Spark plug Part Number Notes 98079-55846 NGK - BPR5ES Shear bolt 90121-V45-A00 90119-V45-A00 Blower 6 x 18 bolt (carriage-type) Auger 6 x 18 bolt Fuse 98200-40500 5 Amp (electric-starter models only) Part Number Cover See your local dealer. NO-SPILL® fuel can See your local dealer.
PAGE 27
DISTRIBUTOR’S LIMITED WARRANTY This warranty is limited to the following Honda Power Equipment products when distributed by American Honda Motor Co., Inc., Power Equipment Division, 4900 Marconi Drive, Alpharetta, Georgia 30005. The following warranty applies to products purchased at retail or placed in rental service on or after January 1, 2010.
PAGE 28
EMISSION SYSTEM WARRANTY Your new Honda Power Equipment engine complies with the U.S. EPA and State of California (models certified for sale in California only) emission regulations. American Honda Motor Co., Inc. provides the emission warranty coverage for engines in the United States and its territories. In the remainder of this Emission Control System Warranty, American Honda Motor Co., Inc., will be referred to as Honda.
PAGE 29
NOTES 29
PAGE 30
NOTES 30
PAGE 31
PRODUCT REGISTRATION Thank you for choosing Honda! Please register your snow blower within 30 days of purchase to ensure you receive important service information in the event of a product update or recall and for added coverage during certain sales promotions. Your information will remain confidential. It will not be released to any other company or organization.
PAGE 32
1. Go to: powerequipment.honda.com to register your unit. 2. Click on Product Registration. 3. Complete the required information and click Submit. It’s that simple! NO POSTAGE NECESSARY IF MAILED IN THE UNITED STATES Product Registration BUSINESS REPLY MAIL FIRST-CLASS MAIL PERMIT NO. 117 ALPHARETTA GA POSTAGE WILL BE PAID BY ADDRESSEE Power Equipment Division American Honda Motor Co., Inc. 4900 Marconi Dr. Alpharetta GA 30005-9956 EM5 HPE.2019.01 PRINTED IN U.S.A.