WFU032 IEEE 802.11 b/g/n 2x2 Module Product Specification 2.
WFU032 PRODUCT SPECIFICATION Revision History Date Number Approver Comments June 16, 2016 1.0 Hans Huang Initial Draft July 18, 2016 2.0 Hans Huang (1) (2) (3) (4) (5) Update Tx Power Consumption Update Tx Power Update Label Specification Update EEPROM information Update Module Photo Nov 10,2016 2.1 Hans Huang (1) Add connector drawing (2) Add power on sequence (3) Add certification Nov 14,2016 2.2 Hans Huang Update Power Consumption Mar 08,2017 2.
WFU032 PRODUCT SPECIFICATION TABLE OF CONTENTS Revision History .................................................................................................. 1 Chapter 1. Module Overview ............................................................................. 4 1-1 Key Characteristic ......................................................................................................................... 4 1-2 Certification...........................................................................
WFU032 PRODUCT SPECIFICATION Figures: Figure 1 Connector Drawing ..........................................................................................................................................6 Figure 2 Power on sequence .........................................................................................................................................7 Figure 3 Mechanical Drawing ................................................................................................................
WFU032 PRODUCT SPECIFICATION CHAPTER 1. MODULE OVERVIEW The Foxconn WFU032 WLAN module contains the MTK® MT7603U single-chip which is a highly integrated Wi-Fi single chip which supports 300 Mbps PHY rate. It fully complies with IEEE 802.11n and IEEE 802.11 b/g standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.
WFU032 PRODUCT SPECIFICATION 1-3 USB Pin Definition Table 1 Pin Definitions Pin# 1 2 3 4 5 Name 6 WOW RST Vcc DD+ GND Description Reset pin, active low. +5V Power Supply USB Data DUSB Data D+ GND Wake on WLAN. Default active low to wake-up the system. (If not used, please floating it.) Vendor: Jiangsu Lezhi Electronics CO.,LTD (江蘇樂智電子科技有限公司) PN: LZE 12500-06AWB FOXCONN CONFIDENTIAL 5 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co.
WFU032 PRODUCT SPECIFICATION Figure 1 Connector Drawing FOXCONN CONFIDENTIAL 6 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd.
WFU032 PRODUCT SPECIFICATION CHAPTER 2. 2-1 ELECTRICAL AND RF SPECIFICAITON Recommended Operation Rating Table 2 Operation Rating Parameter Min Typ. Max. Unit Vcc 4.5 5 5.5 V RST (Active Low) 2.97 3.3 3.63 V WOW 2.97 3.3 3.63 V 5.5 V VDP / VDM 0 RF Interface 50 Ohm Note: WoW is an output pin for wake up host and can be set active high or low by MT7603U WiFi driver. If you don’t use the WoW function, keep floating in hardware design.
WFU032 PRODUCT SPECIFICATION 2-3 Power Consumption Power consumption is measured using current probe loop on the Power rails of the USB interface (Pins).
WFU032 PRODUCT SPECIFICATION 2-5 WiFi RF Specification – RX Table 5 IEEE 802.11 b/g/n RX Sensitivity (WLAN0&WLAN1) Data Rate Modulation (Mbps) 1 2 5.5 11 6 9 12 18 24 36 48 54 DBPSK DQPSK CCK CCK OFDM OFDM OFDM OFDM OFDM OFDM OFDM OFDM Rx Sensitivity (dBm) Max. -83 -80 -83 -80 -85 -84 -82 -80 -77 -73 -69 -68 Typ. -94 -93 -91 -88 -90 -88 -87 -86 -83 -80 -77 -75 Data Rate (Mbps) Modulation Rx Sensitivity (dBm) HT20-7.22 HT20-14.44 HT20-21.67 HT20-28.89 HT20-43.33 HT20-57.78 HT20-65 HT20-72.
WFU032 PRODUCT SPECIFICATION CHAPTER 3. 3-1 MECHANICAL SPECIFICATION Module Assembly Dimension Figure 3 Mechanical Drawing FOXCONN CONFIDENTIAL 10 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd.
WFU032 PRODUCT SPECIFICATION 3-2 Label Specification Figure 4 Label Drawing FOXCONN CONFIDENTIAL 11 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd.
WFU032 PRODUCT SPECIFICATION CHAPTER 4.
WFU032 PRODUCT SPECIFICATION Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
WFU032 PRODUCT SPECIFICATION End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: RX3-WFU032”. The grantee's FCC ID can be used only when all FCC compliance requirements are met.
WFU032 PRODUCT SPECIFICATION Canada, Industry Canada (IC) Statement This Class B digital apparatus complies with Canadian ICES-003. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
WFU032 PRODUCT SPECIFICATION Canada, Industrie Canada (IC ) Déclaration Cet appareil numérique de classe B est conforme à la norme NMB-003. Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence.
