WBU063-VZ WBU063-VZ 802.11a/b/g/n/ac WLAN 2T2R + BT v5.1 Combo Module Product Specification 3.
WBU063-VZ Revision History Date Number Approver Comments 2021/09/08 1.0 Cathy Kuo Initial Released 2021/09/08 2.0 Cathy Kuo Modified Page 12 BLE RF Power 2021/09/15 3.0 Cathy Kuo Updated page 18~22 Regulatory statement RESTRICTED AND CONFIDENTIAL INFORMATION STATEMENT All information contained in this document is the exclusive property of Foxconn Technology Inc. and its development partners.
WBU063-VZ CHAPTER1: MODULE OVERVIEW The Foxconn WBU063-VZ is a highly integrated module which features a low power 2x2 11a/b/g/n/ac dual-band Wi-Fi subsystem and a Bluetooth subsystem. The Wi-Fi subsystem contains the 802.11a/b/g/n/ac radio, baseband, and MAC that are designed to meet both the low power and high throughput application. WBU063-VZ has a 32-bit RISC MCU that handles Wi-Fi and Bluetooth tasks. The Bluetooth subsystem contains the Bluetooth radio, baseband, link controller.
WBU063-VZ 1-3 Pin Definition 12……10 Figure 1 Pin Definitions (Module Top View) Table 1 Pin Definitions Pin number Symbol name Type Pin description 1 VBUS Power DC 5V 2 VBUS Power DC 5V 3 WoBLE I/O BT_wake on 4 GND GND Ground 5 GND GND Ground 6 DM I/O USB data - 7 DP I/O USB data + 8 GND GND Ground 9 WoW I/O Wi-Fi_wake on 10 Rst_N I/O reset 3
WBU063-VZ CHAPTER2: ELECTRICAL AND RF SPECIFICAITON 2-1 Recommended Operation Rating Table 2 Operation Rating VDD RF Interface Condition Min Typ. Max. Unit 5 Zo 4.5 5 50 5.
WBU063-VZ 2-3 WiFi RF Specification – TX Table 4 IEEE 802.11 b/g/n TX Average Maximum Output Power Band@2.4GHz 802.11b 802.11g 802.11n-HT20 802.11n-HT40 Data Rate(Mbps) 1 2 5.5 11 6 9 12 18 24 36 48 54 MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 Modulation DBPSK DQPSK CCK CCK OFDM OFDM OFDM OFDM OFDM OFDM OFDM OFDM BPSK BPSK QPSK QPSK 16-QAM 16-QAM 64-QAM 64-QAM BPSK QPSK QPSK 16-QAM 16-QAM 64-QAM 64-QAM 64-QAM 5 WLAN 0[dBm] WLAN 1[dBm] WLAN 0+1[dBm] 13.5 13.
WBU063-VZ Table 5 IEEE 802.11 a/n/ac TX Average Maximum Output Power Band@5GHz 802.11a 802.11n-HT20 802.11ac-VHT20 802.11n-HT40 802.11ac-VHT40 802.
WBU063-VZ 2-4 WiFi RF Specification – RX Table 6 IEEE 802.11 b/g/n RX Sensitivity (WLAN0&WLAN1) Data Rate (Mbps) Rx Sensitivity (dBm) Modulation Data Rate (Mbps) Typ. Rx Sensitivity (dBm) Modulation Typ. 1 DBPSK -98 HT20-MCS0 BPSK -94.5 2 DQPSK -95.5 HT20-MCS1 QPSK -91.5 5.5 CCK -93.5 HT20-MCS2 QPSK -88.5 11 CCK -90.5 HT20-MCS3 16-QAM -86 6 OFDM -95.5 HT20-MCS4 16-QAM -82.5 9 OFDM -93 HT20-MCS5 64-QAM -78.5 12 OFDM -92.5 HT20-MCS6 64-QAM -76.
WBU063-VZ Table 7 IEEE 802.11 a/n/ac RX Sensitivity (WLAN0&WLAN1) Data Rate (Mbps) Rx Sensitivity (dBm) Modulation Rx Data Rate (Mbps) Modulation Sensitivity (dBm) Typ. Typ. 6 OFDM -94 HT40-MCS0 BPSK -90 9 OFDM -91 HT40-MCS1 QPSK -86.5 12 OFDM -91 HT40-MCS2 QPSK -84.5 18 OFDM -88 HT40-MCS3 16-QAM -81.5 24 OFDM -85 HT40-MCS4 16-QAM -77.5 36 OFDM -82 HT40-MCS5 64-QAM -73.5 48 OFDM -77.5 HT40-MCS6 64-QAM -72.
WBU063-VZ 2-5 Bluetooth RF Specification Parameter Condition Basic Data Rate – Transmit Performance RF Transmit Power (TRM01) Power Density (TRM02) Per 100kHz Power Control (TRM03) TX Output Spectrum – F(low)- CH0 Freq. Range (TRM04) F(high)-CH78 TX Output Spectrum – 20dB BW (TRM05) TX Output Spectrum – ∣f-f0∣= 2MHz Adjacent Channel Power (TRM06) ∣f-f0∣≥ 3MHz TX Output Spectrum – 30MHz – 1GHz Out of Band Spurious Emission 1GHz -12.75GHz 5.15GHz -5.35GHz 5.725GHz-5.
WBU063-VZ ∣f-f0∣= 1MHz ∣f-f0∣= 2MHz ∣f-f0∣≥ 3MHz TX Output Spectrum – 30MHz – 1GHz Out of Band Spurious Emission 1GHz -12.75GHz 5.15GHz -5.35GHz 5.725GHz-5.825GHz Enhanced power control (TRM14) Step Size Difference. Btw. GFSK, π/4 DQPSK,&8DPSK Basic Data Rate – Receiver Performance Sensitivity at 0.
WBU063-VZ Enhanced Data Rate – Receiver Performance Sensitivity at 0.1% BER (RCV07) π/4 DQPSK 8DPSK EDR BER Floor Performance at ≤ 0.
WBU063-VZ 2-6 Bluetooth Low Energy RF Specification Parameter Transmit Performance RF Transmit Power (TRM-LE01,02) In-Band Emission (TRM-LE03,04) TX Output Spectrum – Out of Band Spurious Emission Modulation Characteristic (TRMLE05) Condition Min. Typ. Max. 8 9 ≤ -20 ≤ -30 ≤ -36 ≤ -30 ≤ -47 ≤ -47 225 ≤ ∆f1avg≤ 275 ≥ 185 at 99.9% ≥ 0.8 dBm dBm ≤± 150 ≤± 50 20 Hz/50 us kHz ≤ -81 ≤ 21 dBm dB 7 ∣f-f0∣= 2MHz ∣f-f0∣≥ 3MHz 30MHz – 1GHz 1GHz -12.75GHz 5.15GHz -5.35GHz 5.725GHz-5.
WBU063-VZ 2-7 Environment Specifications Operating Conditions (preliminary) Operation Temperature : 0 ~ 60℃ Storage Conditions (preliminary) Non-Operation Temperature : -10 ~ 60℃ (Typ.
WBU063-VZ CHAPTER3: MECHANICAL SPECIFICATION 3-1 Module Assembly Dimension Figure 2 Mechanical Drawing 3-2 Label Specification Figure 3 Label Drawing 14
WBU063-VZ 3-3 Module Photo Figure 4 Module Photo(top) Figure 5 Module Photo(bottom) 15
WBU063-VZ CHAPTER4: WIRELESS MODULE INSTALLATION PROCEDURE 1, Prepare wireless module and open connector as red part 2, Prepare a FFC(Flexible Flat Cable) to connect with wireless module connector and press 3, Another FFC site to connect with host main board and press 4, Module connection BT antenna 16
WBU063-VZ CHAPTER5: REGULATORY STATEMENT FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
WBU063-VZ IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization. The module is tested for standalone mobile RF exposure use condition.
WBU063-VZ Part 15 Subpart B disclaimer This transmitter module is tested as a subsystem and its certification does not cover the FCC Part 15 Subpart B rule requirement applicable to the final host. The final host will still need to be reassessed for compliance to this portion of rule requirements if applicable. As long as all conditions above are met, further transmitter test will not be required.
WBU063-VZ ISED Statement: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de classe B est conforme à la norme canadienne ICES-003. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
WBU063-VZ IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization.
WBU063-VZ Antennas The following antennas have been certified for use with this module; antennas of the same type with equal or lower gain may also be used with this module. The antenna must be installed such that 20 cm can be maintained between the antenna and users. This radio transmitter [2878F-WBU063VZ] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated.