WBU034 IEEE 802.11 a/b/g/n/ac 2x2 + BT Combo Module Product Specification 2.
August 17, 2016 WBU034 PRODUCT SPECIFICATION Revision History Date Number Approver Comments July. 29, 2016 1.0 Ben Ho Initial Draft Aug. 17, 2016 2.0 Cathy Kuo Updated Module Top Side Photo RESTRICTED AND CONFIDENTIAL INFORMATION STATEMENT All information contained in this document is the exclusive property of Foxconn Technology Inc. and its development partners. Any reproduction or disclosure of all or part of this document without the expressed written consent of Foxconn Technology Inc.
WBU034 PRODUCT SPECIFICATION August 17, 2016 TABLE OF CONTENTS Revision History .................................................................................................. 1 Table of Contents................................................................................................ 2 Chapter 1. Module Overview ............................................................................. 4 1-1 Key Characteristic ...................................................................................
WBU034 PRODUCT SPECIFICATION August 17, 2016 Figures: Figure 1 Pin Definitions (Module Top View) ..................................................................................................................5 Figure 2 Mechanical Drawing ......................................................................................................................................15 Figure 3 Label Drawing(TOP) ........................................................................................................
August 17, 2016 WBU034 PRODUCT SPECIFICATION CHAPTER 1. MODULE OVERVIEW The Foxconn WBU034 is a highly integrated module which has built in a 2x2 dual-band wireless LAN radio and Bluetooth radio. It supports IEEE 802.11a/b/g/n/ac standard and provides the highest PHY rate up to 867Mbps, offering feature-rich wireless connectivity and reliable throughput from an extended distance. It includes Bluetooth EDR and LE radio which complies with Bluetooth v2.1+EDR, v3.0, andv4.0+BLE.
August 17, 2016 WBU034 PRODUCT SPECIFICATION 1-3 Pin Definition 12 1 Figure 1 Pin Definitions (Module Top View) Table 1 Pin Definitions FOXCONN CONFIDENTIAL 5 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd.
August 17, 2016 WBU034 PRODUCT SPECIFICATION CHAPTER 2. 2-1 ELECTRICAL AND RF SPECIFICAITON Recommended Operation Rating Table 2 Operation Rating Parameter VDD3_3 RF Interface 2-2 Condition 3.3V Zo Min 3.0V Typ. 3.3V 50 Max. 3.6V Unit V Ohm Power Consumption Power consumption is measured using current probe loop on the Power rails of the USB interface (Pins).
August 17, 2016 WBU034 PRODUCT SPECIFICATION 2-3 WiFi RF Specification – TX Table 4 IEEE 802.11 b/g/n/ac TX Output Power (WLAN0&WLAN1) Data Rate (Mbps) Modulation Tx Typical Power (dBm) Data Rate (Mbps) Modulation Tx Typical Power (dBm) 1 2 5.
August 17, 2016 WBU034 PRODUCT SPECIFICATION Table 5 IEEE 802.
August 17, 2016 WBU034 PRODUCT SPECIFICATION 2-4 WiFi RF Specification – RX Table 6 IEEE 802.11 b/g/n RX Sensitivity (WLAN0&WLAN1) Data Rate Modulation (Mbps) 1 2 5.5 11 6 9 12 18 24 36 48 54 DBPSK DQPSK CCK CCK OFDM OFDM OFDM OFDM OFDM OFDM OFDM OFDM Rx Sensitivity (dBm) Max. -83 -80 -79 -76 -85 -84 -82 -80 -77 -73 -69 -68 Typ. -94 -91 -90 -87 -91 -90 -88 -86 -83 -79 -75 -74 Data Rate (Mbps) Modulation Rx Sensitivity (dBm) HT20-7.22 HT20-14.44 HT20-21.67 HT20-28.89 HT20-43.33 HT20-57.
August 17, 2016 WBU034 PRODUCT SPECIFICATION Table 7 IEEE 802.11 a/n/ac RX Sensitivity (WLAN0&WLAN1)) Data Rate Modulation (Mbps) 6 9 12 18 24 36 48 54 OFDM OFDM OFDM OFDM OFDM OFDM OFDM OFDM Rx Sensitivity (dBm) Max. -85 -84 -82 -80 -77 -73 -69 -68 Typ. -89 -88 -86 -84 -81 -77 -73 -72 Data Rate (Mbps) Modulation Rx Sensitivity (dBm) HT20-7.22 HT20-14.44 HT20-21.67 HT20-28.89 HT20-43.33 HT20-57.78 HT20-65 HT20-72.
August 17, 2016 WBU034 PRODUCT SPECIFICATION 2-5 Bluetooth RF Specification Parameter Basic Data Rate – Transmit Performance RF Transmit Power (TRM01) Power Density (TRM02) Power Control (TRM03) TX Output Spectrum – Freq. Range (TRM04) TX Output Spectrum – 20dB BW (TRM05) TX Output Spectrum – Adjacent Channel Power (TRM06) TX Output Spectrum – Out of Band Spurious Emission Condition Min. -6 Per 100kHz F(low)- CH0 F(high)-CH78 ∣f-f0∣= 2MHz ∣f-f0∣≥ 3MHz 30MHz – 1GHz 1GHz -12.75GHz 5.15GHz -5.35GHz 5.
August 17, 2016 WBU034 PRODUCT SPECIFICATION Enhanced power control (TRM14) 5.15GHz -5.35GHz 5.725GHz-5.825GHz Step Size Difference. Btw. GFSK, π/4 DQPSK,&8DPSK Basic Data Rate – Receiver Performance Sensitivity at 0.
August 17, 2016 WBU034 PRODUCT SPECIFICATION 2-6 Bluetooth Low Energy RF Specification Parameter Transmit Performance RF Transmit Power (TRM-LE01,02) In-Band Emission (TRM-LE03,04) TX Output Spectrum – Out of Band Spurious Emission Modulation Characteristic (TRM-LE05) Carrier Frequency Drift (TRM-LE06,07) Condition Min. -6 ∣ f-f0∣ = 2MHz ∣ f-f0∣ ≥ 3MHz 30MHz – 1GHz 1GHz -12.75GHz 5.15GHz -5.35GHz 5.725GHz-5.
August 17, 2016 WBU034 PRODUCT SPECIFICATION 2-7 Antenna Specification Requirements Nominal antenna port impedance specification is 50 ohms for the Foxconn WBU034 hardware. For regulatory requirements, it is assumed that the antenna gain is: For WLAN0 & WLAN1 (WiFi): WLAN0 Antenna gain for the 2.4GHz band : 1.68 dBi WLAN0 Antenna gain for the 5GHz band : 2.78 dBi WLAN1 Antenna gain for the 2.4GHz band : 3.36 dBi WLAN1 Antenna gain for the 5GHz band : 4.11 dBi For BT (Bluetooth): Antenna gain for the 2.
August 17, 2016 WBU034 PRODUCT SPECIFICATION CHAPTER 3. 3-1 MECHANICAL SPECIFICATION Module Assembly Dimension Figure 2 Mechanical Drawing FOXCONN CONFIDENTIAL 15 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd.
August 17, 2016 WBU034 PRODUCT SPECIFICATION 3-2 Label Specification Figure 3 Label Drawing (TOP) Figure 4 Label Drawing (BOTTON) FOXCONN CONFIDENTIAL 16 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd.
August 17, 2016 WBU034 PRODUCT SPECIFICATION CHAPTER 4. 4-1 ADDITIONAL INFORMATION EEPROM Information Table 8 USB PID/VID Setting (TBD) Type WiFi_If 4-2 Mode PID VID AC 9A50 04DD Module Photo Figure 5 Top Side Photo 4-3 Figure 6 Bottom Side Photo Environment Specifications Operating Conditions (preliminary) Operation Temperature : 0 ~ 60℃ Storage Conditions (preliminary) Non-Operation Temperature : -44 ~ 60℃ (Typ.
WBU034 PRODUCT SPECIFICATION August 17, 2016 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WBU034 PRODUCT SPECIFICATION August 17, 2016 End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: RX3-WBU034”. The grantee's FCC ID can be used only when all FCC compliance requirements are met.