COMPANY CONFIDENTIAL HON HAI PRECISION IND. CO., LTD. No.2, 2nd Dong Huan Road, 10th YouSong lndustrial District, Longhua Town, Baoan, ShenZhen Tel: +86-755-28128988#26265 Fax:+86-755-28129800#64886 Customer Name: SONY(US) Engineering Requirement Specification IEEE 802.11b/g/n WLAN and Bluetooth v3.0+HS Combo Card (Project Name) Marvell 88W8787 WLAN/BT Combo Card J20H045.00 NA (Foxconn Part No.) (Customer Part No.
COMPANY CONFIDENTIAL 0. REVISION HISTORY ........................................................................ 3 1. INTRODUCTION ........................................................................... 4 1.1 SCOPE ................................................................................... 4 1.2 FEATURE ................................................................................. 4 2. PRODUCT FUNCTIONAL SPECIFICATION.................................................... 5 3.
COMPANY CONFIDENTIAL 0. Revision History Date Document revision Product revision 2011/03/25 00 00S0 1. Initial release 2011/07/01 01 01S1 1. Change dual band to single band 2011/09/08 02 02S2 1.
COMPANY CONFIDENTIAL 1. Introduction Project Name: 88W8787 WiFi(11b/g/n)/BT combo Project Number: J20H045.00 This documentation describes the engineering requirements specification of 88W8787 (WLAN+BT) combo Card. It is a confidential document of Foxconn. 1.1 Scope The J20H045.00 combo design is based on the Marvell 8787 single-chip solution. It’s operating in 2.4GHz, compatible with the IEEE 802.11b/g/n standard and Bluetooth BTv3.0+HS standard. The 802.
COMPANY CONFIDENTIAL 2. Product Functional Specification（draft） Standard IEEE802.11n/g/b; Data Rate 802.11b: 11, 5.5, 2, 1 Mbps; 802.11 g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: HT20 mode: 72.2, 65, 57.8, 43.3, 28.9, 21.7, 14.4, 7.2Mpbs HT40 mode: 150, 135, 120, 90, 60, 45, 30, 15Mbps 802.11b: CCK, DQPSK, DBPSK 802.11 g: 64QAM,16QAM, QPSK, BPSK 802.11n: MCS0, MCS4, MCS5, MCS6, MCS7 in HT20/HT40 Modes Modulation Techniques WLAN Frequency Range 2.400~2.
COMPANY CONFIDENTIAL 3. Product Requirements 3.1 Hardware Requirements WLAN Requirements Marvell’s 88W8787 is the IC of choice for the WLAN module with the following basic features enabled: Single band: 2.4GHz 802.11e (Quality of Service) 802.
COMPANY CONFIDENTIAL The requirement is to use 20 pins for the Host-Module interface. Here is an example of the pin-out signals. Table 1: Host-Module Connector Pin-out Signals GND SD_CMD GND SD_D1 SD_D0 1 2 3 4 5 20 19 18 17 16 SD_D2 SD_D3 GND 3.3V 3.3V 6 7 8 9 10 15 14 13 12 11 PDn RESETn VIO GND SLEEP_CLK (32.768kHz) GND HOST_WAKEUP# GND SD_CLK GND 3.2 Hardware Architecture The module design based on the MARVELL 88W8787 single chip integrated WiFi and BT MAC/Baseband/RF Which implements IEEE802.
COMPANY CONFIDENTIAL 3.3 Mechanical outline Drawing The WiFi module needs to be as small as possible. The target size of the module is 30mm x 15mm. We also want the height of the module to be as low as possible. PCB: FR4, 4layers, single side design Module size (W×L): 15mm ×30mm. 3.4 Software Requirements All software components and documentation, including user interface and help files are English version. For others language support need to be decided by mutual discussion. 3.4.1 Software setup 1.
COMPANY CONFIDENTIAL 3.4.2 Operating System Support The driver must support the following Operating Systems at product introduction: Linux, Microsoft Windows XP, Vista and Win7 drivers. 3.4.3 Software Functions The software must support the following functions: Auto scan to find AP nearby and show signal strength for each channel. Support WPA, WPA-PSK, WPA2, WPA2-PSK, WEP 64bit & 128bit, IEEE 802.11x, IEEE 802.11i Easily use software to upgrade from BTv2.1+EDR to BTv3.0 + HS 4.
COMPANY CONFIDENTIAL 6.2.2 Non-Operating Humidity conditions The product shall not be damaged nor shall the performance be degraded after exposure to relative humidity ranging from 5% to 95% non-condensing.
FCC Notice: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Canada Notice This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.
End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains IC: 2878D-J20H045”.
Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC.
Česky [Czech] Dansk [Danish] Deutsch [German] Eesti [Estonian] English Español [Spanish] Ελληνική [Greek] Français [French] Italiano [Italian] Latviski [Latvian] Lietuvių [Lithuanian] Nederlands [Dutch] Malti [Maltese] Magyar [Hungarian] Polski [Polish] Português [Portuguese] Slovensko [Slovenian] Slovensky [Slovak] Suomi [Finnish] Svenska [Swedish] [Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
