User's Manual

ManualsBrandsHON HAI Precision Ind ManualsElectronicsCisco Edge 340

Table Of Contents

Cisco Edge 340 Series Installation Guide

Cisco Systems, Inc.

www.cisco.com

Cisco Edge 340 Series Installation Guide

OL-29523-01

• About this Guide, page 1

• Cisco Edge 340 Series Accessories, page 2

• Overview of the Cisco Edge 340 Series, page 2

• Installing the Cisco Edge 340 Series, page 7

• Powering On the Cisco Edge 340 Series, page 10

• Resetting to Factory Mode, page 10

• Technical Specifications, page 10

• Regulatory Standards Compliance, page 11

• EMC Class B Notices, Warnings, and Safety Information, page 12

• Declaration of Conformity for RF Exposure, page 16

• Obtaining Documentation and Submitting a Service Request, page 18

About this Guide

This guide describes how to install the Cisco Edge 340 Series device and describes the LEDs and ports.

For configuration information, see the Cisco Edge 340 Series documentation on Cisco.com. For system

requirements, important notes, limitations, open and resolved bugs, and documentation updates, see the

release notes on Cisco.com.

Summary of content (18 pages)

PAGE 1
Cisco Edge 340 Series Installation Guide OL-29523-01 • About this Guide, page 1 • Cisco Edge 340 Series Accessories, page 2 • Overview of the Cisco Edge 340 Series, page 2 • Installing the Cisco Edge 340 Series, page 7 • Powering On the Cisco Edge 340 Series, page 10 • Resetting to Factory Mode, page 10 • Technical Specifications, page 10 • Regulatory Standards Compliance, page 11 • EMC Class B Notices, Warnings, and Safety Information, page 12 • Declaration of Conformity for RF Exposure,
PAGE 2
Cisco Edge 340 Series Accessories Cisco Edge 340 Series Accessories The following list shows the accessories that you can purchase for the Cisco Edge 340 Series device: • Power adapter • Power cord • Power cord retainer • WiFi external antenna • Console cable with RJ45 and DB9F • RS-232 cable for Digital Media Player (DMP) and Cisco LCD connectivity • Infrared Receiver (IR) remote control • IR extender Note All the accessories, except the Cisco Edge 340 Series chassis, should be purchased
PAGE 3
Overview of the Cisco Edge 340 Series Figure 1 Cisco Edge 340 Series—Front panel Wireless SKU f Cisco Edge 340 Series 1 2 3 4 5 6 7 8 Non-wireless SKU f 390142 Cisco Edge 340 Series Figure 2 1 SD card slot 5 Bluetooth status 2 USB ports 6 Storage status 3 Factory mode pinhole 7 Wifi status 4 Power button 8 Gigabit Ethernet (uplink) status Cisco Edge 340 Series—Rear Panel HDMI HDMI Audio IR Extension USB Console RS232 1 2 3 4 Out In 5 6 7 VGA GE 8 9 1 IR
PAGE 4
Overview of the Cisco Edge 340 Series Port Descriptions USB There are four USB 2.0 Type A ports. Two of them are on the front panel, and two on the rear panel. When the Cisco Edge 340 is powered by external power adapter, all four USB ports are enabled. The port marked with red outline on the rear panel can provide up to 5W power to a connected device. Each of the other three USB ports can provide up to 2.5W power.
PAGE 5
Overview of the Cisco Edge 340 Series VGA The VGA port can support 720p and 1080p HD video output with the maximum resolution of 1920x1200. Gigabit Ethernet The Gigabit Ethernet uplink port provides a 10/100/1000 Mb/s connection to other devices. Wireless Features WiFi Supports 802.11a/b/g/n dual-band wireless AP or client. Bluetooth Supports Bluetooth 4.0 and Human Interaction Design Protocol (HIDP) for remote control or input devices.
PAGE 6
Overview of the Cisco Edge 340 Series LEDs Figure 3 shows the LEDs on the front panel of the Cisco Edge 340 Series. Figure 3 Cisco Edge 340 Series LEDs on the Front Panel f 390141 Cisco Edge 340 Series 1 2 3 1 Bluetooth1 3 WiFi1 2 Storage status 4 Gigabit Ethernet uplink 4 1. Only for the CS-E340W Series Table 2 shows the color and meaning of each LED. Table 2 LEDs LED Color Meaning Power (behind power button) Off There is no power.
PAGE 7
Installing the Cisco Edge 340 Series Table 2 LEDs (continued) LED Color Meaning Gigabit Ethernet Off No link. Blue Link up. Blinking blue Activity. Off WiFi is disabled. Solid blue WiFi is enabled and functioning. Blinking blue WiFi is transmitting data. Off Bluetooth is disabled. Solid blue Bluetooth is enabled and functioning. Blinking blue Bluetooth is transmitting data. Off Storage is not active. Blinking blue Storage is active.
PAGE 8
Installing the Cisco Edge 340 Series • Humidity around the Cisco Edge 340 does not exceed 85 percent. • Altitude at the installation site is below 2000m. Warning Statements Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents.
PAGE 9
Installing the Cisco Edge 340 Series Warning To prevent the system from overheating, do not operate it in an area that exceeds the maximum recommended ambient temperature of: 113°F (45°C) Statement 1047 Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074 Warning To prevent airflow restriction, allow clearance around the ventilation openings to be at least: 3 inches (7.
PAGE 10
Powering On the Cisco Edge 340 Series Installing the Cisco Edge 340 Series on a Desk or Table You can use your desktop-mounting kit to install a Cisco Edge 340 on a desk or table vertically by using the desktop-mount bracket. For more information and detailed installation procedures, see Mounting the Kit Assembly (Desktop Mount) for Cisco Edge 340 Series. Powering On the Cisco Edge 340 Series Connect the power cord to an electrical outlet. Press the Power button to power on the Cisco Edge 340 Series.
PAGE 11
Regulatory Standards Compliance Regulatory Standards Compliance This section includes all the regulatory, safety, and EMC standards. Table 4 Regulatory Standards Compliance for the Cisco Edge 340 Series Specification Description Safety UL 60950-1 Second Edition CAN/CSA-C22.2 No. 60950-1 Second Edition EN 60950-1 Second Edition IEC 60950-1:2005 (Second Edition), Am 1:2009 AS/NZS 60950-1 GB4943.
PAGE 12
EMC Class B Notices, Warnings, and Safety Information EMC Class B Notices, Warnings, and Safety Information This section includes the EMC Class B warnings for the Cisco Edge 340 Series. Statement 2018—Class B Notice for FCC Modifying the equipment without Cisco’s authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices.
PAGE 13
EMC Class B Notices, Warnings, and Safety Information Canadian Compliance for the Cisco Edge 340 Series This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
PAGE 14
EMC Class B Notices, Warnings, and Safety Information Korea Application Statement This equipment generates radio frequency that may cause harmful interference. This equipment must not be co-located in the environment of human safety exposure. Statement 157—VCCI Compliance for Class B Equipment Warning This is a Class B product based on the standard of the VCCI Council. If this is used near a radio or television receiver in a domestic environment, it may cause radio Interference.
PAGE 15
EMC Class B Notices, Warnings, and Safety Information Compliance Statement for Taiwan Compliance Statement for Device Working at 2.
PAGE 16
Declaration of Conformity for RF Exposure Declaration of Conformity for RF Exposure This section contains information on compliance with guidelines related to RF exposure. This Device Meets International Guidelines for Exposure to Radio Waves The Cisco Edge 340 series device includes a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) recommended by international guidelines.
PAGE 17
Declaration of Conformity for RF Exposure The US Food and Drug Administration has stated that present scientific information does not indicate the need for any special precautions for the use of wireless devices. The FCC recommends that if you are interested in further reducing your exposure then you can easily do so by reorienting antennas away from the user or placing the antennas at a greater separation distance than recommended or lowering the transmitter power output.
PAGE 18
Obtaining Documentation and Submitting a Service Request Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html.