USER MANUAL HOMEVIZ OB10 Wireless Security Camera v1.
CONTENTS What’s in the Box 2 Product Overview 3 Specifications 4 Getting Started 4 Contact Us 18 1
WHAT’S IN THE BOX OB10 Wireless Security Camera × 1 Waterproof Cap × 1 9.8ft Power Adapter (12V/1A) Antenna × 1 Screw × 4 Anchor × 4 Quick Start Guide HOMEVIZ OB10 Wireless Security Camera V1.
PRODUCT OVERVIEW Reset Power Jack Antenna IR Lights White LED Lights LAN Lens Photosensitive Sensor IR Lights White LED Lights Speaker Reset microSD Card Slot MIC 3
SPECIFICATIONS Main Chip Sensor Viewing Angle Camera Alarm Trigger Storage XM530 Image output 2304 × 1296 (2K) 90° diagonally, 69° horizontally, 50° vertically 4 LED lights, 4 infrared lights Custom motion detection, human detection, area detection, etc. Supports up to 128GB microSD card Waterproof Level Network IP66 2.4GHz band GETTING STARTED 1.
2. Connecting to Power Insert a microSD card (not included) into the microSD slot. Then connect the camera to a wall outlet with the included power adapter. Reset Tip: To initialize the device, press and hold the reset button for about 10 seconds until you hear a prompt sound. 3. Setting up the Camera • Wireless Network Configuration Step 1: Open the "HOMEVIZ" app and tap "Login". (Please register first if you don't have an account.) Step 2: Tap "+".
Step 3: Tap "Wireless camera". Step 4: Tap "OB10 Security Camera". Step 5: Tap "Fast network configuration".
Enter the network name and password of your current Wi-Fi network and Tap "Next". Note: This device currently only supports 2.4GHz Wi-Fi. If you are using 5GHz Wi-Fi, please confirm that your Wi-Fi is compatible with 2.4GHz. Step 2 Connect to the network Step 2 Connect to the network saina-210 saina-210 Please enter WIFI password Please enter WIFIpassword Next Next Only search devices in the same LAN. Only search devices in the same LAN.
• Alarm Push To receive alerts and push notifications: Step 1: Tap . Step 2: Tap [Intelligent Alarm] to enter the alarm setting interface. Step 3: Enable"Humanoid Detection Switch", "APP Push", and "Allow Notifications". Customize alarm settings according to your needs.
• View Video Playback To playback video footage, ensure that an SD card (Max. 128GB, sold separately) is inserted into the camera. Step 1: Tap the device. Step 2: Tap [PlayBack].
• Night Alarm Light Setting Step 1: Tap on the device. Step 2: Tap [Vigilance]. Step 3: Enter the night alarm light settings page. There are three light modes: HUMAN SHAPE DETECTION, WARM LIGHT FULL COLOR and INFRARED MODE. • HUMAN SHAPE DETECTION: The white LED lights turn on only when human motion is detected at night, and a short full-color video clip is recorded. • WARM LIGHT FULL COLOR: The white LED lights stay on at night to record full-color night-time videos.
• Customize Alarm Voice Settings Step 1: Tap . Step 2: Tap [Intelligent Alarm]. Step 3: Tap [Alarm Sound]. Device List Intelligent alert b11b75a5b5cbebed Device Name b11b75a5b5cbebed Humanoid Detection Switch Turn the figure detection function on or off OSD Configuration Online Reginoal Settings Video Management Cordon Intelligent Alarm Time Synchronous 2020-12-29 09:38:19 East8.
Step 4: Tap the toggle switch next to [Alarm Sound] to enable or disable the alarm sound. If [Alarm Sound] is enabled, when the system detects an alarm situation, the set alarm sound will be heard. You can select from the system's built-in alarm sounds. If [Alarm Sound] is disabled, there will be no corresponding alarm sound when an alarm is triggered.
Option 1: Text-to-speech. Enter the desired alarm information in the text box, choose either a male or female voice, tap [Transformation] to proceed, tap [Listen] to listen, then tap [Upload prompt tone] to upload. Option 2: Record sound directly as the alarm message. Tap to record and tap [Listen] to listen after the recording is complete, then tap [Upload prompt tone] to upload.
• Alert Area Settings Step 1: Tap . Step 2: Tap [Intelligent Alarm]. Step 3: Tap [Alert Area] to enter the alert area settings interface. There is a variety of shapes for alert areas. Users can freely drag and adjust the size and rotation direction of the shape. An alarm will be automatically triggered only when motion is detected within the alarm zone. No alarm will be triggered by events outside the alarm zone.
• Cordon Settings Step 1: Tap . Step 2: Tap [Intelligent Alarm]. Step 3: Tap [Cordon] to enter the cordon settings interface. There are three modes for cordon settings. Users can freely drag and adjust the size and direction of the cordon. • From Left to Right: When a human body is detected moving from left to right, the alarm will be triggered automatically. • From Right to Left: When a human body is detected moving from right to left, an a larm will be triggered automatically.
• Sharing Setting Step 1: Tap . Step 2: Tap [Share to friend] and a screenshot with a QR code will be sent to your friend. After scanning the QR code using the HOMEVIZ app, your friend can access the camera and adjust the related settings.
• Master Account Protection Mechanism If [tip] is prompted when you are trying to bind the device, it means that the device has been bound to another account. You may try one of the following: 1. Unbind the original account: Contact the or original user to unbind the camera from its original account in the app (delete the camera from his/her HOMEVIZ account). Then you can bind the camera with your account. 2.
• Abnormal Situation If the following prompt appears or you have a problem when you connect the device for the first time, please contact us immediately and email the device's serial number (usually on the top or bottom of the camera) to support@homeviz.net. We will reply promptly and provide high-quality after-sales services. Add a camrea d71a73e8d040f89f d71a73e8d040f89f OK Error prompt The device has been bound with a master account.