ASSEMBLY INSTRUCTION 7 SPINDLES METAL QUEEN BED Headboard HE Foot board Extension Leg BI 'Side Rail Front 1pc 1pc PCs spices H Side Rail Rear Slats Front/ Rear I& Slats Center Support Leg spices PCs PCs PCs Lott Bolt Bolt Nut 1/4" =) NS PCs PCs 22pcs PCs Flat Washer Allen Wrench EI Wrench #16mm 4x4mm 11.3mm o> PCs 1pc 1pc This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
Assemble the headboard (A) to the extension leg (C) with PCs bolts (K) and PCs flat washer (M), then fastened using Allen wrench (N). Assemble the side rail front (D) to the side rail rear (E) with PCs bolts (K) and PCs flat washer (M), then fastened using Allen wrench (N).
Assemble the side rail the extension leg (C) and the foot board (B) with PCs bolts (1), PCs bolts (K), PCs nuts (L), and PCs flat washer (M), then fastened using Allen wrench (N) and wrench (O). Assemble the slats front / rear (F) and slats center (G) to the support leg (H) with 1pe bolt (J) and 1pc flat washer (M) for each support leg (H), then fastened using Allen wrench (N).
Assemble the slats front / rear (F) and slats center (G) to the side rail (D & E) with 1pc bolt (K), 1pc flat washer (M) for each end of slats front / rear (F) and slats center (G), then fastened using Allen wrench (N). A WARNINGS: Do not remove warning label from bed. Use only mattress which is long and wide. Do not allow horseplay or under the bed and prohibit jumping on the bed.