Instructions / Assembly

ASSEMBLY INSTRUCTION

E217(N1) CURVED BACK TUFTED DINING CHAIR

Chair Body

Front Leg

Back Leg

Lock Washer

M8x12mm

2pcs 8pcs2pcs1pc

Flat Washer

M8x22mm

Bolt

M8x70mm

Bolt

M8x50mm

Allen Key

4pcs 1pc4pcs8pcs

This page lists all the contents included in

the box. Please take the time to identify

the hardware as well as the individual

components to this product.

As you

unpack and prepare for assembly, place

the contents on a carpeted or padded

area to protect them from damage.

PAGE 1
ASSEMBLY INSTRUCTION E217(N1) CURVED BACK TUFTED DINING CHAIR A Chair Body B Front Leg C Back Leg D Lock Washer M8x12mm 1pc E Flat Washer M8x22mm 2pcs F Bolt M8x70mm 2pcs G Bolt M8x50mm 8pcs H Allen Key M5 8pcs 4pcs 4pcs 1pc This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
1 Attach the Front Leg (B) to Chair Body (A) with Lock Washer (D), Flat Washer (E) and Bolt (F) by Allen Key (H). The smooth side faces inward E D F H B B Take the Allen Key, and turn the bolts until the legs are secure. DO NOT TIGHTEN COMPLETELY. Stop when you feel you are adding force to tighten the bolt.
PAGE 3
2 Attach the Back Leg (C) to Chair Body (A) with Lock Washer (D), Flat Washer (E) and Bolt (G) by Allen Key (H). Stand chair up on an even surface and check that it is balanced. If there is a slight wobble, apply downward pressure in the corner where a leg is uneven. Keeping pressure in that corner, tighten all bolts. If balanced, apply downward pressure evenly in the center and tighten all bolts. Do not over-tighten beyond hole depth.