Instructions / Assembly

ManualsBrandsHomeSullivan ManualsBookcases76 in. Natural Gold Metal 4-Shelf Half Moon Accent Bookcase

ASSEMBLY INSTRUCTION

887-12 HALF MOON BOOKCASE WITH SHELVES

1 PC

2 PCS

1 PC 2 PCS

This page lists all the contents included in

the box. Please take the time to identify

the hardware as well as the individual

components to this product. As you

unpack and prepare for assembly, place

the contents on a carpeted or padded

area to protect them from damage.

Back Frame

Front Frame

Top and Bottom Rail

Short Shelf

Rail

8 PCS

Long Shelf

2 PCS

1 PC

Bottom Rail

1 PC

Allen Key

16 PCS

Screw

1/4" x 1"

42 PCS

1/4" x 5/8"

Bolt

1 PC

1-1/2" x 3/4" x 1/8"

Connecting Plate (use

in Alternative #1 only)

2 PCS

Long Screw

4 x 1-3/4"

(Anti-Tipping Kit)

Short Screw

4 x 5/8"

(Anti-Tipping Kit)

2 PCS

Metal Bracket

46 x 20mm

(Anti-Tipping Kit)

590mm

(Anti-Tipping Kit)

Restraint Strap

2 PCS 1 PC

Summary of content (7 pages)

PAGE 1
ASSEMBLY INSTRUCTION 887-12 HALF MOON BOOKCASE WITH SHELVES Back Frame Front Frame Top and Bottom Rail 1 PC 1 PC 2 PCS Rail Long Shelf Short Shelf 8 PCS 2 PCS 2 PCS Bottom Rail Connecting Plate (use in Alternative #1 only) 1-1/2" x 3/4" x 1/8" Bolt 1/4" x 5/8" 1 PC 1 PC 42 PCS Screw 1/4" x 1" Allen Key M4 Long Screw 4 x 1-3/4" (Anti-Tipping Kit) 16 PCS 1 PC 2 PCS Short Screw 4 x 5/8" (Anti-Tipping Kit) Metal Bracket 46 x 20mm (Anti-Tipping Kit) Restraint Strap 590mm (Anti-Tipping K
PAGE 2
Insert Top and Bottom Rail (C) and Rail (D) to Back Frame (A) using Bolt (I) with Allen Key (K). Note: Do not fully tighten the bolts at this step. K C I I K D I K A C Attach Front Frame (B) to Top and Bottom Rail (C) and Rail (D) using Bolt (I) with Allen Key (K). Note: Do not fully tighten the bolts at this step.
PAGE 3
Insert Bottom Rail (G) to Back Frame (A) and Front Frame (B) using Bolt (I) with Allen Key (K). Note: Do not fully tighten the bolts at this step. B I C K A D G C Attach Long Shelf (E) and Short Shelf (F) to Rail (D) using Screw (J) with Drill Bit (not provided). Note: Fully tighten all bolts at this step.
PAGE 4
With assistance from your adult partners, turn the Bookcase right way up. Adjust the pre-installed levelers on the bottom of Back Frame (A) and Front Frame (B) until the Bookcase is level with the ground. B A Adjust Pre-installed Levelers height to achieve balance. Fix Metal Bracket (N) on the wall using Long Screw (L) with Drill Bit (not provided) as shown below.
PAGE 5
Move the Bookcase back against the wall. Fix Metal Bracket (N) on the bottom of Long Shelf (E) using Short Screw (M) with Drill Bit (not provided). Pull the Restraint Strap (O) through the Metal Bracket (N) on the wall and Long Shelf (E) and pull the Restraint Strap (O) tight.
PAGE 6
Alternative Modular Configurations for Purchasing 2pcs Bookcases Alternative #1 Fix Top and Bottom Rail (C) of 2pcs of Bookcases using Connecting Iron Plate (H) and Bolt (I) with Allen Key (K).
PAGE 7
Alternative Modular Configurations for Purchasing 2pcs Bookcases Alternative #2 Put two pieces of Bookcases as shown below. Alternative #3 Put two pieces of Bookcases as shown below. Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.