Instructions / Assembly

ManualsBrandsHomeSullivan ManualsFurnitureWhite Metal Arches Twin Platform Bed

Table Of Contents

This page lists all the contents included

in the box. Please take the time to

identify the hardware as well as the

individual components to this product.

As you unpack and prepare for

assembly, place the contents on a

carpeted or padded area to protect

them from damage.

ASSEMBLY INSTRUCTION

Ratchet Tool

4mm

1PC

Slat Connector

32PCS

Rear Rail Section

2PCS

Wrench

5/16"-1/4"

1PC

Bolt

1/4"*16mm

20PCS

Support Leg

2PCS

1PC

Bolt

1/4"*46mm

4PCS

Center Support Bar

1PC

124BT METAL ARCH DESIGN TWIN PLATFORM BED

Headboard Leg Headboard Footboard

Nut

1/4"

4PCS

16PCS

2PCS

Slat

Front Rail Section

Summary of content (4 pages)

PAGE 1
ASSEMBLY INSTRUCTION 124BT METAL ARCH DESIGN TWIN PLATFORM BED Headboard Leg Headboard Footboard Front Rail Section 2PCS Rear Rail Section 1PC Support Leg 1PC Center Support Bar 2PCS Slat 2PCS Slat Connector 2PCS Bolt 1/4"*16mm 1PC Bolt 1/4"*46mm 16PCS Nut 1/4" 32PCS Ratchet Tool 4mm 20PCS Wrench 5/16"-1/4" 4PCS 4PCS 1PC 1PC This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 2
How to Use the Ratchet Tool (M) 1. Before assembling the furniture, please adjust the lock as needed. Lock on the right to loosen bolts! Lock on the left to tighten bolts! 2. Tighten or loosen bolts. Tighten bolts: Locate the turncap and rotate it clockwise to screw the bolt quickly until it cannot be rotated any more. Then start rotating the handle clockwise to finalize tightening the bolt. Turncap Handle Loosen bolts: Rotate the handle counterclockwise to loosen the bolt.
PAGE 3
Attach the Headboard Leg (A) to the Headboard (B), insert the Bolt (J), turn the Ratchet Tool (M) to tighten them. B B M J A A A Attach the Front Rail Section (D), Rear Rail Section (E) and Center Support Bar (G), insert the Bolt (J), Bolt (K) and Nut (L), turn the Ratchet Tool (M) and Wrench (N) to tighten them. J M D J K D G L N E E G E D Attach the Support Leg (F) to Center Support Bar (G), and then insert the Bolt (J), turn the Ratchet Tool (M) to tighten them.
PAGE 4
Attach the assembled metal frame to the Headboard Leg (A), Headboard (B) and Footboard (C), insert the Bolt (J), turn the Ratchet Tool (M) to tighten them. B M B J A E A D A D E C Insert the Slat Connector (I) to the both sides of Slat (H), press the Slat (H) into the correct place. I I H I H H I Attach the Slat (H) to rails, put the Slat Connectors (I) into the correct places and press them down. I H E E I D D H E Cleaning & Care Treat surface with care.